feat: add support for flashing UF2 firmware (#133)

Author: raphaelcoeffic

.vitest/setupAfterEnv.ts

@@ -31,8 +31,6 @@ vi.mock("shared/dfu", () => ({
 //   return actual;
 // });
 
-vi.mock("react-ga", () => ({ exception: vi.fn() }));
-
 // vi.mock("use-media", () => {
 //   const actual = vi.importActual(
 //     "use-media"

…s__/cloudbuild-firmware-st16-2-11-0.json …s__/cloudbuild-firmware-st16-2-11-4.json__fixtures__/cloudbuild-firmware-st16-2-11-0.json renamed to __fixtures__/cloudbuild-firmware-st16-2-11-4.json __fixtures__/cloudbuild-firmware-st16-2-11-0.json renamed to __fixtures__/cloudbuild-firmware-st16-2-11-4.json

@@ -53,12 +53,16 @@ test.describe.parallel("Flashing", () => {
     ).toBeTruthy();
     expect(
       await (
-        await queries.findByText("Erased", undefined, { timeout: 10000 })
+        await queries.findByText("Firmware erased", undefined, {
+          timeout: 10000,
+        })
       ).isVisible()
     ).toBeTruthy();
     expect(
       await (
-        await queries.findByText("Flashed", undefined, { timeout: 10000 })
+        await queries.findByText("Firmware flashed", undefined, {
+          timeout: 10000,
+        })
       ).isVisible()
     ).toBeTruthy();
     expect(
@@ -99,12 +103,16 @@ test.describe.parallel("Flashing", () => {
     ).toBeTruthy();
     expect(
       await (
-        await queries.findByText("Erased", undefined, { timeout: 10000 })
+        await queries.findByText("Firmware erased", undefined, {
+          timeout: 10000,
+        })
       ).isVisible()
     ).toBeTruthy();
     expect(
       await (
-        await queries.findByText("Flashed", undefined, { timeout: 10000 })
+        await queries.findByText("Firmware flashed", undefined, {
+          timeout: 10000,
+        })
       ).isVisible()
     ).toBeTruthy();
     expect(

e2e/pages/firmware-wizard/flash-firmware.spec.ts

@@ -4,6 +4,8 @@
   "Add flag": "Дадаць сцяг",
   "Add new device": "Дадаць новую прыладу",
   "Available devices": "Даступныя прылады",
+  "Bootloader erased": "Bootloader erased",
+  "Bootloader flashed": "Bootloader flashed",
   "Build": "Build",
   "Build finished": "Build finished",
   "Building": "Зборка",
@@ -27,12 +29,15 @@
   "Could not create job: {{message}}": "Не атрымалася стварыць заданне: {{message}}",
   "Could not download firmware": "Не атрымалася загрузіць прашыўку",
   "Could not download firmware: {{message}}": "Не атрымалася загрузіць прашыўку: {{message}}",
+  "Could not erase existing bootloader": "Could not erase existing bootloader",
   "Could not erase existing firmware": "Не атрымалася сцерці існуючае ПЗ",
   "Could not load commits": "Не атрымалася загрузіць коміты",
   "Could not load releases": "Не атрымалася загрузіць рэлізы",
   "Could not load targets": "Не атрымалася загрузіць мэты",
+  "Could not reboot into bootloader": "Could not reboot into bootloader",
   "Could not unlock device: {{message}}": "Не атрымалася разблакаваць прыладу: {{message}}",
   "Could not use firmware": "Не атрымалася выкарыстаць убудаванае ПЗ",
+  "Could not write new bootloader to radio": "Could not write new bootloader to radio",
   "Could not write new firmware to radio": "Не атрымалася запісаць новае ПЗ на радыё",
   "Created": "Created",
   "Details": "Дэталі",
@@ -49,10 +54,12 @@
   "Downloading firmware": "Downloading firmware",
   "Downloading firmware data to be ready for flashing": "Загрузка дадзеных убудаванага ПЗ для падрыхтоўкі да перапрашыўкі",
   "Enable firmware updating": "Уключыць абнаўленне ПЗ",
-  "Erase": "Выдаліць",
-  "Erased": "Выдалена",
-  "Erasing": "Выдаляецца",
+  "Erase bootloader": "Erase bootloader",
+  "Erase firmware": "Erase firmware",
+  "Erasing bootloader": "Erasing bootloader",
+  "Erasing firmware": "Erasing firmware",
   "Error": "Памылка",
+  "Existing bootloader erased": "Existing bootloader erased",
   "Existing firmware erased": "Iснуючае ПЗ выдаленае",
   "Failed": "Failed",
   "Filters": "Фільтры",
@@ -61,16 +68,19 @@
   "Firmware data": "Дадзеныя ПЗ",
   "Firmware downloaded": "Firmware downloaded",
   "Firmware downloaded, ready to flash": "ПЗ загружана, гатова да прашыўкі",
+  "Firmware erased": "Firmware erased",
   "Firmware file saved": "Захаваны файл ПЗ",
+  "Firmware flashed": "Firmware flashed",
   "Firmware version": "Версія прашыўкі",
   "Flag": "Сцяг",
   "Flags": "Сцягі",
-  "Flash": "Прашыўка",
+  "Flash bootloader": "Flash bootloader",
+  "Flash firmware": "Flash firmware",
   "Flash via USB": "Прошивка праз USB",
-  "Flashed": "Прашыўка",
-  "Flashing": "Прашыўка",
+  "Flashing bootloader": "Flashing bootloader",
   "Flashing done": "Перапрашыўка завершана",
   "Flashing EdgeTX": "Прашыўка EdgeTX",
+  "Flashing firmware": "Flashing firmware",
   "Go back": "Назад",
   "How to access DFU for your handset": "Як атрымаць доступ да DFU для вашага апарата",
   "In queue": "In queue",
@@ -82,6 +92,7 @@
   "Local firmware file should be a binary (.bin)": "Лакальны файл прашыўкі павінен быць двойкавым (.bin)",
   "Missing flag": "Адсут сцяг",
   "Missing value": "Адсут значэнне",
+  "New bootloader flashed": "New bootloader flashed",
   "New firmware flashed": "Прашыта новае ПЗ",
   "Next": "Далей",
   "No devices found": "Прылады не знойдзены",
@@ -94,10 +105,18 @@
   "Pull request": "Запыт на абнаўленне",
   "Radio": "Радыё",
   "Radio model": "Мадэль радыё",
+  "Reboot": "Reboot",
+  "Reboot into bootloader": "Reboot into bootloader",
+  "Rebooted": "Rebooted",
+  "Rebooted into bootloader": "Rebooted into bootloader",
+  "Rebooting": "Rebooting",
+  "Rebooting into bootloader": "Rebooting into bootloader",
   "Refresh": "Абнавіць",
   "Remove": "Выдаліць",
+  "Remove existing bootloader": "Remove existing bootloader",
   "Remove existing firmware": "Выдаліце існуючае ПЗ",
   "Remove flash protection": "Зніміце абарону ад прашыўкі",
+  "Removing existing bootloader from radio": "Removing existing bootloader from radio",
   "Removing existing firmware from radio": "Выдаленне існуючага ПЗ з радыё",
   "Select a firmware": "Выбар ПЗ",
   "Select commit": "Выбар коміта",
@@ -110,12 +129,13 @@
   "Start flashing": "Пачаць прашыўку",
   "The type of radio you want to flash": "Тып радыё, які вы хочаце перапрашыць",
   "The version of EdgeTX to flash": "Версія Edge TX для ПЗ",
-  "Flash this radio via Bootloader and UF2": "Flash this radio via Bootloader and UF2",
   "These can be built locally or downloaded from the EdgeTX releases": "Яны могуць быць створаны лакальна ці загружаны з выпускаў Edge TX",
   "Unknown firmware": "Невядомае ПЗ",
   "Value": "Значэнне",
   "Verifying...": "Пацвярджэнне...",
+  "Write new bootloader": "Write new bootloader",
   "Write new firmware": "Запіс новага ПЗ",
+  "Writing new bootloader to radio": "Writing new bootloader to radio",
   "Writing new firmware to radio, this could take several minutes": "Запіс новага ПЗ у Радыё можа заняць некалькі хвілін",
   "You may now want to <1>setup your SD Card</1>": "Магчыма, зараз вы захочаце <1>наладзіць SD-карту</1>",
   "You're all set!": "У вас усё гатова!",

locales/be/flashing.json

@@ -4,6 +4,8 @@
   "Add flag": "Add flag",
   "Add new device": "Přidat zařízení",
   "Available devices": "Dostupná zařízení",
+  "Bootloader erased": "Bootloader erased",
+  "Bootloader flashed": "Bootloader flashed",
   "Build": "Sestavit",
   "Build finished": "Build finished",
   "Building": "Sestavuji",
@@ -27,12 +29,15 @@
   "Could not create job: {{message}}": "Nemohu vytvořit úlohu: {{message}}",
   "Could not download firmware": "Nemohu stáhnout firmware",
   "Could not download firmware: {{message}}": "Nemohu stáhnout firmware: {{message}}",
+  "Could not erase existing bootloader": "Could not erase existing bootloader",
   "Could not erase existing firmware": "Nemohu smazat stávající firmware",
   "Could not load commits": "Nemohu stáhnout commity",
   "Could not load releases": "Nemohu stáhnout vydání",
   "Could not load targets": "Nemohu stáhnout cíle",
+  "Could not reboot into bootloader": "Could not reboot into bootloader",
   "Could not unlock device: {{message}}": "Could not unlock device: {{message}}",
   "Could not use firmware": "Nemohu použít firmware",
+  "Could not write new bootloader to radio": "Could not write new bootloader to radio",
   "Could not write new firmware to radio": "Nemohu zapsat firmware do rádia",
   "Created": "Created",
   "Details": "Detaily",
@@ -49,10 +54,12 @@
   "Downloading firmware": "Downloading firmware",
   "Downloading firmware data to be ready for flashing": "Stahuji firmware data",
   "Enable firmware updating": "Enable firmware updating",
-  "Erase": "Smazat",
-  "Erased": "Smazáno",
-  "Erasing": "Mazání",
+  "Erase bootloader": "Erase bootloader",
+  "Erase firmware": "Erase firmware",
+  "Erasing bootloader": "Erasing bootloader",
+  "Erasing firmware": "Erasing firmware",
   "Error": "Chyba",
+  "Existing bootloader erased": "Existing bootloader erased",
   "Existing firmware erased": "Stávající firmware smazán",
   "Failed": "Failed",
   "Filters": "Filtry",
@@ -61,16 +68,19 @@
   "Firmware data": "Firmware data",
   "Firmware downloaded": "Firmware downloaded",
   "Firmware downloaded, ready to flash": "Firmware stažen, připraveno k zapsání",
+  "Firmware erased": "Firmware erased",
   "Firmware file saved": "Soubor s firmwarem uložen",
+  "Firmware flashed": "Firmware flashed",
   "Firmware version": "Verze firmwaru",
   "Flag": "Flag",
   "Flags": "Flags",
-  "Flash": "Zapsat",
+  "Flash bootloader": "Flash bootloader",
+  "Flash firmware": "Flash firmware",
   "Flash via USB": "Zapsat přes USB",
-  "Flashed": "Zapsáno",
-  "Flashing": "Zapisování",
+  "Flashing bootloader": "Flashing bootloader",
   "Flashing done": "Zapisování dokončeno",
   "Flashing EdgeTX": "Zapisování EdgeTX",
+  "Flashing firmware": "Flashing firmware",
   "Go back": "Zpět",
   "How to access DFU for your handset": "Jak přistupovat k DFU pro váš přístroj",
   "In queue": "In queue",
@@ -82,6 +92,7 @@
   "Local firmware file should be a binary (.bin)": "Lokální soubor firmwaru by měl být binární (.bin)",
   "Missing flag": "Missing flag",
   "Missing value": "Missing value",
+  "New bootloader flashed": "New bootloader flashed",
   "New firmware flashed": "Nový firmware zapsán",
   "Next": "Další",
   "No devices found": "Žádná zařízení nebyla nalezena",
@@ -94,10 +105,18 @@
   "Pull request": "Pull requesty",
   "Radio": "Rádio",
   "Radio model": "Model rádia",
+  "Reboot": "Reboot",
+  "Reboot into bootloader": "Reboot into bootloader",
+  "Rebooted": "Rebooted",
+  "Rebooted into bootloader": "Rebooted into bootloader",
+  "Rebooting": "Rebooting",
+  "Rebooting into bootloader": "Rebooting into bootloader",
   "Refresh": "Obnovit",
   "Remove": "Odstranit",
+  "Remove existing bootloader": "Remove existing bootloader",
   "Remove existing firmware": "Odstranit stávající firmware",
   "Remove flash protection": "Remove flash protection",
+  "Removing existing bootloader from radio": "Removing existing bootloader from radio",
   "Removing existing firmware from radio": "Odstraňuji stávající firmware z rádia",
   "Select a firmware": "Vybrat firmware",
   "Select commit": "Vybrat commit",
@@ -110,12 +129,13 @@
   "Start flashing": "Zapsat do rádia",
   "The type of radio you want to flash": "Typ rádia, do kterého chcete zapsat firmware",
   "The version of EdgeTX to flash": "Verze EdgeTX, kterou chcete zapsat do rádia",
-  "Flash this radio via Bootloader and UF2": "Flash this radio via Bootloader and UF2",
   "These can be built locally or downloaded from the EdgeTX releases": "Můžete sestavit ručně nebo stáhnout EdgeTX vydání",
   "Unknown firmware": "Neznámý firmware",
   "Value": "Value",
   "Verifying...": "Ověřuji...",
+  "Write new bootloader": "Write new bootloader",
   "Write new firmware": "Zapsat nový firmware",
+  "Writing new bootloader to radio": "Writing new bootloader to radio",
   "Writing new firmware to radio, this could take several minutes": "Zapisuji nový firmware do rádia. Může to trvat několik minut",
   "You may now want to <1>setup your SD Card</1>": "Možná budete chtít <1>nastavit SD kartu</1>",
   "You're all set!": "Vše nastaveno!",

locales/cs/flashing.json

@@ -4,6 +4,8 @@
   "Add flag": "Tilføj valg",
   "Add new device": "Tilføj ny enhed",
   "Available devices": "Mulige enheder",
+  "Bootloader erased": "Bootloader erased",
+  "Bootloader flashed": "Bootloader flashed",
   "Build": "Byg",
   "Build finished": "Byg færdigt",
   "Building": "Bygger",
@@ -27,12 +29,15 @@
   "Could not create job: {{message}}": "Kunne ikke oprette job: {{message}}",
   "Could not download firmware": "Kunne ikke hente firmware",
   "Could not download firmware: {{message}}": "Kunne ikke hente firmware: {{message}}",
+  "Could not erase existing bootloader": "Could not erase existing bootloader",
   "Could not erase existing firmware": "Kunne ikke slette eksisterende firmware",
   "Could not load commits": "Kunne ikke hente indlæse git commit",
   "Could not load releases": "Kunne ikke indlæse version",
   "Could not load targets": "Kunne ikke indlæse mål software",
+  "Could not reboot into bootloader": "Could not reboot into bootloader",
   "Could not unlock device: {{message}}": "Kunne ikke låse enhed op: {{message}}",
   "Could not use firmware": "Kunne ikke anvende firmware",
+  "Could not write new bootloader to radio": "Could not write new bootloader to radio",
   "Could not write new firmware to radio": "Kunne ikke skrive ny firmware",
   "Created": "Oprettet",
   "Details": "Detaljer",
@@ -49,10 +54,12 @@
   "Downloading firmware": "Henter firmware",
   "Downloading firmware data to be ready for flashing": "Henter firmware informationer til at klargøre til brænding",
   "Enable firmware updating": "Aktiver firmware opdatering",
-  "Erase": "Slet",
-  "Erased": "Slettet",
-  "Erasing": "Sletter",
+  "Erase bootloader": "Erase bootloader",
+  "Erase firmware": "Erase firmware",
+  "Erasing bootloader": "Erasing bootloader",
+  "Erasing firmware": "Erasing firmware",
   "Error": "Fejl",
+  "Existing bootloader erased": "Existing bootloader erased",
   "Existing firmware erased": "Nuværende firmware slettet",
   "Failed": "Fejlet",
   "Filters": "Filter",
@@ -61,16 +68,19 @@
   "Firmware data": "Firmware dato",
   "Firmware downloaded": "Firmware hentet",
   "Firmware downloaded, ready to flash": "Firmware hentet, klart til brænding",
+  "Firmware erased": "Firmware erased",
   "Firmware file saved": "Firmware image gemt",
+  "Firmware flashed": "Firmware flashed",
   "Firmware version": "Firmware version",
   "Flag": "valg",
   "Flags": "Tilvalg",
-  "Flash": "Brænding",
+  "Flash bootloader": "Flash bootloader",
+  "Flash firmware": "Flash firmware",
   "Flash via USB": "Brænding via USB",
-  "Flashed": "Brænding færdig",
-  "Flashing": "Brænding igang",
+  "Flashing bootloader": "Flashing bootloader",
   "Flashing done": "Brænding klar",
   "Flashing EdgeTX": "Brænder EdgeTX image",
+  "Flashing firmware": "Flashing firmware",
   "Go back": "Tilbage",
   "How to access DFU for your handset": "Sådan får du adgang til DFU for din håndholdte enhed",
   "In queue": "I kø",
@@ -82,6 +92,7 @@
   "Local firmware file should be a binary (.bin)": "En lokal fil skal være en binær fil (.bin)",
   "Missing flag": "Manglende flag",
   "Missing value": "Manglende værdi",
+  "New bootloader flashed": "New bootloader flashed",
   "New firmware flashed": "Ny firmware image brændt",
   "Next": "Næste",
   "No devices found": "Ingen enhed er fundet",
@@ -94,10 +105,18 @@
   "Pull request": "git Pull Request",
   "Radio": "Radio",
   "Radio model": "Radio model",
+  "Reboot": "Reboot",
+  "Reboot into bootloader": "Reboot into bootloader",
+  "Rebooted": "Rebooted",
+  "Rebooted into bootloader": "Rebooted into bootloader",
+  "Rebooting": "Rebooting",
+  "Rebooting into bootloader": "Rebooting into bootloader",
   "Refresh": "Genfrisk",
   "Remove": "Fjern",
+  "Remove existing bootloader": "Remove existing bootloader",
   "Remove existing firmware": "Fjern eksisterende firmware",
   "Remove flash protection": "Fjern beskyttelse mod brænding",
+  "Removing existing bootloader from radio": "Removing existing bootloader from radio",
   "Removing existing firmware from radio": "Fjerne eksisternde firmware i radio",
   "Select a firmware": "Vælg firmware image",
   "Select commit": "Vælg git commit",
@@ -110,12 +129,13 @@
   "Start flashing": "Begynder brænding",
   "The type of radio you want to flash": "Radio model, som skal opdateres",
   "The version of EdgeTX to flash": "EdgeTX version, som skal installeres",
-  "Flash this radio via Bootloader and UF2": "Flash this radio via Bootloader and UF2",
   "These can be built locally or downloaded from the EdgeTX releases": "Disse kan bygges lokalt eller hentes som EdgeTX version",
   "Unknown firmware": "Ukendt firmware image",
   "Value": "værdi",
   "Verifying...": "Bekræfter...",
+  "Write new bootloader": "Write new bootloader",
   "Write new firmware": "Skriver ny firmware",
+  "Writing new bootloader to radio": "Writing new bootloader to radio",
   "Writing new firmware to radio, this could take several minutes": "Skriver nyt firmware image til radio, kan tage flere minutter",
   "You may now want to <1>setup your SD Card</1>": "Du ønsker nok nu, at <1>indstille SD kort</1>",
   "You're all set!": "Alt klart!",