clk: imx8mm: use correct mux type for clkout path

The mux in the clkout path needs the current selected parent to
be enabled for the switch to work. Use the correct mux type
to have the clk framework take care of this requirement.

Fixes: c1ae5c6 ("clk: imx8mm: add clkout1/2 support")
Signed-off-by: Lucas Stach <[email protected]>
Reviewed-by: Abel Vesa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abel Vesa <[email protected]>

Author: lynxeye-dev

drivers/clk/imx/clk-imx8mm.c

@@ -407,10 +407,10 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MM_SYS_PLL2_500M] = imx_clk_hw_fixed_factor("sys_pll2_500m", "sys_pll2_500m_cg", 1, 2);
 	hws[IMX8MM_SYS_PLL2_1000M] = imx_clk_hw_fixed_factor("sys_pll2_1000m", "sys_pll2_out", 1, 1);
 
-	hws[IMX8MM_CLK_CLKOUT1_SEL] = imx_clk_hw_mux("clkout1_sel", base + 0x128, 4, 4, clkout_sels, ARRAY_SIZE(clkout_sels));
+	hws[IMX8MM_CLK_CLKOUT1_SEL] = imx_clk_hw_mux2("clkout1_sel", base + 0x128, 4, 4, clkout_sels, ARRAY_SIZE(clkout_sels));
 	hws[IMX8MM_CLK_CLKOUT1_DIV] = imx_clk_hw_divider("clkout1_div", "clkout1_sel", base + 0x128, 0, 4);
 	hws[IMX8MM_CLK_CLKOUT1] = imx_clk_hw_gate("clkout1", "clkout1_div", base + 0x128, 8);
-	hws[IMX8MM_CLK_CLKOUT2_SEL] = imx_clk_hw_mux("clkout2_sel", base + 0x128, 20, 4, clkout_sels, ARRAY_SIZE(clkout_sels));
+	hws[IMX8MM_CLK_CLKOUT2_SEL] = imx_clk_hw_mux2("clkout2_sel", base + 0x128, 20, 4, clkout_sels, ARRAY_SIZE(clkout_sels));
 	hws[IMX8MM_CLK_CLKOUT2_DIV] = imx_clk_hw_divider("clkout2_div", "clkout2_sel", base + 0x128, 16, 4);
 	hws[IMX8MM_CLK_CLKOUT2] = imx_clk_hw_gate("clkout2", "clkout2_div", base + 0x128, 24);