Add a Wait timer for the click that clicks on the "Start Quest" button after selecting a support from the support list. / Have FGA detect the "Start Quest" button separately so that when it detects it, it can press it again on its own.

[dragonmagicstar]

Preparation

• No one has asked for this feature before in other issues (even the closed ones)

Describe the feature

Suggestion 1: Add a Wait timer specifically for the click that clicks on the "Start Quest" button after selecting a support from the support list.

Suggestion 2: Have FGA detect the "Start Quest" button separately so that when it detects it, it can press it again on its own.

My current issue is that FGA presses the "Start Quest" button just a little bit too fast. And since my device hasn't finished loading by then, it gets stuck on the party setup screen. Let's call this Problem 1, which is the main problem.

My current solution to Problem 1 was to increase the timer for "Wait After Clicking" in Fine-Tune settings' "Clicks" up to 1500ms. But in doing so, causes every other click to be slower (as the settings' intended purpose). So, Problem 2 occurs: Everything is slower during in-game quest.

My temporary solution to Problem 2 with Problem 1 in mind, is to set every timer in "Wait" to a really low setting.
Skill Delay: 500ms > 0ms
Wait Before Turn: 500ms > 0ms
Wait Before Cards: 2000ms > 100ms
But of course, since the wait timers are specific, I cannot really do anything about the other clicks that are under "Wait After Clicking" which means, all the other clicks that are not specific to their own fine tune settings in the quest are very slow.

The suggestions I've come up with are some suggestions that only a dev can implement into FGA to fix initial Problem 1.
Both will solve the initial Problem 1 and I can set my settings back to normal so that I wouldn't have Problem 2 anymore as well.

Video is of recording of Problem 1 (main problem)
https://youtu.be/Gdckjd2UAqA

Details if Needed:
FGA Version: 2980 (Playstore)
Device: Galaxy Tab A SM-T510; Android Version 11
Screen Size: 1920 x 1200
Ram: 3GB

[dragonmagicstar]

Oh, increasing transition time is an even simpler solution than two I suggested.