Merge RC3.5.0_master-localization into RC3.5.0_master (#16092)

Author: cBuild

doc/distrib/NodeHelpFiles/cs-CZ/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
 ## Podrobnosti
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+Uzel `TSplineTopology.InnerVertices` vrací vrcholy v rámci dané topologie. V příkladu níže je vytvořen povrch TSpline a potom jsou vnitřní vrcholy vráceny v uzlu `TSplineTopology.InnerVertices`.
 
 ## Vzorový soubor
 

doc/distrib/NodeHelpFiles/de-DE/Autodesk.DesignScript.Geometry.PanelSurfaceBoundaryCondition.Trim.md

@@ -1,5 +1,5 @@
 ## Im Detail
-Stutzen Sie überlappende Elemente bis zur Oberflächenbegrenzung.
+Stutzen Sie überlappende Panels bis zur Oberflächenbegrenzung.
 ___
 ## Beispieldatei
 

doc/distrib/NodeHelpFiles/de-DE/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
 ## Im Detail
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+`TSplineTopology.InnerVertices` gibt die Scheitelpunkte innerhalb der angegebenen Topologie zurück. Im folgenden Beispiel wird eine TSpline-Oberfläche erstellt, und anschließend werden die inneren Scheitelpunkte mit `TSplineTopology.InnerVertices` zurückgegeben.
 
 ## Beispieldatei
 

doc/distrib/NodeHelpFiles/es-ES/Autodesk.DesignScript.Geometry.PanelSurfaceBoundaryCondition.Trim.md

@@ -1,4 +1,4 @@
-## En detalle:
+## En detalle
 Recorte paneles solapados según el contorno de superficie.
 ___
 ## Archivo de ejemplo

doc/distrib/NodeHelpFiles/es-ES/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
 ## En detalle
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+`TSplineTopology.InnerVertices` devuelve los vértices dentro de la topología especificada. En el ejemplo siguiente, se crea una superficie TSpline y, a continuación, se devuelven los vértices interiores con `TSplineTopology.InnerVertices`.
 
 ## Archivo de ejemplo
 

doc/distrib/NodeHelpFiles/fr-FR/Autodesk.DesignScript.Geometry.PanelSurfaceBoundaryCondition.Trim.md

@@ -1,5 +1,5 @@
 ## Description approfondie
-Ajustez les panneaux qui se chevauchent jusqu'à la délimitation de la surface.
+Ajustez les panneaux qui se chevauchent jusqu'à la limite de la surface.
 ___
 ## Exemple de fichier
 

doc/distrib/NodeHelpFiles/fr-FR/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
-## Profondeur
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+## Description approfondie
+'TSplineTopology.InnerVertices' renvoie les sommets dans la topologie donnée. Dans l'exemple ci-dessous, une surface T-Spline est créée, puis les sommets internes sont renvoyés avec 'TSplineTopology.InnerVertices'.
 
 ## Exemple de fichier
 

doc/distrib/NodeHelpFiles/it-IT/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
 ## In profondità
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+`TSplineTopology.InnerVertices` restituisce i vertici all'interno della topologia specificata. Nell'esempio seguente, viene creata una superficie TSpline e vengono quindi restituiti i vertici interni con `TSplineTopology.InnerVertices`.
 
 ## File di esempio
 

doc/distrib/NodeHelpFiles/ja-JP/UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ.md

@@ -1,7 +1,7 @@
 <!--- Autodesk.DesignScript.Geometry.TSpline.TSplineTopology.InnerVertices --->
 <!--- UZ7LZDBGWQPVR7727ZYQZDLUW55DWAGDHV5P5O7EVZL4HMD3B7TQ --->
 ## 詳細
-`TSplineTopology.InnerVertices` returns the vertices within the given topology. In the example below, a TSpline surface is created and then the inner vertices are returned with `TSplineTopology.InnerVertices`.
+`TSplineTopology.InnerVertices` は、指定されたトポロジ内の頂点を返します。次の例では、T スプライン サーフェスが作成され、次に `TSplineTopology.InnerVertices` を使用して内側の頂点が返されます。
 
 ## サンプル ファイル
 

doc/distrib/NodeHelpFiles/ko-KR/Autodesk.DesignScript.Geometry.PanelSurfaceBoundaryCondition.Trim.md

@@ -1,5 +1,5 @@
 ## 상세
-겹치는 패널을 표면 경계에 맞게 자릅니다.
+겹치는 패널을 표면 경계까지 자릅니다.
 ___
 ## 예제 파일