rtsp works for some minutes then closes

[kallquk]

Hello

I have zgemma h7 and am facing this issue: I pick a channel, not matter if it is s2, t2 or c, for example a fta one: rtsp://192.168.4.37:554/?fe=1&src=1&freq=11766&pol=v&sr=29900&fec=34&ro=0.35&msys=dvbs2&mtype=8psk&plts=on&pids=0,16,17,18,1101,501,601,631,611,567. It is opened for some minutes from vlc in another pc then closes (not matter the pc, I tried 3 of them, not matters windows or linux). Zgemma and PC are not in the same subnet, but anyway are within lan network(respectively 192.168.4.37 and 192.168.8.24)

I did a build environment for zgemma h7 (arm), so I am building the latest satpi from github. Unfortunately I do not know how to setup syslog(ip and port) from web config of satpi, I am put here the log found in web page.

It seems not having the issue in http stream, only in rtsp, I 'll try connecting directly pc and stb try again.

satpi.log

[Barracuda09]

At some point the PC is unreachable see

Mon Oct 20 20:51:05.1874 2025 <CRLF>
Mon Oct 20 20:51:52.0507 2025 [                    src/socket/SocketAttr.cpp:215] sendto (fd: 17): Network is unreachable (code 101)
Mon Oct 20 20:51:52.0509 2025 [         src/output/StreamClientOutputRtp.cpp:155] Frontend: 1, Error sending RTP/UDP data to 192.168.8.24:9034
Mon Oct 20 20:51:52.0512 2025 [                    src/socket/SocketAttr.cpp:215] sendto (fd: 17): Network is unreachable

rtsp uses UDP so probably the route to the other sub-net is broken.

[kallquk]

Hi,

thank you for the help
please let me congratulate you for this great software you share with us

I exclude to be a network problem, both devices are connected to same router (mikrotik 2011), both can access each other uninterruptedly, anyway it begins working, in this moment it can reach client some minutes later not why?
I connect stb direct to PC with vlc and works without interruptions. May be this problem persists in routing mode for udp only. As I wrote above there are no problems with http protocol.

how can set ip and port for the syslog server ?

thanks in advance

[Barracuda09]

how can set ip and port for the syslog server ?

You can not let SatPI send directly to a syslog server. You can only send it to local syslog.