Skip to content

Commit 721b595

Browse files
iwamatsu-tthierryreding
authored andcommitted
pwm: visconti: Add Toshiba Visconti SoC PWM support
Add driver for the PWM controller on Toshiba Visconti ARM SoC. Signed-off-by: Nobuhiro Iwamatsu <[email protected]> Reviewed-by: Uwe Kleine-König <[email protected]> [[email protected]: fix up a couple of checkpatch warnings] Signed-off-by: Thierry Reding <[email protected]>
1 parent b0221e7 commit 721b595

File tree

3 files changed

+200
-0
lines changed

3 files changed

+200
-0
lines changed

drivers/pwm/Kconfig

Lines changed: 9 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -601,6 +601,15 @@ config PWM_TWL_LED
601601
To compile this driver as a module, choose M here: the module
602602
will be called pwm-twl-led.
603603

604+
config PWM_VISCONTI
605+
tristate "Toshiba Visconti PWM support"
606+
depends on ARCH_VISCONTI || COMPILE_TEST
607+
help
608+
PWM Subsystem driver support for Toshiba Visconti SoCs.
609+
610+
To compile this driver as a module, choose M here: the module
611+
will be called pwm-visconti.
612+
604613
config PWM_VT8500
605614
tristate "vt8500 PWM support"
606615
depends on ARCH_VT8500 || COMPILE_TEST

drivers/pwm/Makefile

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -56,4 +56,5 @@ obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o
5656
obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o
5757
obj-$(CONFIG_PWM_TWL) += pwm-twl.o
5858
obj-$(CONFIG_PWM_TWL_LED) += pwm-twl-led.o
59+
obj-$(CONFIG_PWM_VISCONTI) += pwm-visconti.o
5960
obj-$(CONFIG_PWM_VT8500) += pwm-vt8500.o

drivers/pwm/pwm-visconti.c

Lines changed: 190 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,190 @@
1+
// SPDX-License-Identifier: GPL-2.0-only
2+
/*
3+
* Toshiba Visconti pulse-width-modulation controller driver
4+
*
5+
* Copyright (c) 2020 - 2021 TOSHIBA CORPORATION
6+
* Copyright (c) 2020 - 2021 Toshiba Electronic Devices & Storage Corporation
7+
*
8+
* Authors: Nobuhiro Iwamatsu <[email protected]>
9+
*
10+
* Limitations:
11+
* - The fixed input clock is running at 1 MHz and is divided by either 1,
12+
* 2, 4 or 8.
13+
* - When the settings of the PWM are modified, the new values are shadowed
14+
* in hardware until the PIPGM_PCSR register is written and the currently
15+
* running period is completed. This way the hardware switches atomically
16+
* from the old setting to the new.
17+
* - Disabling the hardware completes the currently running period and keeps
18+
* the output at low level at all times.
19+
*/
20+
21+
#include <linux/err.h>
22+
#include <linux/io.h>
23+
#include <linux/module.h>
24+
#include <linux/of_device.h>
25+
#include <linux/platform_device.h>
26+
#include <linux/pwm.h>
27+
28+
#define PIPGM_PCSR(ch) (0x400 + 4 * (ch))
29+
#define PIPGM_PDUT(ch) (0x420 + 4 * (ch))
30+
#define PIPGM_PWMC(ch) (0x440 + 4 * (ch))
31+
32+
#define PIPGM_PWMC_PWMACT BIT(5)
33+
#define PIPGM_PWMC_CLK_MASK GENMASK(1, 0)
34+
#define PIPGM_PWMC_POLARITY_MASK GENMASK(5, 5)
35+
36+
struct visconti_pwm_chip {
37+
struct pwm_chip chip;
38+
void __iomem *base;
39+
};
40+
41+
static inline struct visconti_pwm_chip *visconti_pwm_from_chip(struct pwm_chip *chip)
42+
{
43+
return container_of(chip, struct visconti_pwm_chip, chip);
44+
}
45+
46+
static int visconti_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
47+
const struct pwm_state *state)
48+
{
49+
struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip);
50+
u32 period, duty_cycle, pwmc0;
51+
52+
if (!state->enabled) {
53+
writel(0, priv->base + PIPGM_PCSR(pwm->hwpwm));
54+
return 0;
55+
}
56+
57+
/*
58+
* The biggest period the hardware can provide is
59+
* (0xffff << 3) * 1000 ns
60+
* This value fits easily in an u32, so simplify the maths by
61+
* capping the values to 32 bit integers.
62+
*/
63+
if (state->period > (0xffff << 3) * 1000)
64+
period = (0xffff << 3) * 1000;
65+
else
66+
period = state->period;
67+
68+
if (state->duty_cycle > period)
69+
duty_cycle = period;
70+
else
71+
duty_cycle = state->duty_cycle;
72+
73+
/*
74+
* The input clock runs fixed at 1 MHz, so we have only
75+
* microsecond resolution and so can divide by
76+
* NSEC_PER_SEC / CLKFREQ = 1000 without losing precision.
77+
*/
78+
period /= 1000;
79+
duty_cycle /= 1000;
80+
81+
if (!period)
82+
return -ERANGE;
83+
84+
/*
85+
* PWMC controls a divider that divides the input clk by a
86+
* power of two between 1 and 8. As a smaller divider yields
87+
* higher precision, pick the smallest possible one.
88+
*/
89+
if (period > 0xffff) {
90+
pwmc0 = ilog2(period >> 16);
91+
if (WARN_ON(pwmc0 > 3))
92+
return -EINVAL;
93+
} else {
94+
pwmc0 = 0;
95+
}
96+
97+
period >>= pwmc0;
98+
duty_cycle >>= pwmc0;
99+
100+
if (state->polarity == PWM_POLARITY_INVERSED)
101+
pwmc0 |= PIPGM_PWMC_PWMACT;
102+
writel(pwmc0, priv->base + PIPGM_PWMC(pwm->hwpwm));
103+
writel(duty_cycle, priv->base + PIPGM_PDUT(pwm->hwpwm));
104+
writel(period, priv->base + PIPGM_PCSR(pwm->hwpwm));
105+
106+
return 0;
107+
}
108+
109+
static void visconti_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
110+
struct pwm_state *state)
111+
{
112+
struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip);
113+
u32 period, duty, pwmc0, pwmc0_clk;
114+
115+
period = readl(priv->base + PIPGM_PCSR(pwm->hwpwm));
116+
duty = readl(priv->base + PIPGM_PDUT(pwm->hwpwm));
117+
pwmc0 = readl(priv->base + PIPGM_PWMC(pwm->hwpwm));
118+
pwmc0_clk = pwmc0 & PIPGM_PWMC_CLK_MASK;
119+
120+
state->period = (period << pwmc0_clk) * NSEC_PER_USEC;
121+
state->duty_cycle = (duty << pwmc0_clk) * NSEC_PER_USEC;
122+
if (pwmc0 & PIPGM_PWMC_POLARITY_MASK)
123+
state->polarity = PWM_POLARITY_INVERSED;
124+
else
125+
state->polarity = PWM_POLARITY_NORMAL;
126+
127+
state->enabled = true;
128+
}
129+
130+
static const struct pwm_ops visconti_pwm_ops = {
131+
.apply = visconti_pwm_apply,
132+
.get_state = visconti_pwm_get_state,
133+
.owner = THIS_MODULE,
134+
};
135+
136+
static int visconti_pwm_probe(struct platform_device *pdev)
137+
{
138+
struct device *dev = &pdev->dev;
139+
struct visconti_pwm_chip *priv;
140+
int ret;
141+
142+
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
143+
if (!priv)
144+
return -ENOMEM;
145+
146+
priv->base = devm_platform_ioremap_resource(pdev, 0);
147+
if (IS_ERR(priv->base))
148+
return PTR_ERR(priv->base);
149+
150+
platform_set_drvdata(pdev, priv);
151+
152+
priv->chip.dev = dev;
153+
priv->chip.ops = &visconti_pwm_ops;
154+
priv->chip.npwm = 4;
155+
156+
ret = pwmchip_add(&priv->chip);
157+
if (ret < 0)
158+
return dev_err_probe(&pdev->dev, ret, "Cannot register visconti PWM\n");
159+
160+
return 0;
161+
}
162+
163+
static int visconti_pwm_remove(struct platform_device *pdev)
164+
{
165+
struct visconti_pwm_chip *priv = platform_get_drvdata(pdev);
166+
167+
pwmchip_remove(&priv->chip);
168+
169+
return 0;
170+
}
171+
172+
static const struct of_device_id visconti_pwm_of_match[] = {
173+
{ .compatible = "toshiba,visconti-pwm", },
174+
{ }
175+
};
176+
MODULE_DEVICE_TABLE(of, visconti_pwm_of_match);
177+
178+
static struct platform_driver visconti_pwm_driver = {
179+
.driver = {
180+
.name = "pwm-visconti",
181+
.of_match_table = visconti_pwm_of_match,
182+
},
183+
.probe = visconti_pwm_probe,
184+
.remove = visconti_pwm_remove,
185+
};
186+
module_platform_driver(visconti_pwm_driver);
187+
188+
MODULE_LICENSE("GPL v2");
189+
MODULE_AUTHOR("Nobuhiro Iwamatsu <[email protected]>");
190+
MODULE_ALIAS("platform:pwm-visconti");

0 commit comments

Comments
 (0)