CrowPanel Advanced 7"

[Satellite83]

Hello. If it's not difficult, you can add the firmware for CrowPanel Advanced - 7" Main Chip-ESP32-S3-WROOM-1-N16R8 with the SC7277 screen driver to Open HASP. Touch GT-911.

The old firmware doesn't fit, the screen won't even start.

[fvanroie]

There is no support for the CrowPanel Advanced 7" yet. Someone with access to the device needs to create a new configuration for it.

[Satellite83]

Hello. Support for WAVESHARE ESP-32-S3-Touch-LCD-7 panels with on a chip-ESP32-S3-WROOM-1-N8R8, display - EK9716, touch screen -GT 911 is also missing?
The firmware is elecrow-s3-8048c070_full_4MB_v0.7.0-rc12_cd34d89.bin didn't fit.

I have a module like this https://esp3d.io/ESP3D-TFT/Version_1.X/hardware/esp32-s3/waveshare-70-8048/

[fvanroie]

You must use the proper firmware file for the exact panel. Using an Elecrow firmware for Waveshare devices will not work.

[Satellite83]

I did not find the necessary firmware file. I just do not know how to assemble the firmware for WAVESHARE ESP-32-S3-Touch-LCD-7 with chip -ESP32-S3-WROOM-1-N8R8, display - EK9716, touch screen -GT 911.

[Satellite83]

I was wrong, I have a module https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-7 display-ST7262. It works with ESPHome. But it is not convenient for me, I would like OpenHasp.

[fvanroie]

Download waveshare.zip from the bottom of the Github Actions page. Try ws_esp32_s3_touch_lcd_4p3.bin.
According to this thread, the 4.3" and 7.0" use the same pinout and drivers.

[Satellite83]

Thanks, WAVESHARE ESP-32-S3-Touch-LCD Display-7 turned on. But it looks like the 7" panel is different from 4.3" because there is a color mismatch.