| description | Microhard Pico DDL carrier supporting USB C power delivery and battery power up to 55V |
|---|---|
| cover | ../../.gitbook/assets/IMG_3931 edited.JPG |
| coverY | 0 |
ARK Microhard DDL Carrier Connections
BAT - 2 Pin Molex Nano-Fit 1054301202 - Mates with 45130
| Pin Number | Signal Name | Voltage |
|---|---|---|
| 1 | BAT_IN | 5.5V - 55V |
| 2 | GND | GND |
| Pin Number | Signal Name | Voltage |
|---|---|---|
| 1 | LAN_RD_N | 50V |
| 2 | LAN_RD_P | 50V |
| 3 | LAN_TD_N | 50V |
| 4 | LAN_TD_P | 50V |
| Pin Number | Signal Name | Voltage |
|---|---|---|
| 1 | WAN_RD_N | 50V |
| 2 | WAN_RD_P | 50V |
| 3 | WAN_TD_N | 50V |
| 4 | WAN_TD_P | 50V |
| Pin Number | Signal Name | Voltage |
|---|---|---|
| 1 | No Connect | No Connect |
| 2 | FC_TX_OUT_RADIO_RX_IN_EXT | 3.3V |
| 3 | FC_RX_IN_RADIO_TX_OUT_EXT | 3.3V |
| 4 | FC_CTS_IN_RADIO_CTS_OUT_EXT | 3.3V |
| 5 | FC_RTS_OUT_RADIO_RTS_IN_EXT | 3.3V |
| 6 | GND | GND |
- Remove all connections from the board.
- Place the thermal pad on the copper in the socket.
- Insert the Microhard module with the antenna connectors nearest to the edge of the board.
- Remove all connections from the board.
- Using a small screwdriver, pry the non-antenna connector corner from the socket. Being careful to not damage the PCB or socket. Prying against the metal RF shield works well.
- Remove the thermal pad.