This Folder contains modifications for the Enraged Rabbit
Update the following table with the information about your mod:
- Your name
- A link to your sub-folder
- A short description of your mod
- The component the mod is designed for. Use
:heavy_check_mark:for ✔️,:x:for ❌
like so:
| Creator | [Mod title](link) | Description | :x: | :x: |
| Creator | Mod title | Description | Feeder | Patch |
|---|---|---|---|---|
| TheWarolf | AB Toolhead Sensor | Makes the standard AB clockwork "smart" by inserting filament sensors in the toolhead. Uses microswitch + 7mm steel ball combo. | ✔️ | ❌ |
| Tircown | Bearing_Block_Passthrough | Allows to do tests or add a temporary spool without taking apart the full setup while still benefit from the sensors of ERCF. | ✔️ | ❌ |
| EtteGit | Closed_Exhaust_Plate | Replaces the nominal V2 exhaust parts with a close, sealed plate. | ❌ | ❌ |
| TheBelin | EasyPatchLoader | Makes it easier to load Carrot Patch. | ❌ | ✔️ |
| Drachenkaetzchen | Extrusion Mounting Brackets | Extrusion mounting brackets to pre-assemble the ERCF and/or the ERCPs | ✔️ | ✔️ |
| Tobi0892 | IKEA Drybox Carrot Patch | Puts the Carrot Patch into a sealed 10.6l IKEA 365+ box to maintain ~10% humidity. | ❌ | ✔️ |
| fsironman | JST-SM-Connectors | Modifies the M4 Arm to use JST-SM instead of microfit connectors | ✔️ | ❌ |
| simon-adriaanse | LGX_Mount_TL_IR_Sensor | This mount is for the TriangleLabs IR sensor. | ✔️ | ❌ |
| th3fallen | LGX_Toolhead_Sensor | ✔️ | ❌ | |
| Falovan | Narrow KVP Spool Ramp | Adds a ramp to the carrot patch to prevent narrow spools from catching | ❌ | ✔️ |
| th3fallen | Orbiter_Toolhead_Sensor | ✔️ | ❌ | |
| jorender | Printable_drag_chain | A printable cable chain suitable for use with the Enraged Rabbit Carrot Feeder | ✔️ | ❌ |
| miguelangel-nubla | Printable_Mounts | Printable mounts for ERCF and ERCP Array without extra 2020 extrusions. | ✔️ | ✔️ |
| claytono | Skirt-Microfit-Inserts | An iteration on dvorak74's Micro-Fit inserts, based around meteyou's fantastic G-code button mod. | ✔️ | ❌ |
| Drachenkaetzchen | Upside Down ERCP | Mod to allow mounting the ERCP upside down, for example, below a shelf | ❌ | ✔️ |
| str1pes | MagFeet | Easy mounting/removal for 2020 extrusions | ❌ | ✔️ |
| joey2point0 | 4L_Filament_Buffer | Utilizes 4L cereal box container to make a sealed filament buffer. | ❌ | ✔️ |
| ~MHz | Orbiter_V1.5_V2_on_AB | Yet Additional Orbiter v1.5 Mechanical and Inductive Extruder to Toolhead adapter and a WIP Orbiter v2 Inductive Extruder to Toolhead adapter | ✔️ | ❌ |