boards: m5stack: cores3: Add FT6336 configuration

Adding FT6336 touchpanel controller configuration.

Signed-off-by: TOKITA Hiroshi <[email protected]>

Author: soburi

boards/m5stack/m5stack_cores3/Kconfig.defconfig

@@ -0,0 +1,14 @@
+# M5Stack CoreS3 board defconfig
+
+# Copyright (c) 2024 TOKITA Hiroshi
+# SPDX-License-Identifier: Apache-2.0
+
+if BOARD_M5STACK_CORES3_ESP32S3_PROCPU || BOARD_M5STACK_CORES3_ESP32S3_PROCPU_SE
+
+config INPUT_FT5336_INTERRUPT
+	default y if INPUT
+
+config INPUT
+	default y
+
+endif # BOARD_M5STACK_CORES3_ESP32S3_PROCPU || BOARD_M5STACK_CORES3_ESP32S3_PROCPU_SE

boards/m5stack/m5stack_cores3/m5stack_cores3_procpu_common.dtsi

@@ -19,6 +19,7 @@
 		zephyr,code-partition = &slot0_partition;
 		zephyr,rtc = &bm8563_rtc;
 		zephyr,bt-hci = &esp32_bt_hci;
+		zephyr,touch = &ft6336_touch;
 	};
 
 	aliases {
@@ -31,6 +32,11 @@
 		rtc = &bm8563_rtc;
 		sdhc0 = &sd0;
 	};
+
+	lvgl_pointer {
+		compatible = "zephyr,lvgl-pointer-input";
+		input = <&ft6336_touch>;
+	};
 };
 
 &usb_serial {
@@ -91,6 +97,14 @@
 			int-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	ft6336_touch: ft5336@38 {
+		status = "okay";
+		compatible = "focaltech,ft5336";
+		reg = <0x38>;
+		int-gpios = <&aw9523b_gpio 10 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&aw9523b_gpio 0 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &i2c1 {