Merge branches 'clk-qcom', 'clk-versatile', 'clk-renesas', 'clk-sifive' and 'clk-ti' into clk-next

 - duty cycle setting support on qcom clks
 - qcom MDM9607 GCC
 - qcom sc8180x display clks
 - qcom SM6125 GCC
 - Add TI am33xx spread spectrum clock support

* clk-qcom: (22 commits)
  clk: qcom: clk-alpha-pll: fix CAL_L write in alpha_pll_fabia_prepare
  clk: qcom: Add camera clock controller driver for SM8250
  dt-bindings: clock: add QCOM SM8250 camera clock bindings
  clk: qcom: clk-alpha-pll: add support for zonda pll
  clk/qcom: Remove unused variables
  clk: qcom: smd-rpmcc: Add support for MSM8226 rpm clocks
  clk: qcom: gcc: Add support for Global Clock controller found on MSM8226
  dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings
  clk: qcom: Add SM6125 (TRINKET) GCC driver
  dt-bindings: clk: qcom: gcc-sm6125: Document SM6125 GCC driver
  clk: qcom: gcc: Add support for a new frequency for SC7280
  clk: qcom: smd-rpm: Fix wrongly assigned RPM_SMD_PNOC_CLK
  dt-bindings: clock: qcom: rpmcc: Document MSM8226 compatible
  clk: qcom: dispcc-sm8250: Add EDP clocks
  clk: qcom: dispcc-sm8250: Add sc8180x support
  clk: qcom: smd-rpm: De-duplicate identical entries
  clk: qcom: smd-rpm: Switch to parent_data
  clk: qcom: Add MDM9607 GCC driver
  dt-bindings: clock: Add MDM9607 GCC clock bindings
  clk: qcom: cleanup some dev_err_probe() calls
  ...

* clk-versatile:
  clk: versatile: Depend on HAS_IOMEM
  clk: versatile: remove dependency on ARCH_*

* clk-renesas: (22 commits)
  clk: renesas: Add support for R9A07G044 SoC
  clk: renesas: Add CPG core wrapper for RZ/G2L SoC
  dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver
  dt-bindings: clock: Add r9a07g044 CPG Clock Definitions
  clk: renesas: r8a77995: Add ZA2 clock
  clk: renesas: cpg-mssr: Make srstclr[] comment block consistent
  clk: renesas: cpg-mssr: Remove unused [RM]MSTPCR() definitions
  clk: renesas: r9a06g032: Switch to .determine_rate()
  clk: renesas: div6: Implement range checking
  clk: renesas: div6: Consider all parents for requested rate
  clk: renesas: div6: Switch to .determine_rate()
  clk: renesas: div6: Simplify src mask handling
  clk: renesas: div6: Use clamp() instead of clamp_t()
  clk: renesas: rcar-usb2-clock-sel: Fix error handling in .probe()
  clk: renesas: r8a779a0: Add ISPCS clocks
  clk: renesas: rcar-gen3: Add boost support to Z clocks
  clk: renesas: rcar-gen3: Add custom clock for PLLs
  clk: renesas: rcar-gen3: Increase Z clock accuracy
  clk: renesas: rcar-gen3: Grammar s/dependent of/dependent on/
  clk: renesas: rcar-gen3: Remove superfluous masking in cpg_z_clk_set_rate()
  ...

* clk-sifive:
  clk: analogbits: fix doc warning in wrpll-cln28hpc.c
  clk: sifive: Fix kernel-doc

* clk-ti:
  drivers: ti: remove redundant error message in adpll.c
  clk: keystone: syscon-clk: Add support for AM64 specific epwm-tbclk
  dt-bindings: clock: ehrpwm: Add support for AM64 specific compatible
  clk: ti: add am33xx/am43xx spread spectrum clock support
  ARM: dts: am43xx-clocks: add spread spectrum support
  ARM: dts: am33xx-clocks: add spread spectrum support
  dt-bindings: ti: dpll: add spread spectrum support
  clk: ti: fix typo in routine description

Author: bebarino

Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml

@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas RZ/G2L Clock Pulse Generator / Module Standby Mode
+
+maintainers:
+  - Geert Uytterhoeven <[email protected]>
+
+description: |
+  On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and Module
+  Standby Mode share the same register block.
+
+  They provide the following functionalities:
+    - The CPG block generates various core clocks,
+    - The Module Standby Mode block provides two functions:
+        1. Module Standby, providing a Clock Domain to control the clock supply
+           to individual SoC devices,
+        2. Reset Control, to perform a software reset of individual SoC devices.
+
+properties:
+  compatible:
+    const: renesas,r9a07g044-cpg  # RZ/G2{L,LC}
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      Clock source to CPG can be either from external clock input (EXCLK) or
+      crystal oscillator (XIN/XOUT).
+    const: extal
+
+  '#clock-cells':
+    description: |
+      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+        and a core clock reference, as defined in
+        <dt-bindings/clock/r9a07g044-cpg.h>
+      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+        a module number, as defined in the <dt-bindings/clock/r9a07g044-cpg.h>.
+    const: 2
+
+  '#power-domain-cells':
+    description:
+      SoC devices that are part of the CPG/Module Standby Mode Clock Domain and
+      can be power-managed through Module Standby should refer to the CPG device
+      node in their "power-domains" property, as documented by the generic PM
+      Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
+    const: 0
+
+  '#reset-cells':
+    description:
+      The single reset specifier cell must be the module number, as defined in
+      the <dt-bindings/clock/r9a07g044-cpg.h>.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    cpg: clock-controller@11010000 {
+            compatible = "renesas,r9a07g044-cpg";
+            reg = <0x11010000 0x10000>;
+            clocks = <&extal_clk>;
+            clock-names = "extal";
+            #clock-cells = <2>;
+            #power-domain-cells = <0>;
+            #reset-cells = <1>;
+    };

Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml

@@ -12,7 +12,9 @@ maintainers:
 properties:
   compatible:
     items:
-      - const: ti,am654-ehrpwm-tbclk
+      - enum:
+          - ti,am654-ehrpwm-tbclk
+          - ti,am64-epwm-tbclk
       - const: syscon
 
   "#clock-cells":

Documentation/devicetree/bindings/clock/ti/dpll.txt

@@ -42,6 +42,11 @@ Required properties:
 	"idlest" - contains the idle status register base address
 	"mult-div1" - contains the multiplier / divider register base address
 	"autoidle" - contains the autoidle register base address (optional)
+	"ssc-deltam" - DPLL supports spread spectrum clocking (SSC), contains
+		       the frequency spreading register base address (optional)
+	"ssc-modfreq" - DPLL supports spread spectrum clocking (SSC), contains
+		        the modulation frequency register base address
+			(optional)
   ti,am3-* dpll types do not have autoidle register
   ti,omap2-* dpll type does not support idlest / autoidle registers
 
@@ -51,6 +56,14 @@ Optional properties:
 	- ti,low-power-stop : DPLL supports low power stop mode, gating output
 	- ti,low-power-bypass : DPLL output matches rate of parent bypass clock
 	- ti,lock : DPLL locks in programmed rate
+	- ti,min-div : the minimum divisor to start from to round the DPLL
+		       target rate
+	- ti,ssc-deltam : DPLL supports spread spectrum clocking, frequency
+			  spreading in permille (10th of a percent)
+	- ti,ssc-modfreq-hz : DPLL supports spread spectrum clocking, spread
+			      spectrum modulation frequency
+	- ti,ssc-downspread : DPLL supports spread spectrum clocking, boolean
+			      to enable the downspread feature
 
 Examples:
 	dpll_core_ck: dpll_core_ck@44e00490 {
@@ -83,3 +96,10 @@ Examples:
 		clocks = <&sys_ck>, <&sys_ck>;
 		reg = <0x0500>, <0x0540>;
 	};
+
+	dpll_disp_ck: dpll_disp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>;
+	};

arch/arm/boot/dts/am33xx-clocks.dtsi

@@ -164,7 +164,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-core-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0490>, <0x045c>, <0x0468>;
+		reg = <0x0490>, <0x045c>, <0x0468>, <0x0460>, <0x0464>;
 	};
 
 	dpll_core_x2_ck: dpll_core_x2_ck {
@@ -204,7 +204,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0488>, <0x0420>, <0x042c>;
+		reg = <0x0488>, <0x0420>, <0x042c>, <0x0424>, <0x0428>;
 	};
 
 	dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 {
@@ -220,7 +220,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-no-gate-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0494>, <0x0434>, <0x0440>;
+		reg = <0x0494>, <0x0434>, <0x0440>, <0x0438>, <0x043c>;
 	};
 
 	dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 {
@@ -244,7 +244,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-no-gate-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0498>, <0x0448>, <0x0454>;
+		reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>;
 	};
 
 	dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 {
@@ -261,7 +261,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-no-gate-j-type-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x048c>, <0x0470>, <0x049c>;
+		reg = <0x048c>, <0x0470>, <0x049c>, <0x0474>, <0x0478>;
 	};
 
 	dpll_per_m2_ck: dpll_per_m2_ck@4ac {

arch/arm/boot/dts/am43xx-clocks.dtsi

@@ -204,7 +204,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-core-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
+		reg = <0x2d20>, <0x2d24>, <0x2d2c>, <0x2d48>, <0x2d4c>;
 	};
 
 	dpll_core_x2_ck: dpll_core_x2_ck {
@@ -250,7 +250,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
+		reg = <0x2d60>, <0x2d64>, <0x2d6c>, <0x2d88>, <0x2d8c>;
 	};
 
 	dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 {
@@ -276,7 +276,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2da0>, <0x2da4>, <0x2dac>;
+		reg = <0x2da0>, <0x2da4>, <0x2dac>, <0x2dc8>, <0x2dcc>;
 	};
 
 	dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 {
@@ -294,7 +294,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
+		reg = <0x2e20>, <0x2e24>, <0x2e2c>, <0x2e48>, <0x2e4c>;
 	};
 
 	dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 {
@@ -313,7 +313,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-j-type-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2de0>, <0x2de4>, <0x2dec>;
+		reg = <0x2de0>, <0x2de4>, <0x2dec>, <0x2e08>, <0x2e0c>;
 	};
 
 	dpll_per_m2_ck: dpll_per_m2_ck@2df0 {
@@ -557,7 +557,7 @@
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
+		reg = <0x2e60>, <0x2e64>, <0x2e6c>, <0x2e88>, <0x2e8c>;
 	};
 
 	dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 {

drivers/clk/analogbits/wrpll-cln28hpc.c

@@ -198,7 +198,7 @@ static int __wrpll_update_parent_rate(struct wrpll_cfg *c,
 }
 
 /**
- * wrpll_configure() - compute PLL configuration for a target rate
+ * wrpll_configure_for_rate() - compute PLL configuration for a target rate
  * @c: ptr to a struct wrpll_cfg record to write into
  * @target_rate: target PLL output clock rate (post-Q-divider)
  * @parent_rate: PLL input refclk rate (pre-R-divider)

drivers/clk/keystone/syscon-clk.c

@@ -149,11 +149,28 @@ static const struct ti_syscon_gate_clk_data am654_clk_data[] = {
 	{ /* Sentinel */ },
 };
 
+static const struct ti_syscon_gate_clk_data am64_clk_data[] = {
+	TI_SYSCON_CLK_GATE("epwm_tbclk0", 0x0, 0),
+	TI_SYSCON_CLK_GATE("epwm_tbclk1", 0x0, 1),
+	TI_SYSCON_CLK_GATE("epwm_tbclk2", 0x0, 2),
+	TI_SYSCON_CLK_GATE("epwm_tbclk3", 0x0, 3),
+	TI_SYSCON_CLK_GATE("epwm_tbclk4", 0x0, 4),
+	TI_SYSCON_CLK_GATE("epwm_tbclk5", 0x0, 5),
+	TI_SYSCON_CLK_GATE("epwm_tbclk6", 0x0, 6),
+	TI_SYSCON_CLK_GATE("epwm_tbclk7", 0x0, 7),
+	TI_SYSCON_CLK_GATE("epwm_tbclk8", 0x0, 8),
+	{ /* Sentinel */ },
+};
+
 static const struct of_device_id ti_syscon_gate_clk_ids[] = {
 	{
 		.compatible = "ti,am654-ehrpwm-tbclk",
 		.data = &am654_clk_data,
 	},
+	{
+		.compatible = "ti,am64-epwm-tbclk",
+		.data = &am64_clk_data,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ti_syscon_gate_clk_ids);

drivers/clk/renesas/Kconfig

@@ -32,6 +32,7 @@ config CLK_RENESAS
 	select CLK_R8A77995 if ARCH_R8A77995
 	select CLK_R8A779A0 if ARCH_R8A779A0
 	select CLK_R9A06G032 if ARCH_R9A06G032
+	select CLK_R9A07G044 if ARCH_R9A07G044
 	select CLK_SH73A0 if ARCH_SH73A0
 
 if CLK_RENESAS
@@ -156,6 +157,10 @@ config CLK_R9A06G032
 	help
 	  This is a driver for R9A06G032 clocks
 
+config CLK_R9A07G044
+	bool "RZ/G2L clock support" if COMPILE_TEST
+	select CLK_RZG2L
+
 config CLK_SH73A0
 	bool "SH-Mobile AG5 clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
@@ -182,6 +187,10 @@ config CLK_RCAR_USB2_CLOCK_SEL
 	help
 	  This is a driver for R-Car USB2 clock selector
 
+config CLK_RZG2L
+	bool "Renesas RZ/G2L family clock support" if COMPILE_TEST
+	select RESET_CONTROLLER
+
 # Generic
 config CLK_RENESAS_CPG_MSSR
 	bool "CPG/MSSR clock support" if COMPILE_TEST

drivers/clk/renesas/Makefile

@@ -29,13 +29,15 @@ obj-$(CONFIG_CLK_R8A77990)		+= r8a77990-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A77995)		+= r8a77995-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A779A0)		+= r8a779a0-cpg-mssr.o
 obj-$(CONFIG_CLK_R9A06G032)		+= r9a06g032-clocks.o
+obj-$(CONFIG_CLK_R9A07G044)		+= r9a07g044-cpg.o
 obj-$(CONFIG_CLK_SH73A0)		+= clk-sh73a0.o
 
 # Family
 obj-$(CONFIG_CLK_RCAR_CPG_LIB)		+= rcar-cpg-lib.o
 obj-$(CONFIG_CLK_RCAR_GEN2_CPG)		+= rcar-gen2-cpg.o
 obj-$(CONFIG_CLK_RCAR_GEN3_CPG)		+= rcar-gen3-cpg.o
 obj-$(CONFIG_CLK_RCAR_USB2_CLOCK_SEL)	+= rcar-usb2-clock-sel.o
+obj-$(CONFIG_CLK_RZG2L)			+= renesas-rzg2l-cpg.o
 
 # Generic
 obj-$(CONFIG_CLK_RENESAS_CPG_MSSR)	+= renesas-cpg-mssr.o