incorporate new transforms module

[donald-e-boyce]

Incorporate work on transforms done by Oscar Villellas. There are some API changes.

[psavery]

I believe this is the relevant repository: https://github.com/ovillellas/xrd-transforms

Depending on how extensive the API changes are, we may be able to have some conversion functions that use the old API and automatically convert to the new API. If we do this well enough, we may not even need to change any of the old function calls. It would be great to break as few things as possible!

[psavery]

I just performed some profiling for the monolithic multiruby dexelas example to help us determine which methods from the xrd-transforms repository we should target first for both integration and testing. It appears to me that fit-grains will benefit a lot more from the xrd-transforms than find-orientations. More about that below.

NOTE: I turned off all multiprocessing and multithreading for the profiling, so that we can see specifically which transform functions are taking up the most time. This profiling was thus done with a single process and a single thread (the methods run faster when we enable parallelism).

Find Orientations

I believe that find-orientations won't benefit much from the xrd-transforms. You can see the whole profile here: find_orientations_profile.txt

Out of the ~115 seconds that find-orientations took, the transforms function that took the most time was detectorXYToGvec at ~3 seconds (~2.6% of the time). The calls that took the most time were in the _run_histograms function. In fact, the one thing that is taking up most of the time is the thresholding for generating the eta omega maps right here. This is because a deep copy of every image is made and then modified.

If we modify the settings so that there is no threshold, then the total time taken is ~57 seconds (results here: find_orientations_no_threshold_profile.txt). In this case, a lot of the time is being taken up in numpy, fast_histogram, and scipy methods. The detectorXYToGvec takes up ~5.5% of the time.

However, fit-grains may benefit a lot from the xrd-transforms.

Fit Grains

For fit-grains, the total run time was ~430 seconds, and the amount of time the methods anglesToGVec, gvecToDetectorXYArray, and makeOscillRotMatArray took were 20.8%, 16.3%, and 7.9%, respectively (for a total of ~45% of the time). Profile results are here:
fit_grains_profile.txt

Still, calling numpy.zeros() took up 23% of the time in fit-grains, which makes me wonder if there's a way to improve that (by calling numpy.zeros() less often or with a dtype that uses less memory).

For the cumulative profile (which includes the time taken both in the function and the functions that the function calls), the vast majority of the time was spent in pull_spots() (96% of the time) and _project_on_detector_plane (49% of the time).

Conclusion

I think it's best for us to try to migrate over anglesToGVec, gvecToDetectorXYArray, and makeOscillRotMatArray first and see the new performance afterward.

[donald-e-boyce]

That sounds good.

…

On Thu, Mar 16, 2023 at 12:31 PM Patrick Avery ***@***.***> wrote: I just performed some profiling for the monolithic multiruby dexelas example to help us determine which methods from the xrd-transforms repository we should target first for both integration and testing. It appears to me that fit-grains will benefit a lot more from the xrd-transforms than find-orientations. More about that below. NOTE: I turned off all multiprocessing and multithreading for the profiling, so that we can see specifically which transforms functions are taking up the most time. This profiling was thus done with a single process and a single thread. Find Orientations I believe that find-orientations won't benefit much from the xrd-transforms. You can see the whole profile here: find_orientations_profile.txt <https://github.com/HEXRD/hexrd/files/10993103/find_orientations_profile.txt> Out of the ~115 seconds that find-orientations took, the transforms function that took the most time was detectorXYToGvec at ~3 seconds (~2.6% of the time). The calls that took the most time were in the _run_histograms function. In fact, the one thing that is taking up most of the time is the thresholding for generating the eta omega maps right here <https://github.com/HEXRD/hexrd/blob/11a27dac32c7662301ff0e7c66357d771f6abd6e/hexrd/instrument.py#L4369-L4370>. This is because a deep copy of every image is made and then modified. If we modify the settings so that there is no threshold, then the total time taken is ~57 seconds (results here: find_orientations_no_threshold_profile.txt <https://github.com/HEXRD/hexrd/files/10993159/find_orientations_no_threshold_profile.txt>). In this case, a lot of the time is being taken up in numpy, fast_histogram, and scipy methods. The detectorXYToGvec takes up ~5.5% of the time. However, fit-grains may benefit a lot from the xrd-transforms. Fit Grains For fit-grains, the amount of time the methods anglesToGVec, gvecToDetectorXYArray, and makeOscillRotMatArray took were 20.8%, 16.3%, and 7.9%, respectively (for a total of ~45% of the time). Profile results are here: fit_grains_profile.txt <https://github.com/HEXRD/hexrd/files/10993201/fit_grains_profile.txt> Still, calling numpy.zeros() took up 23% of the time in fit-grains, which makes me wonder if there's a way to improve that. For the cumulative profile (which includes the time taken both in the function and the functions that the function calls), the vast majority of the time was spent in pull_spots() (96% of the time) and _project_on_detector_plane (49% of the time). Conclusion I think it's best for us to try to migrate over anglesToGVec, gvecToDetectorXYArray, and makeOscillRotMatArray first and see the new performance afterward. — Reply to this email directly, view it on GitHub <#495 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAIWT6JEX5M3OEO5T3BDRWTW4M56XANCNFSM6AAAAAAUPGY4BU> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[psavery]

@saransh13 we actually didn't integrate all of the new transforms functions, but only the ones that were relevant for running fit-grains. As such, I'll reopen this.

[ZackAttack614]

@psavery please let me know if this can be closed now, or if we need to migrate anything else. I would like to knock this out soon.

[psavery]

Transforms were rewritten (again) in #744.