clk: tegra: Mark external clocks as not having reset control

The external clocks don't have reset bits as they don't belong to any
specific hardware unit. Mark them as not having reset control for
consistency.

Signed-off-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>

Author: digetx

drivers/clk/tegra/clk-tegra-periph.c

@@ -712,9 +712,9 @@ static struct tegra_periph_init_data periph_clks[] = {
 	MUX8("ndflash", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDFLASH, 13, TEGRA_PERIPH_ON_APB, tegra_clk_ndflash_8),
 	MUX8("ndspeed", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDSPEED, 80, TEGRA_PERIPH_ON_APB, tegra_clk_ndspeed_8),
 	MUX8("hdmi", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_HDMI, 51, 0, tegra_clk_hdmi),
-	MUX8("extern1", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN1, 120, 0, tegra_clk_extern1),
-	MUX8("extern2", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN2, 121, 0, tegra_clk_extern2),
-	MUX8("extern3", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN3, 122, 0, tegra_clk_extern3),
+	MUX8("extern1", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN1, 120, TEGRA_PERIPH_NO_RESET, tegra_clk_extern1),
+	MUX8("extern2", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN2, 121, TEGRA_PERIPH_NO_RESET, tegra_clk_extern2),
+	MUX8("extern3", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN3, 122, TEGRA_PERIPH_NO_RESET, tegra_clk_extern3),
 	MUX8("soc_therm", mux_pllm_pllc_pllp_plla, CLK_SOURCE_SOC_THERM, 78, TEGRA_PERIPH_ON_APB, tegra_clk_soc_therm),
 	MUX8("soc_therm", mux_clkm_pllc_pllp_plla, CLK_SOURCE_SOC_THERM, 78, TEGRA_PERIPH_ON_APB, tegra_clk_soc_therm_8),
 	MUX8("vi_sensor", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI_SENSOR, 164, TEGRA_PERIPH_NO_RESET, tegra_clk_vi_sensor_8),