novacustom/recovery: flash fd first

Edit recovery manual for novacustom to flash the FD region first. The
reason is, all regions are FD dependent and we need to ensure it gets
flashed first.

Signed-off-by: Mateusz Kusiak <[email protected]>

Author: 3mkusiak

docs/unified/novacustom/recovery.md

@@ -517,13 +517,18 @@ firmware.
                 ![](../../images/560TNEwson1.webp)
                 ![](../../images/560TNEwson2.webp)
 
-        20. Hold down the WSON probe firmly in place and execute the following command
-            on your host computer:
+        20. Hold down the WSON probe firmly in place and execute the following
+            commands on your host computer:
 
             ```bash
-            sudo flashrom -p ch341a_spi --ifd -i fd -i me -i bios -w [backup.bin]
+            sudo flashrom -p ch341a_spi --ifd -i fd -w [backup.bin] && \
+            sudo flashrom -p ch341a_spi --ifd -i me -i bios -w [backup.bin]
             ```
 
+            _Note: The commands will first flash FD region, followed by ME and
+            BIOS regions. The reason is all regions are FD dependent, therefore,
+            it must be ensured the FD gets flashed first._
+
         21. Power on the laptop to verify the recovery passed. First boot may take a
             while, so be patient.