Merge tag 'pinctrl-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

 - Use flag saving spinlocks in the Renesas rzg2l driver. This fixes up
   PREEMPT_RT problems.

 - Remove broken Qualcomm PM8008 that clearly was never working. A new
   version will arrive in the next merge window.

 - Add a quirk for LP8764 regmap that was missed and made the TI J7200
   board unusable.

 - Fix persistance on the BCM2835 GPIO outputs kernel parameter so this
   remains consisten across a booted kernel.

 - Fix a potential deadlock in create_pinctrl()

 - Fix some erroneous bitfields and pinmux reset in the Rockchip RK3328
   driver.

* tag 'pinctrl-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: rockchip: fix pinmux reset in rockchip_pmx_set
  pinctrl: rockchip: use dedicated pinctrl type for RK3328
  pinctrl: rockchip: fix pinmux bits for RK3328 GPIO3-B pins
  pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins
  pinctrl: fix deadlock in create_pinctrl() when handling -EPROBE_DEFER
  pinctrl: bcm2835: Fix permissions of persist_gpio_outputs
  pinctrl: tps6594: add missing support for LP8764 PMIC
  dt-bindings: pinctrl: qcom,pmic-gpio: drop pm8008
  pinctrl: qcom: spmi-gpio: drop broken pm8008 support
  pinctrl: renesas: rzg2l: Use spin_{lock,unlock}_irq{save,restore}

Author: torvalds

Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml

@@ -29,7 +29,6 @@ properties:
           - qcom,pm7325-gpio
           - qcom,pm7550ba-gpio
           - qcom,pm8005-gpio
-          - qcom,pm8008-gpio
           - qcom,pm8018-gpio
           - qcom,pm8019-gpio
           - qcom,pm8038-gpio
@@ -126,7 +125,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,pm8008-gpio
               - qcom,pmi8950-gpio
               - qcom,pmr735d-gpio
     then:
@@ -448,7 +446,6 @@ $defs:
                  - gpio1-gpio10 for pm7325
                  - gpio1-gpio8 for pm7550ba
                  - gpio1-gpio4 for pm8005
-                 - gpio1-gpio2 for pm8008
                  - gpio1-gpio6 for pm8018
                  - gpio1-gpio12 for pm8038
                  - gpio1-gpio40 for pm8058

drivers/pinctrl/bcm/pinctrl-bcm2835.c

@@ -245,7 +245,7 @@ static const char * const irq_type_names[] = {
 };
 
 static bool persist_gpio_outputs;
-module_param(persist_gpio_outputs, bool, 0644);
+module_param(persist_gpio_outputs, bool, 0444);
 MODULE_PARM_DESC(persist_gpio_outputs, "Enable GPIO_OUT persistence when pin is freed");
 
 static inline u32 bcm2835_gpio_rd(struct bcm2835_pinctrl *pc, unsigned reg)

drivers/pinctrl/core.c

@@ -1106,8 +1106,8 @@ static struct pinctrl *create_pinctrl(struct device *dev,
 		 * an -EPROBE_DEFER later, as that is the worst case.
 		 */
 		if (ret == -EPROBE_DEFER) {
-			pinctrl_free(p, false);
 			mutex_unlock(&pinctrl_maps_mutex);
+			pinctrl_free(p, false);
 			return ERR_PTR(ret);
 		}
 	}

drivers/pinctrl/pinctrl-rockchip.c

@@ -634,23 +634,68 @@ static struct rockchip_mux_recalced_data rk3308_mux_recalced_data[] = {
 
 static struct rockchip_mux_recalced_data rk3328_mux_recalced_data[] = {
 	{
-		.num = 2,
-		.pin = 12,
-		.reg = 0x24,
-		.bit = 8,
-		.mask = 0x3
-	}, {
+		/* gpio2_b7_sel */
 		.num = 2,
 		.pin = 15,
 		.reg = 0x28,
 		.bit = 0,
 		.mask = 0x7
 	}, {
+		/* gpio2_c7_sel */
 		.num = 2,
 		.pin = 23,
 		.reg = 0x30,
 		.bit = 14,
 		.mask = 0x3
+	}, {
+		/* gpio3_b1_sel */
+		.num = 3,
+		.pin = 9,
+		.reg = 0x44,
+		.bit = 2,
+		.mask = 0x3
+	}, {
+		/* gpio3_b2_sel */
+		.num = 3,
+		.pin = 10,
+		.reg = 0x44,
+		.bit = 4,
+		.mask = 0x3
+	}, {
+		/* gpio3_b3_sel */
+		.num = 3,
+		.pin = 11,
+		.reg = 0x44,
+		.bit = 6,
+		.mask = 0x3
+	}, {
+		/* gpio3_b4_sel */
+		.num = 3,
+		.pin = 12,
+		.reg = 0x44,
+		.bit = 8,
+		.mask = 0x3
+	}, {
+		/* gpio3_b5_sel */
+		.num = 3,
+		.pin = 13,
+		.reg = 0x44,
+		.bit = 10,
+		.mask = 0x3
+	}, {
+		/* gpio3_b6_sel */
+		.num = 3,
+		.pin = 14,
+		.reg = 0x44,
+		.bit = 12,
+		.mask = 0x3
+	}, {
+		/* gpio3_b7_sel */
+		.num = 3,
+		.pin = 15,
+		.reg = 0x44,
+		.bit = 14,
+		.mask = 0x3
 	},
 };
 
@@ -2433,6 +2478,7 @@ static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
 	case RK3188:
 	case RK3288:
 	case RK3308:
+	case RK3328:
 	case RK3368:
 	case RK3399:
 	case RK3568:
@@ -2491,6 +2537,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,
 	case RK3188:
 	case RK3288:
 	case RK3308:
+	case RK3328:
 	case RK3368:
 	case RK3399:
 	case RK3568:
@@ -2704,8 +2751,10 @@ static int rockchip_pmx_set(struct pinctrl_dev *pctldev, unsigned selector,
 
 	if (ret) {
 		/* revert the already done pin settings */
-		for (cnt--; cnt >= 0; cnt--)
+		for (cnt--; cnt >= 0; cnt--) {
+			bank = pin_to_bank(info, pins[cnt]);
 			rockchip_set_mux(bank, pins[cnt] - bank->pin_base, 0);
+		}
 
 		return ret;
 	}
@@ -2753,6 +2802,7 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl,
 	case RK3188:
 	case RK3288:
 	case RK3308:
+	case RK3328:
 	case RK3368:
 	case RK3399:
 	case RK3568:
@@ -3763,7 +3813,7 @@ static struct rockchip_pin_bank rk3328_pin_banks[] = {
 	PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", 0, 0, 0, 0),
 	PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0),
 	PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0,
-			     IOMUX_WIDTH_3BIT,
+			     0,
 			     IOMUX_WIDTH_3BIT,
 			     0),
 	PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3",
@@ -3777,7 +3827,7 @@ static struct rockchip_pin_ctrl rk3328_pin_ctrl = {
 		.pin_banks		= rk3328_pin_banks,
 		.nr_banks		= ARRAY_SIZE(rk3328_pin_banks),
 		.label			= "RK3328-GPIO",
-		.type			= RK3288,
+		.type			= RK3328,
 		.grf_mux_offset		= 0x0,
 		.iomux_recalced		= rk3328_mux_recalced_data,
 		.niomux_recalced	= ARRAY_SIZE(rk3328_mux_recalced_data),

drivers/pinctrl/pinctrl-rockchip.h

@@ -193,6 +193,7 @@ enum rockchip_pinctrl_type {
 	RK3188,
 	RK3288,
 	RK3308,
+	RK3328,
 	RK3368,
 	RK3399,
 	RK3568,

drivers/pinctrl/pinctrl-tps6594.c

@@ -486,6 +486,7 @@ static int tps6594_pinctrl_probe(struct platform_device *pdev)
 		break;
 	case TPS6593:
 	case TPS6594:
+	case LP8764:
 		pctrl_desc->pins = tps6594_pins;
 		pctrl_desc->npins = ARRAY_SIZE(tps6594_pins);
 

drivers/pinctrl/qcom/pinctrl-spmi-gpio.c

@@ -1207,7 +1207,6 @@ static const struct of_device_id pmic_gpio_of_match[] = {
 	{ .compatible = "qcom,pm7325-gpio", .data = (void *) 10 },
 	{ .compatible = "qcom,pm7550ba-gpio", .data = (void *) 8},
 	{ .compatible = "qcom,pm8005-gpio", .data = (void *) 4 },
-	{ .compatible = "qcom,pm8008-gpio", .data = (void *) 2 },
 	{ .compatible = "qcom,pm8019-gpio", .data = (void *) 6 },
 	/* pm8150 has 10 GPIOs with holes on 2, 5, 7 and 8 */
 	{ .compatible = "qcom,pm8150-gpio", .data = (void *) 10 },

drivers/pinctrl/renesas/pinctrl-rzg2l.c

@@ -2071,11 +2071,11 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl)
 		 * This has to be atomically executed to protect against a concurrent
 		 * interrupt.
 		 */
-		raw_spin_lock_irqsave(&pctrl->lock.rlock, flags);
+		spin_lock_irqsave(&pctrl->lock, flags);
 		ret = rzg2l_gpio_irq_set_type(data, irqd_get_trigger_type(data));
 		if (!ret && !irqd_irq_disabled(data))
 			rzg2l_gpio_irq_enable(data);
-		raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags);
+		spin_unlock_irqrestore(&pctrl->lock, flags);
 
 		if (ret)
 			dev_crit(pctrl->dev, "Failed to set IRQ type for virq=%u\n", virq);