Waveshare Watch esp32-s3-amoled-2.06

[SwollenOctopus]

Is your feature request related to a problem? Please describe.
I have no display output on this watch using flasher firmware for lilygo twatch.

Describe the solution you'd like
If possible, could we get a firmware release specifically for the Waveshare Watch Esp32-s2-amoled-2.06?
As far as I know, from the very little I can see on the serial monitor after the firmware flash, I see the console output however there is no power to the screen nor is there support for the 2 right side buttons (PWR, BOOT).

I do know that this is an underused alternative, however, I do see multiple users here asking questions about this firmware request.

[SwollenOctopus]

This is the Wiki site which shows code demos for the watch specifically.
(https://www.waveshare.com/wiki/ESP32-S3-Touch-AMOLED-2.06)

[SwollenOctopus]

Here is the repository for the Watch which also has the files for the LVGL screen pin and defines
https://github.com/waveshareteam/ESP32-display-support/tree/master/AMOLED-Products/ESP32-S3-Touch-AMOLED-2.06

[bmorcelli]

There's already an issue specific for this device. So this is duplicated..

Tft_eSPI doesn't handle QSPI displays.. so naturally it is not compatible with Bruce atm...

If you get it to work with LovyanGFX, send the config you used

[SwollenOctopus]

If I'm not mistaken this uses Lvgl

https://github.com/lvgl/lvgl

In the sample I first linked is folder containing the correct libraries for this watches displays. It's not the same.....

Nvm I stand corrected.