Schwinn Windrigger profile

[eriknz]

schwinn windrigger 251219.zip
I've attached a rowing machine profile and training data from a 10 minute session for my Schwinn Windrigger. I'm sure it's not perfect but it roughly matches what the original computer says and since I'm just using it to track my progress, I think it's good enough for me.
Hopefully it helps someone.

[JaapvanEkris]

Thanks! I'll add it to the existing profiles.

Jaap

[acoolsteve]

Hello, I also have a Schwinn Windrigger.
Unfortunately it has a broken screen and trying to fix/replace it lead me to this project.
Could some point me to the instructions to get this profile into ORM.
thanks

[eriknz]

windrigger_config_and_profile.zip
I've attached a new zip with my config and the windrigger profile. I've changed the gpio pin in the config.js in the zip to pin 17 which matches the original setup instructions (I use pin 26 because I'm using a gpio LCD screen).
The setup instructions are here: https://github.com/JaapvanEkris/openrowingmonitor/blob/main/docs/installation.md
I've made a post with basic setup instructions that might also be useful here: #148
In my case I was using a gpio lcd screen, but if you aren't, when you get to the bit in the instructions about editing config.js, just copy config.js and rowerProfiles.js from this zip into the samba share on the raspberry pi and ignore the rest of the instructions. reboot the pi and it should work and you should be able to access it from a web browser on the same wifi network at rowingmonitor.local (if that doesn't work, you might have to find its ip address and access it via that).
It's possible I've forgotten something, but hopefully this helps.

[acoolsteve]

Hello ErikNZ,

I managed to get it semi‑working by copying the values from the rowerProfiles.js file in your original post into my config.js. This got my time and distance showing numbers close to what I’m expecting, which is fantastic.

The issue I have now is that all the other data fields on http://rowingmonitor.local stay blank for about 60 seconds, and then they start displaying numbers that don’t look correct. Time and distance look great, though.

I'll look through the new files you uploaded and see if i can get things working better.

Thank you to everyone working on this project.
(I’m not a programmer/coder, so please bear with me as I learn.)