Use serial configuration from platform

mbed added configuration options for default serial baud rate and stdio baud rate, so we can get rid of the workaround in the HAL

Author: stevew817

targets/TARGET_Silicon_Labs/TARGET_EFM32/TARGET_EFM32GG/TARGET_EFM32GG_STK3700/device_peripherals.h

@@ -36,9 +36,6 @@
 /* USB */
 #define USB_TIMER USB_TIMER1
 
-/* STDIO */
-#define STDIO_UART UART0
-
 /* Clocks */
 
 /* Clock definitions */

targets/TARGET_Silicon_Labs/TARGET_EFM32/TARGET_EFM32HG/TARGET_EFM32HG_STK3400/device_peripherals.h

@@ -36,9 +36,6 @@
 /* USB */
 #define USB_TIMER USB_TIMER2
 
-/* STDIO */
-#define STDIO_UART USART1
-
 /* Clocks */
 
 /* Clock definitions */

targets/TARGET_Silicon_Labs/TARGET_EFM32/TARGET_EFM32LG/TARGET_EFM32LG_STK3600/device_peripherals.h

@@ -36,9 +36,6 @@
 /* USB */
 #define USB_TIMER USB_TIMER1
 
-/* STDIO */
-#define STDIO_UART UART0
-
 /* Clocks */
 
 /* Clock definitions */

targets/TARGET_Silicon_Labs/TARGET_EFM32/TARGET_EFM32PG/TARGET_EFM32PG_STK3401/device_peripherals.h

@@ -33,9 +33,6 @@
 #define PWM_TIMER_CLOCK  cmuClock_TIMER1
 #define PWM_ROUTE        TIMER_ROUTE_LOCATION_LOC1
 
-/* STDIO */
-#define STDIO_UART        USART0
-
 /* Clocks */
 
 /* Clock definitions */

targets/TARGET_Silicon_Labs/TARGET_EFM32/TARGET_EFM32WG/TARGET_EFM32WG_STK3800/device_peripherals.h

@@ -36,9 +36,6 @@
 /* USB */
 #define USB_TIMER USB_TIMER1
 
-/* STDIO */
-#define STDIO_UART UART0
-
 /* Clocks */
 
 /* Clock definitions */

targets/TARGET_Silicon_Labs/TARGET_EFM32/TARGET_EFM32ZG/TARGET_EFM32ZG_STK3200/device_peripherals.h

@@ -33,9 +33,6 @@
 #define PWM_TIMER_CLOCK cmuClock_TIMER0
 #define PWM_ROUTE TIMER_ROUTE_LOCATION_LOC0
 
-/* STDIO */
-#define STDIO_UART LEUART0
-
 /* Clocks */
 
 /* Clock definitions */

targets/TARGET_Silicon_Labs/TARGET_EFM32/serial_api.c

@@ -567,9 +567,6 @@ static void serial_set_route(serial_t *obj)
 
 void serial_init(serial_t *obj, PinName tx, PinName rx)
 {
-    uint32_t baudrate;
-    uint32_t uart_for_stdio = false;
-
     serial_preinit(obj, tx, rx);
 
     if(LEUART_REF_VALID(obj->serial.periph.leuart)) {
@@ -590,18 +587,8 @@ void serial_init(serial_t *obj, PinName tx, PinName rx)
 
     CMU_ClockEnable(serial_get_clock(obj), true);
 
-    /* Limitations of board controller: CDC port only supports 115kbaud */
-    if(((tx == STDIO_UART_TX) || (rx == STDIO_UART_RX))
-       && (obj->serial.periph.uart == (USART_TypeDef*)STDIO_UART )
-      ) {
-        baudrate = 115200;
-        uart_for_stdio = true;
-    } else {
-        baudrate = 9600;
-    }
-
     /* Configure UART for async operation */
-    uart_init(obj, baudrate, ParityNone, 1);
+    uart_init(obj, MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE, ParityNone, 1);
 
     /* Enable pins for UART at correct location */
     serial_set_route(obj);
@@ -615,7 +602,7 @@ void serial_init(serial_t *obj, PinName tx, PinName rx)
     }
 
     /* If this is the UART to be used for stdio, copy it to the stdio_uart struct */
-    if(uart_for_stdio) {
+    if(obj == &stdio_uart) {
         stdio_uart_inited = 1;
         memcpy(&stdio_uart, obj, sizeof(serial_t));
     }