res_smdr_whozz: Add SMDR server for WHOZZ Calling? devices.

Adds a module that acts as an SMDR server for WHOZZ Calling? call
accounting devices, receiving events from the device via serial
connection and dispatching corresponding CDRs using the Asterisk
CDR engine.

Author: InterLinked1

README.md

@@ -19,6 +19,7 @@ PhreakScript installs:
    - Broadworks compatible Shared Call Appearances (PJSIP)
    - Presence publishing (PJSIP)
    - Message Send Protocol send support
+   - SMDR support for "WHOZZ Calling?" call accounting devices
    - AGI `RECORD FILE` option to require noise before silence detection
    - Optional build enhancements
       - `chan_sccp` (improved community Skinny/SCCP channel driver), with compilation fixes

configs/samples/res_smdr_whozz.conf.sample

@@ -0,0 +1,29 @@
+; res_smdr_whozz.conf - SMDR for "WHOZZ Calling?" call accounting devices
+
+; TIPS: Both serial and parallel wiring of the phone line to your WHOZZ Calling? device are supported.
+; It is recommended that you wire in parallel if possible to avoid putting the unit in the voice path.
+; Additionally, please note that the WHOZZ Calling? units do NOT support pulse dialing,
+; and pulse-to-tone converters may degrade the quality of the voice path. You may wish
+; to drive a slave / follower line to follow hook state changes and receive dialed digits (but not audio)
+; and connect that to the unit instead.
+; As always, USE AT YOUR OWN RISK.
+
+;[general]
+;device=/dev/ttyS0 ; Device name of serial port to which WHOZZ Calling? unit is connected (9600/N/1)
+
+;[line-1]
+;line = 1 ; Line number as configured on WHOZZ Calling? unit.
+;device=DAHDI/1 ; Optional. Device name of associated FXO port connected to this same line.
+                ; If configured, if calls are made using this device, they will be ignored by this module.
+                ; This allows this module to create CDRs for calls made directly on a phone line connected
+                ; to an Asterisk FXO port, when the call was NOT made through Asterisk,
+                ; but allows Asterisk to create the CDR record if the call was made through Asterisk.
+                ; This avoids duplicate CDR records for the same call.
+; Optional variables to set, for example, for outgoing calls, you could do a lookup to determine if a call is local, long distance, etc. based on dialed number.
+;setvar=CDR(trunkgrp)=pots-1
+;setvar=CDR(direction)=${WHOZZ_DIRECTION}
+;setvar=CDR(line)=${WHOZZ_LINE}
+;setvar=CHANNEL(amaflags)=BILLING
+
+;[line-2]
+;line = 2

phreaknet.sh

@@ -2116,6 +2116,7 @@ phreak_patches() { # $1 = $PATCH_DIR, $2 = $AST_SRC_DIR
 	phreak_tree_module "res/res_msp.c"
 	phreak_tree_module "res/res_phreaknet.c"
 	phreak_tree_module "res/res_pjsip_presence.c"
+	phreak_tree_module "res/res_smdr_whozz.c"
 
 	if [ -d /etc/dahdi ]; then
 		phreak_tree_module "apps/app_loopdisconnect.c"