Multiple sensors example

[kspearAus]

It would be very helpful to see an example using two sensors SHT4x sensors SHT41 in my case.
If is not something that you are inclined to do, I would be grateful to be pointed in the right direction to figure it out myself.
Cheers,

[kspearAus]

//I was able to hack my way through
#include <Arduino.h>
#include "SevenSemiSht4x.h"
#include <Wire.h>

// I2C buses
TwoWire I2C_1 = TwoWire(0);
TwoWire I2C_2 = TwoWire(1);

Sht4x_Sensor Sht1;
Sht4x_Sensor Sht2;
static char Err1_MSG[64];
static int16_t Err1;

static char Err2_MSG[64];
static int16_t Err2;

String fname = String(FILE); //
int fnlength = fname.length();
int less14 = fnlength - 14;
int less4 = fnlength - 4;
String shortfn = fname.substring(less14, less4);

void setup() {

Serial.begin(115200);
delay(500);
Serial.println("file: " + String(fname));
I2C_1.begin(21, 22); // SDA, SCL for sensor 1
I2C_2.begin(19, 18); // SDA, SCL for sensor 2

Sht1.begin(I2C_1, SHT40_I2C_ADDR_44);
Sht1.softReset();
Sht2.begin(I2C_2, SHT40_I2C_ADDR_44);
Sht2.softReset();
delay(10);

// #1
uint32_t sn1 = 0;
Err1 = Sht1.serialNumber(sn1);
if (Err1 != 0) { Serial.print("Error : ");
err_discription(Err1, Err1_MSG, sizeof Err1_MSG);
Serial.println(Err1_MSG); eturn; }
Serial.println("sn1: " + String(sn1));
// #2
uint32_t sn2 = 0;
Err2 = Sht2.serialNumber(sn2);
if (Err2 != 0) { Serial.print("Error : ");
err_discription(Err2, Err2_MSG, sizeof Err2_MSG);
Serial.println(Err2_MSG); return; }
Serial.println("sn2: " + String(sn2));
}

void loop() {
float Temp1 = 0.0; float Hum1 = 0.0;
float Temp2 = 0.0; float Hum2 = 0.0;
delay(100);
Err1 = Sht1.measureLowestPrecision(Temp1, Hum1);
if (Err1 != 0) { Serial.print("Error1 : ");
err_discription(Err1, Err1_MSG, sizeof Err1_MSG);
Serial.println(Err1_MSG); return; }
Serial.print("srt1: " + String(Temp1) + "c " + String(Hum1));

//2
 Err2 = Sht2.measureLowestPrecision(Temp2, Hum2);
if (Err2 != 0)     { Serial.print("Error2 : ");
    err_discription(Err2, Err2_MSG, sizeof Err2_MSG);
    Serial.println(Err2_MSG);    return;    }
Serial.println("   srt2: " + String(Temp2) + "c  " + String(Hum2));

delay(500);
}