Update defconfig.esp32c5

Author: Jason2866

configs/defconfig.esp32c5

@@ -1,47 +1,53 @@
+#
+# Bluetooth
+#
 CONFIG_BT_ENABLED=y
-CONFIG_BT_BLE_BLUFI_ENABLE=y
+CONFIG_BT_STACK_NO_LOG=y
+# CONFIG_BT_BLE_42_FEATURES_SUPPORTED is not set
+# CONFIG_BLE_MESH is not set
+CONFIG_BT_NIMBLE_ENABLED=y
+CONFIG_BT_NIMBLE_LOG_LEVEL_NONE=y
+CONFIG_BT_NIMBLE_MAX_CONNECTIONS=1
+# CONFIG_BT_NIMBLE_NVS_PERSIST is not set
+# CONFIG_BT_NIMBLE_CRYPTO_STACK_MBEDTLS is not set
+# CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_2M_PHY is not set
+# CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_CODED_PHY is not set
+# CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT is not set
+
+CONFIG_BT_CTRL_MODEM_SLEEP=y
+CONFIG_BT_CTRL_MODEM_SLEEP_MODE_1=y
+CONFIG_BT_CTRL_LPCLK_SEL_MAIN_XTAL=y
+# CONFIG_BT_CTRL_LPCLK_SEL_RTC_SLOW is not set
+CONFIG_BT_LOG_HCI_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_BTM_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_SDP_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_GAP_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_BNEP_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_PAN_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_A2D_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_AVDT_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_AVCT_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_AVRC_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_MCA_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_HID_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_APPL_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_GATT_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_SMP_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_BTIF_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_BTC_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_OSI_TRACE_LEVEL_NONE=y
+CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_NONE=y
 CONFIG_RTC_CLK_CAL_CYCLES=576
 # CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 is not set
 CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=2304
-# This Enables RISCV LP for C6 - but it can't be used within Arduino at this time. 
+
+# This Enables RISCV LP - but it can't be used within Arduino at this time. 
 #CONFIG_ULP_COPROC_ENABLED=y
 #CONFIG_ULP_COPROC_LP_CORE=y
 #CONFIG_ULP_COPROC_RESERVE_MEM=4096
 
-#
-# OpenThread
-#
-CONFIG_OPENTHREAD_ENABLED=y
-# Border Router disabled
-# CONFIG_OPENTHREAD_BORDER_ROUTER=y
-# CONFIG_OPENTHREAD_RADIO_SPINEL_UART=y
-
-# DNS64 and NAT64 will be disabled for a while
-# OT IDF issue https://github.com/espressif/esp-idf/issues/15069
-# CONFIG_OPENTHREAD_DNS64_CLIENT=y
-
-# Radio for RPC
-# CONFIG_OPENTHREAD_RADIO=y 
-# CONFIG_OPENTHREAD_RADIO_NATIVE=y
-# CONFIG_OPENTHREAD_DIAG=n
-CONFIG_OPENTHREAD_COMMISSIONER=y
-CONFIG_OPENTHREAD_JOINER=y
-CONFIG_OPENTHREAD_CLI=y
-CONFIG_OPENTHREAD_SRP_CLIENT=y
-CONFIG_OPENTHREAD_DNS_CLIENT=y
-# Default dataset for quick start
-CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP"
-CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX="fd00:db8:a0:0::/64"
-CONFIG_OPENTHREAD_NETWORK_CHANNEL=15
-CONFIG_OPENTHREAD_NETWORK_PANID=0x1234
-CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe"
-CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff"
-CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53"
-# end of OpenThread
-
-# Matter shall use only WiFi
-CONFIG_ENABLE_MATTER_OVER_THREAD=n
-
 #
 # Zigbee
 #