arm64: dts: qcom: x1e80100: Fix usb_2 controller interrupts

commit 6804210 upstream.

Back when the CRD support was brought up, the usb_2 controller didn't
have anything connected to it in order to test it properly, so it was
never enabled.

On the Lenovo ThinkPad T14s, the usb_2 controller has the fingerprint
controller connected to it. So enabling it, proved that the interrupts
lines were wrong from the start.

Fix both the pwr_event and the DWC ctrl_irq lines, according to
documentation.

Fixes: 4af46b7 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Cc: [email protected]	# 6.9
Signed-off-by: Abel Vesa <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Tested-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/20250107-x1e80100-fix-usb2-controller-irqs-v1-1-4689aa9852a7@linaro.org
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: abelvesa

arch/arm64/boot/dts/qcom/x1e80100.dtsi

@@ -4115,7 +4115,7 @@
 					  <&gcc GCC_USB20_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 50 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 49 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "pwr_event",
@@ -4141,7 +4141,7 @@
 			usb_2_dwc3: usb@a200000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a200000 0 0xcd00>;
-				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x14e0 0x0>;
 				phys = <&usb_2_hsphy>;
 				phy-names = "usb2-phy";