Merge tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
 "Here is the big set of char/misc driver changes for 5.15-rc1.

  Lots of different driver subsystems are being updated in here,
  notably:

   - mhi subsystem update

   - fpga subsystem update

   - coresight/hwtracing subsystem update

   - interconnect subsystem update

   - nvmem subsystem update

   - parport drivers update

   - phy subsystem update

   - soundwire subsystem update

  and there are some other char/misc drivers being updated as well:

   - binder driver additions

   - new misc drivers

   - lkdtm driver updates

   - mei driver updates

   - sram driver updates

   - other minor driver updates.

  Note, there are no habanalabs driver updates in this pull request,
  that will probably come later before -rc1 is out in a different
  request.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
  Revert "bus: mhi: Add inbound buffers allocation flag"
  misc/pvpanic: fix set driver data
  VMCI: fix NULL pointer dereference when unmapping queue pair
  char: mware: fix returnvar.cocci warnings
  parport: remove non-zero check on count
  soundwire: cadence: do not extend reset delay
  soundwire: intel: conditionally exit clock stop mode on system suspend
  soundwire: intel: skip suspend/resume/wake when link was not started
  soundwire: intel: fix potential race condition during power down
  phy: qcom-qmp: Add support for SM6115 UFS phy
  dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
  phy: qmp: Provide unique clock names for DP clocks
  lkdtm: remove IDE_CORE_CP crashpoint
  lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
  coresight: Replace deprecated CPU-hotplug functions.
  Documentation: coresight: Add documentation for CoreSight config
  coresight: syscfg: Add initial configfs support
  coresight: config: Add preloaded configurations
  coresight: etm4x: Add complex configuration handlers to etmv4
  coresight: etm-perf: Update to activate selected configuration
  ...

Author: torvalds

Documentation/ABI/testing/sysfs-driver-ge-achc

@@ -0,0 +1,15 @@
+What:		/sys/bus/spi/<dev>/update_firmware
+Date:		Jul 2021
+Contact:	[email protected]
+Description:	Write 1 to this file to update the ACHC microcontroller
+		firmware via the EzPort interface. For this the kernel
+		will load "achc.bin" via the firmware API (so usually
+		from /lib/firmware). The write will block until the FW
+		has either been flashed successfully or an error occured.
+
+What:		/sys/bus/spi/<dev>/reset
+Date:		Jul 2021
+Contact:	[email protected]
+Description:	This file represents the microcontroller's reset line.
+                1 means the reset line is asserted, 0 means it's not
+		asserted. The file is read and writable.

Documentation/admin-guide/binderfs.rst

@@ -72,3 +72,16 @@ that the `rm() <rm_>`_ tool can be used to delete them. Note that the
 ``binder-control`` device cannot be deleted since this would make the binderfs
 instance unusable.  The ``binder-control`` device will be deleted when the
 binderfs instance is unmounted and all references to it have been dropped.
+
+Binder features
+---------------
+
+Assuming an instance of binderfs has been mounted at ``/dev/binderfs``, the
+features supported by the binder driver can be located under
+``/dev/binderfs/features/``. The presence of individual files can be tested
+to determine whether a particular feature is supported by the driver.
+
+Example::
+
+        cat /dev/binderfs/features/oneway_spam_detection
+        1

Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt

@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/xilinx/xlnx,zynqmp-firmware.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx firmware driver
+
+maintainers:
+  - Nava kishore Manne <[email protected]>
+
+description: The zynqmp-firmware node describes the interface to platform
+  firmware. ZynqMP has an interface to communicate with secure firmware.
+  Firmware driver provides an interface to firmware APIs. Interface APIs
+  can be used by any driver to communicate to PMUFW(Platform Management Unit).
+  These requests include clock management, pin control, device control,
+  power management service, FPGA service and other platform management
+  services.
+
+properties:
+  compatible:
+    oneOf:
+      - description: For implementations complying for Zynq Ultrascale+ MPSoC.
+        const: xlnx,zynqmp-firmware
+
+      - description: For implementations complying for Versal.
+        const: xlnx,versal-firmware
+
+  method:
+    description: |
+                 The method of calling the PM-API firmware layer.
+                 Permitted values are.
+                 - "smc" : SMC #0, following the SMCCC
+                 - "hvc" : HVC #0, following the SMCCC
+
+    $ref: /schemas/types.yaml#/definitions/string-array
+    enum:
+      - smc
+      - hvc
+
+  versal_fpga:
+    $ref: /schemas/fpga/xlnx,versal-fpga.yaml#
+    description: Compatible of the FPGA device.
+    type: object
+
+  zynqmp-aes:
+    $ref: /schemas/crypto/xlnx,zynqmp-aes.yaml#
+    description: The ZynqMP AES-GCM hardened cryptographic accelerator is
+      used to encrypt or decrypt the data with provided key and initialization
+      vector.
+    type: object
+
+  clock-controller:
+    $ref: /schemas/clock/xlnx,versal-clk.yaml#
+    description: The clock controller is a hardware block of Xilinx versal
+      clock tree. It reads required input clock frequencies from the devicetree
+      and acts as clock provider for all clock consumers of PS clocks.list of
+      clock specifiers which are external input clocks to the given clock
+      controller.
+    type: object
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    versal-firmware {
+      compatible = "xlnx,versal-firmware";
+      method = "smc";
+
+      versal_fpga: versal_fpga {
+        compatible = "xlnx,versal-fpga";
+      };
+
+      xlnx_aes: zynqmp-aes {
+        compatible = "xlnx,zynqmp-aes";
+      };
+
+      versal_clk: clock-controller {
+        #clock-cells = <1>;
+        compatible = "xlnx,versal-clk";
+        clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>;
+        clock-names = "ref", "alt_ref", "pl_alt_ref";
+      };
+    };
+
+...

Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml

@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,versal-fpga.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Versal FPGA driver.
+
+maintainers:
+  - Nava kishore Manne <[email protected]>
+
+description: |
+  Device Tree Versal FPGA bindings for the Versal SoC, controlled
+  using firmware interface.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xlnx,versal-fpga
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    versal_fpga: versal_fpga {
+         compatible = "xlnx,versal-fpga";
+    };
+
+...

Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml

@@ -18,6 +18,7 @@ properties:
   compatible:
     enum:
       - qcom,sc7180-osm-l3
+      - qcom,sc8180x-osm-l3
       - qcom,sdm845-osm-l3
       - qcom,sm8150-osm-l3
       - qcom,sm8250-epss-l3

Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml

@@ -49,6 +49,17 @@ properties:
       - qcom,sc7280-mmss-noc
       - qcom,sc7280-nsp-noc
       - qcom,sc7280-system-noc
+      - qcom,sc8180x-aggre1-noc
+      - qcom,sc8180x-aggre2-noc
+      - qcom,sc8180x-camnoc-virt
+      - qcom,sc8180x-compute-noc
+      - qcom,sc8180x-config-noc
+      - qcom,sc8180x-dc-noc
+      - qcom,sc8180x-gem-noc
+      - qcom,sc8180x-ipa-virt
+      - qcom,sc8180x-mc-virt
+      - qcom,sc8180x-mmss-noc
+      - qcom,sc8180x-system-noc
       - qcom,sdm845-aggre1-noc
       - qcom,sdm845-aggre2-noc
       - qcom,sdm845-config-noc

Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml

@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+# Copyright (C) 2021 GE Inc.
+# Copyright (C) 2021 Collabora Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/ge-achc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GE Healthcare USB Management Controller
+
+description: |
+  A device which handles data acquisition from compatible USB based peripherals.
+  SPI is used for device management.
+
+  Note: This device does not expose the peripherals as USB devices.
+
+maintainers:
+  - Sebastian Reichel <[email protected]>
+
+properties:
+  compatible:
+    items:
+      - const: ge,achc
+      - const: nxp,kinetis-k20
+
+  clocks:
+    maxItems: 1
+
+  vdd-supply:
+    description: Digital power supply regulator on VDD pin
+
+  vdda-supply:
+    description: Analog power supply regulator on VDDA pin
+
+  reg:
+    items:
+      - description: Control interface
+      - description: Firmware programming interface
+
+  reset-gpios:
+    description: GPIO used for hardware reset.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        spi@1 {
+            compatible = "ge,achc", "nxp,kinetis-k20";
+            reg = <1>, <0>;
+            clocks = <&achc_24M>;
+            reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+        };
+    };

Documentation/devicetree/bindings/misc/ge-achc.txt

@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/nintendo-otp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nintendo Wii and Wii U OTP Device Tree Bindings
+
+description: |
+  This binding represents the OTP memory as found on a Nintendo Wii or Wii U,
+  which contains common and per-console keys, signatures and related data
+  required to access peripherals.
+
+  See https://wiiubrew.org/wiki/Hardware/OTP
+
+maintainers:
+  - Emmanuel Gil Peyrot <[email protected]>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - nintendo,hollywood-otp
+      - nintendo,latte-otp
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    otp@d8001ec {
+        compatible = "nintendo,latte-otp";
+        reg = <0x0d8001ec 0x8>;
+    };
+
+...