[DISCO_F469NI] Add Serial Flow Control pins

Author: bcostm

hal/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F469NI/PeripheralPins.c

@@ -232,6 +232,28 @@ const PinMap PinMap_UART_RX[] = {
     {NC,    NC,     0}
 };
 
+const PinMap PinMap_UART_RTS[] = {
+    {PA_1,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+    {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+    {PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+    {PD_4,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+    {PD_12, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+    {PG_8,  UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+    {PG_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+    {NC,    NC,     0}
+};
+
+const PinMap PinMap_UART_CTS[] = {
+    {PA_0,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+    {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+    {PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+    {PD_3,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+    {PD_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+    {PG_13, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+    {PG_15, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+    {NC,    NC,     0}
+};
+ 
 //*** SPI ***
 
 const PinMap PinMap_SPI_MOSI[] = {

hal/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F469NI/objects.h

@@ -74,6 +74,11 @@ struct serial_s {
     uint32_t parity;
     PinName pin_tx;
     PinName pin_rx;
+#if DEVICE_SERIAL_FC
+    uint32_t hw_flow_ctl;
+    PinName pin_rts;
+    PinName pin_cts;
+#endif
 };
 
 struct spi_s {