Space behind the V2 bed is often used for brush mods and purge buckets. I also like to be able to remove the heatbed without flipping the printer to access the connectors.
This mod combines 3 features:
- 2 rows of 6 mounts for Wago 221-412
- purge bucket
- nozzle brush
| Item | Quantity | Unit | Description |
|---|---|---|---|
| M3 Roll-in T-Nuts | 4 | pcs | T-slot nuts for aluminum extrusion |
| M3x8mm Socket Head Cap Screws | 4 | pcs | Hex socket head cap screws |
| Neodymium Magnets 6x3mm | 16 | pcs | Strong neodymium disc magnets |
Installation:
- T-nuts should be placed into horizontal extrusions on top of which the bed is resting
- 2 t-nuts on each inner side of the extrusion, facing one another
- Base is placed between horizontal extrusions and tightened with 4 M3x8 SHCS bolts
- All magnets need to be placed in their respective slots. Drop of superglue will help holding them in place long-term