Merge branch 'main' into EEZ_UI

Author: Builty

HardwarePlatform_Waveshare3.5B.md

@@ -16,6 +16,10 @@ https://www.waveshare.com/product/esp32-s3-touch-lcd-3.5b.htm?sku=31334
 <br>
 <img width="657" height="445" alt="image" src="https://github.com/user-attachments/assets/2c875e18-cdaa-4ca8-b7e3-bf95c980b89c" />
 <br><br>
+**Important note:** Waveshare have two very similar boards:
+- ESP32-S3-3.5: This board is **NOT COMPATIBLE** 
+- ESP32-S3-3.5**B**: This is the supported version
+<br>
 This module provides the microcontroller, power input suitable for 5v DC pedal board use, and LCD screen with capacitive touch.
 
 ## Connections <a name="connections"></a>

HardwarePlatform_Waveshare4.3B.md

@@ -26,7 +26,8 @@ This module provides the microcontroller, power input suitable for 9v DC pedal b
 Note: the controller code relies on the Tonex One pedal being set to Stomp mode. Code is in place to do this automatically.
 - Connect the USB-C port on the Waveshare board to the ToneX One USB-C port
 - Optional: connect dual footswitches to the isolated inputs on the Waveshare board. GND to ground. DI0 for footswitch 1. DI1 for footwitch 2. Exact wiring depends on the footswitch but is usually a 6.5mm stereo jack
-- Connect 9V DC power supply to the terminals on the Waveshare board. The terminals are screw terminals, so most likely a DC jack to wires will be needed.
+- Connect 9V DC 1 amp (minimum) power supply to the terminals on the Waveshare board. The terminals are screw terminals, so most likely a DC jack to wires will be needed.
+- Note: some users have had issues due to the quality of the power supply. If it is insufficient current, or electrically noisy, it may cause the board to crash/reset/flicker. A good quality power supply is recommended
 - Switch on the power supply
 - The Waveshare board USB port will power the Tonex One
 - Optional: for the Bluetooth Client version of code, switch on a M-Vave Chocolate Midi pedal (https://www.cuvave.com/productinfo/724103.html). After a few seconds it should connect and the Bluetooth icon should change from gray to blue

MidiCommands.md

@@ -118,4 +118,5 @@ This project uses a low-cost embedded controller (Espressif ESP32-S3) to form a
 | Global Tuning Reference | 119 | 0-127 |
 | Load Preset to Slot A | 120 | 0-19 |
 | Load Preset to Slot B | 121 | 0-19 |
+| Global Volume | 122 | 0-127 |
 | Select Preset | 127 | 0-19 |

README.md

@@ -142,6 +142,12 @@ For more information about the firmware development and customisation, refer to
 - https://github.com/vit3k/tonex_controller for great work on reverse engineering the Tonex One USB protocol
 
 ## Firmware Release Notes <a name="release_notes"></a>
+V2.0.1.2
+- Minor bug fix release. No features
+- Fixed issues with wired Midi on Waveshare 4.3B
+- Fixed issue with Internal/External footwitch FX config, where the "Set Preset" option didn't toggle between the two selected presets. Only preset 1 was set active.
+
+
 V2.0.0.2
 - Caution: due to structural changes, amp/pedal skins and user preset text is not maintained and will need to be entered again. And if rolling back to an older version, all config will be lost
 - Upgraded to ESP-IDF 5.5.1