PIC32Lua in stand alone PCB with PIC32MX795F512.

[euclas]

Hello.
I'm developing a stand alone PCB with PIC32MX795F512 and would like to test it with PIC32Lua. Please help me?
You could send a message for me?
Thank you.
Euclides Franco de Rezende.
euclas@gmail.com
Brazil.

[FMMT666]

Sure, let's get this running. For science \o/
How can I help?

[euclas]

Great!

Initially and if possible look at the card I sent to manufacturing and see
if there is any impediment to use it along with the recorder (PICkit3).

Attached.

With this board I intend to record the firmware and start doing tests.
I found the following project:

http://geoffg.net/micromite.html

The circuit is here:

http://geoffg.net/MaximiteDesign.html

The idea is to match the PIC32Lua with this circuit. Thus, besides the
chipKIT-Max32 the Maximite (or other card based on it, In this case, a step
beyond the PCB shown) could use Lua (much more portable and modern
language) for programming.

Any comments or idea to help me?

Euclides Franco de Rezende
euclas@gmail.com

• Translated from Portuguese into English using Google translate. So, thank
  you for your patience.

2015-05-19 20:13 GMT-03:00 FMMT666 notifications@github.com:

Sure, let's get this running. For science \o/
How can I help?

—
Reply to this email directly or view it on GitHub
#1 (comment).

[FMMT666]

As far as I can see, you don't need to change anything.
Even the PIC32Lua binary should run on this.

Just remember that PIC32Lua does not yet support a virtual
comm port via USB (and this will probably only get built in
for the MZ version) and you'll need one of the serial interfaces.

[euclas]

Hi.

To program the PIC32MX795F512 is only done through the SD card?

There is no minimum circuit that can be mounted so that you can take a test?

Only using the ChipKit Max32?

Thank you.

Euclides Franco de Rezende.
euclas@gmail.com

2015-05-21 19:30 GMT-03:00 FMMT666 notifications@github.com:

As far as I can see, you don't need to change anything.
Even the PIC32Lua binary should run on this.

Just remember that PIC32Lua does not yet support a virtual
comm port via USB (and this will probably only get built in
for the MZ version) and you'll need one of the serial interfaces.

—
Reply to this email directly or view it on GitHub
#1 (comment).

[euclas]

Was this part of the circuit enough to program the firmware in the pic?
(Continues after drawing).

[image: Imagem inline 1]
After mounting the SD card:...

[image: Imagem inline 2]

...With the file BOOT32.LUA everything would work?

2015-05-21 20:13 GMT-03:00 Euclides Rezende euclas@gmail.com:

Hi.

To program the PIC32MX795F512 is only done through the SD card?

There is no minimum circuit that can be mounted so that you can take a
test?

Only using the ChipKit Max32?

Thank you.

Euclides Franco de Rezende.
euclas@gmail.com

2015-05-21 19:30 GMT-03:00 FMMT666 notifications@github.com:

As far as I can see, you don't need to change anything.

Even the PIC32Lua binary should run on this.

Just remember that PIC32Lua does not yet support a virtual
comm port via USB (and this will probably only get built in
for the MZ version) and you'll need one of the serial interfaces.

—
Reply to this email directly or view it on GitHub
#1 (comment).

[FMMT666]

No, the firmware can not be just loaded via an SD-card.

Unless the PIC32 is preprogrammed with a bootloader, like the
Chipkit-MAX32, for example, you'll need a programmer.
Also notice that different bootloaders might differ in size, so the
linker script needs to be adjusted.

[euclas]

Yes. I understood that the Bootloader is programmed by ICSP.
And the program in Lua is loaded via the SD card containing the BOOT32.LUA
script. Correct?

2015-05-22 18:46 GMT-03:00 FMMT666 notifications@github.com:

No, the firmware can not be just loaded via an SD-card.

Unless the PIC32 is preprogrammed with a bootloader, like the
Chipkit-MAX32, for example, you'll need a programmer.
Also notice that different bootloaders might differ in size, so the
linker script needs to be adjusted.

—
Reply to this email directly or view it on GitHub
#1 (comment).

[FMMT666]

PIC32Lua operates like a standard "desktop" Lua that is running in a console.
What you type in your serial terminal application is interpreted immediately and
you copy and paste lua code into the interpreter, e.g. as function snippets.

To start a file from SD-Card, use dofile(), loadfile(), e.g., see http://luatut.com/dofile.html

The 'BOOT32.LUA' file is only required if you what to execute Lua code right after
you turned on your device, just like an "autoexec.bat" did on DOS machines.

[euclas]

Hi.

I am in Brazil, I made contact with Professor Roberto Ierusalimschy
(creator of the language). I wonder if you know any Brazilian who is using
PIC32LUA?
Thereby see support those already using to help me in my project.

Thank you.

Euclides.

2015-05-23 9:09 GMT-03:00 FMMT666 notifications@github.com:

PIC32Lua operates like a standard "desktop" Lua that is running in a
console.
What you type in your serial terminal application is interpreted
immediately and
you copy and paste lua code into the interpreter, e.g. as function
snippets.

To start a file from SD-Card, use dofile(), loadfile(), e.g., see
http://luatut.com/dofile.html

The 'BOOT32.LUA' file is only required if you what to execute Lua code
right after
you turned on your device, just like an "autoexec.bat" did on DOS machines.

—
Reply to this email directly or view it on GitHub
#1 (comment).

[FMMT666]

No, sorry.
Except for a few, I don't know where they live...

Indeed, I am still not sure what your major issues are...
Is it that you don't know how to program the PIC or how
to use PIC32Lua with that board?

[euclas]

Hi.

At first my problem is to make the PIC32LUA be installed on the board, but
do not want to use the PICkit 32. I want to develop my card because my
intention is that this card becomes a product or part of a product.
Building on its software. There is no design of a PCB on the blog, so I
think it will be as an open question. So I intend to design a PCB which
also could be an option, less costly to acquire.
In this way it would be easier for me to know if anyone here in Brazil have
used the PIC32LUA so we can share experiences.
Thank you for your attention.

Euclides.

2015-05-28 16:29 GMT-03:00 FMMT666 notifications@github.com:

No, sorry.
Except for a few, I don't know where they live...

Indeed, I am still not sure what your major issues are...
Is it that you don't know how to program the PIC or how
to use PIC32Lua with that board?

—
Reply to this email directly or view it on GitHub
#1 (comment).

[euclas]

I'm sorry. I did not show the card I sent you to prototype manufacture the
plate I want to finally draw. All pins are available to do tests. Except
the power that is all concentrated in two pins.

[image: Imagem inline 1]

The programming pins are as follows: 26 - PGEC2, 27 - PGED2 as yet set up
the other components. If you knew somebody else who made a similar assembly
would be easier for me to identify problems.

Thank you.

Euclides.

2015-05-28 16:51 GMT-03:00 Euclides Rezende euclas@gmail.com:

Hi.

At first my problem is to make the PIC32LUA be installed on the board, but
do not want to use the PICkit 32. I want to develop my card because my
intention is that this card becomes a product or part of a product.
Building on its software. There is no design of a PCB on the blog, so I
think it will be as an open question. So I intend to design a PCB which
also could be an option, less costly to acquire.
In this way it would be easier for me to know if anyone here in Brazil
have used the PIC32LUA so we can share experiences.
Thank you for your attention.

Euclides.

2015-05-28 16:29 GMT-03:00 FMMT666 notifications@github.com:

No, sorry.

Except for a few, I don't know where they live...

Indeed, I am still not sure what your major issues are...
Is it that you don't know how to program the PIC or how
to use PIC32Lua with that board?

—
Reply to this email directly or view it on GitHub
#1 (comment).

[FMMT666]

Sorry, I don't see any image(s) there...
Could you upload it somewhere?

A minimum PIC32 configuration only requires nothing else but a power supply,
pull-up of MCLR, an oscillator and the connections to the programmer...
In addition you'll need a serial connection to your PC (FTDI, MCP2200, CP21xx, ...).

Maybe I'll create a minimum schematic/layout next weekend, if I manage to find some time...

[FMMT666]

Here, just found this:
http://eprojects.ljcv.net/2011/10/yet-another-pic32-proto-board.html
Maybe this helps a little...

[euclas]

Can you see?:
http://labdegaragem.com/photo/placa-adaptadora-para-pic32mx795f512

I drew in Eagle and sent to manufacturing. I plan to use it to mount on
another plate like a big integrated circuit. I will use this other PCB to
start making the prototype.

2015-05-28 18:46 GMT-03:00 FMMT666 notifications@github.com:

Sorry, I don't see any image(s) there...
Could you upload it somewhere?

A minimum PIC32 configuration only requires nothing else but a power
supply,
pull-up of MCLR, an oscillator and the connections to the programmer...
In addition you'll need a serial connection to your PC (FTDI, MCP2200,
CP21xx, ...).

Maybe I'll create a minimum schematic/layout next weekend, if I manage to
find some time...

—
Reply to this email directly or view it on GitHub
#1 (comment).