Touch screen stop working with SD.h library

[tonxy1999]

Hello,

I'm using ILI9341 display and ESP32 to build some simple Weather station project. Board is Wemos D1 R32 and display is some from Aliexpress.

I want to store data to microSD card to have some analytics, but the problem comes with SD.h library. If I initialize SD library firstly, then tft library, nothing shows on the screen. If I do it in the opposite way, first do initialization of tft and then SD, display is working good, but touchscreen is not working. In both times I can access to data on microSD card.

I set up tft_eSPI pins in User_data file.

SD card is connected to the VSPI
MOSI 23
MISO 19
CLK 18
CS 5

and the display is connected to the HSPI

MOSI 13
MISO 12
CLK 14
CS 15
TOUCH_CS 27

here is my code:

#include "SPI.h"
#include "FS.h"
#include "SD.h"
#include <stdint.h>
#include <Wire.h>               // I2C
#include <AHTxx.h>              // temperature sensor
#include <DS3231.h>             // RTC modul
#include <DFRobot_ENS160.h>     // eCO2 sensor
#include <Arduino_GFX_Library.h>
#include <TFT_eSPI.h> //This is our lcd library
TFT_eSPI tft = TFT_eSPI();

//display initialization
#define rotation 1

// This is calibration data for the raw touch data to the screen coordinates
#define TS_MINX 150
#define TS_MINY 120
#define TS_MAXX 920
#define TS_MAXY 940
#define MINPRESSURE 50
#define MAXPRESSURE 1000

//temp and CO2 sensor initialization
AHTxx aht20(AHTXX_ADDRESS_X38, AHT2x_SENSOR); 
DFRobot_ENS160_I2C ENS160(&Wire, /*I2CAddr*/ 0x53);

DS3231 myRTC;
bool century = false;
bool h12Flag;
bool pmFlag;

File myFile;


void setup() {

  Serial.begin(115200);
  Wire.begin();
  tft.begin();
  uint16_t calData[5] = { 344, 3577, 245, 3563, 7 };
  tft.setTouch(calData);
  frontScreen();
  if(!SD.begin()){
  Serial.println("Card Mount Failed");
  
  return;
  }
  if (!SD.exists("/temperature.txt")) {
    Serial.println(F("temperature.txt doesn't exist. Creating temperature.txt file..."));
      // create a new file by opening a new file and immediately close it
    writeFile("/temperature.txt", 1);
  }
  if (SD.exists("/temperature.txt"))
    Serial.println(F("temperature.txt exists on SD Card."));
  else
    Serial.println(F("temperature.txt doesn't exist on SD Card."));

  if (!SD.exists("/CO2.txt")) {
    Serial.println(F("CO2.txt doesn't exist. Creating CO2.txt file..."));
      // create a new file by opening a new file and immediately close it
    writeFile("/CO2.txt", 1);
  }
  if (SD.exists("/CO2.txt"))
    Serial.println(F("CO2.txt exists on SD Card."));
  else
    Serial.println(F("CO2.txt doesn't exist on SD Card."));
  
  if (!SD.exists("/Humidity.txt")) {
    Serial.println(F("Humidity.txt doesn't exist. Creating Humidity.txt file..."));
      // create a new file by opening a new file and immediately close it
    writeFile("/Humidity.txt", 1);
  }
  if (SD.exists("/Humidity.txt")){
    Serial.println(F("Humidity.txt exists on SD Card."));}
  else{
    Serial.println(F("Humidity.txt doesn't exist on SD Card."));}

  Serial.println("ILI9341 Test!"); 
  
  while (aht20.begin() != true)
  {
    Serial.println(F("AHT2x not connected or fail to load calibration coefficient")); //(F()) save string to flash & keeps dynamic memory free

    delay(5000);
  }
  Serial.println(F("AHT20 OK"));
  while( NO_ERR != ENS160.begin() ){
    Serial.println("Communication with device failed, please check connection");
    delay(3000);
  }
  Serial.println("ENS160 OK");
  ENS160.setPWRMode(ENS160_STANDARD_MODE);
      
}

I also tried to add this but it didn't help

SPIClass spiSD(VSPI);
SPIClass spiTFT(HSPI);

spiSD.begin(18,19,23,5);
spiTFT.begin(14,12,13,15);

Has anyone idea what is going wrong? I found something for Arduino, but I don't know is the same problem here.