Changelog DWC 3.x RC

Version 3.4.2-rc1

Compatible versions:

• DuetSoftwareFramework 3.4.2-rc1
• RepRapFirmware 3.4.2-rc1

New features:

• Added support for VSCode and for i18n-ally extension
• If rr_gcode returns a non-zero err value, the code is no longer awaited and a warning is printed (standalone mode)

Bug fixes:

• Copy button on object model browser was no longer aligned
• Code input could exceed the maximum allowed buffer size in standalone mode (255 chars)
• Files with apostrophes in the filename were not correctly invoked
• Delete menu item showed up twice on the Filaments page
• Help links pointed to outdated documentation
• G-code viewer did not display temps correctly if the tool list contained gaps
• Fixed tool inputs for Chrome on Android
• Disabled translation prompt that showed up in Chrome browsers

Version 3.4.1-rc2

Compatible versions:

• DuetSoftwareFramework 3.4.1-rc2
• RepRapFirmware 3.4.1-rc2

Changed behaviour:

• Code editor with syntax highlighting is disabled on iOS devices to avoid input problems

Bug fixes:

• Job progress did not use extruder totals if applicable
• Unnecessary HTTP header key was passed to JSON requests
• Rotary delta configurations set a wrong kinematics type in the object model

Version 3.4.1-rc1

Compatible versions:

• DuetSoftwareFramework 3.4.1-rc1
• RepRapFirmware 3.4.1-rc1

New features:

• Added support for custom precision (up to 0.001mm) and for displaying the coordinates in inch (thanks @MZachmann)
• Updated French translations (thanks @Erinell)

Bug fixes:

• Some chart colours were incorrect in dark mode
• Certain enum values were missing from the object model
• Restoring the move steps for additional axes was not working

Version 3.4-rc2

Compatible versions:

• DuetSoftwareFramework 3.4-rc2
• RepRapFirmware 3.4-rc2

New features:

• Added support for JPEG thumbnails

Changed behaviour:

• Minor changes to the look of the main menu in desktop mode
• Invalid JSON from RRF is always logged to the console
• Thumbnail data is explicitly checked after receipt in standalone mode

Bug fixes:

• In SBC mode, /machine/connect was not repeatedly called on reconnect
• Webcam stream was not actively interrupted when the page was deactivated
• File edit dialog could throw an exception under certain circumstances
• During updates/resets boards[0] was not fully available but a property was accessed

Version 3.4-rc1

Compatible versions:

• DuetSoftwareFramework 3.4-rc1
• RepRapFirmware 3.4-rc1

New features:

• Added support for thumbnails for both SBC and standalone mode
• Sensor temperatures are now displayed per layer in the tooltip of the layer chart (if available)
• Replaced old notification system with a new one preventing potential overlap of the E-STOP button
• Small icon menu can be enabled on demand in the settings
• Added back options to allow users to specify which tool change macros are supposed to be executed
• Users can choose if the current or file timestamp should be used for file uploads
• Sliders can be replaced with numeric inputs on demand

Changed behaviour:

• Resume button is no longer enabled while a print is being paused
• Removed auto-sleep button. Invoke M1 or a custom macro in your end G-code if you
• Default delay before settings/cache elements are saved is greatly reduced
• Homing buttons are enabled unless the corresponding axes are homed or movement without homing is permitted (see M564)
• Webcam content is disabled when the webcam page is hidden
• Filaments menu item is only visible in FFF mode
• DWC can connect to http://localhost (alternative to http://[hostname])
• Made "Install Updates" button visible in SBC mode for non-Duet boards
• Made bottom navigation bar optional and changed navigation menu again for smartphones
• Tool state is now modified using M568 instead of G10
• Document title is put into braces when the machine is disconnected
• Syntax highlighting is always enabled unless the OSK plugin is enabled

Bug fixes:

• Non-default system directory was not correctly loaded after connecting
• Connecting dialog was briefly hidden before it was displayed again on reconnects
• Object model patches could delete certain properties that should remain existent
• Upload progress bar remained active for empty files even after the file had been completely uploaded
• When a menu category was collapsed and then expanded again, all the other categories collapsed

Version 3.3-rc3

Compatible versions:

• DuetSoftwareFramework 3.3-rc3
• RepRapFirmware 2 or newer (1.2x may work but untested)

Changed behaviour:

• Job progress indicator now uses job.rawExtrusion instead of move.extruders[].rawPosition if possible
• Changed caption of Third-Party Plugins to Machine-Specific Plugins

Bug fixes:

• Overflow confirmation of Accelerometer plugin did not display translated message
• Fixed selection problem on the Accelerometer page
• Fixed issue where global variables could be hidden on the OM browser after a reconnect
• Reset prompt after expansion board update was shown even if the mainboard was updated
• Layer chart was not immediately cleared when a new print was started
• Cache for simulated files was not properly cleared

Version 3.3-rc2

Compatible versions:

• DuetSoftwareFramework 3.3-rc2
• RepRapFirmware 2 or newer (1.2x may work but untested)

New features:

• .deb packages can be installed if support for package management and root plugins is enabled in DSF

Bug fixes:

• Global variables were not cleared on disconnect
• Added new Disconnected state to indicate when DWC is not connected to RRF

Version 3.3-rc1

Compatible versions:

• DuetSoftwareFramework 3.3-rc1
• RepRapFirmware 2 or newer (1.2x may work but untested)

Changed behaviour:

• DWC does not ask for a firmware reset if the mainboard was updated as well

Bug fixes:

• Arrow icon next to the code input was misleading
• Status panel stopped updating if Z-probes contained gaps in the OM
• Global variables were not properly updated in the DWC object model

Version 3.2-rc2

Compatible versions:

• DuetSoftwareFramework 3.2.0-rc2
• RepRapFirmware 2 or newer (1.2x may work but untested)

Bug fixes:

• New code editor has been disabled on touch devices for now due to incompatibilities
• Extra sensors were labelled as heaters in the temperature chart
• Change callbacks in the tool input component didn't check changed values properly
• Simulation state wasn't recorded correctly in the job estimations panel
• When connected in SBC mode multiple concurrent reconnect attempts could be started
• Fixed G3 in the GCode Viewer

Version 3.2-rc1

Compatible versions:

• DuetSoftwareFramework 3.2.0-rc1
• RepRapFirmware 2 or newer (1.2x may work but untested)

Changed behaviour:

• Added new dialog for up- and downloads of multiple files (similar to DWC1)
• When an expansion board firmware update is performed, DWC asks for controller reset once done
• Integrated new G-Code viewer plugin (thanks Sindarius)

Bug fixes:

• Print control buttons could show wrong captions during (paused) simulations
• Code input could keep previously selected suggestion even if it differs
• Sometimes code promises were not resolved in the correct order in standalone mode
• When M997/M999 were sent from code inputs, file upload errors for DWC files could be seen