Add TinyUSB driver configurations to defconfig

Added TinyUSB configurations for various drivers including CDC, MSC, HID, MIDI, VIDEO, DFU, and VENDOR.

Author: Jason2866

configs/defconfig.esp32p4

@@ -1,6 +1,7 @@
 CONFIG_IDF_EXPERIMENTAL_FEATURES=y
 
 CONFIG_NEWLIB_NANO_FORMAT=y
+CONFIG_COMPILER_FLOAT_LIB_FROM_RVFPLIB=y
 
 # Enable LP Core
 CONFIG_ULP_COPROC_ENABLED=y
@@ -10,7 +11,6 @@ CONFIG_ULP_COPROC_RESERVE_MEM=8192
 CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_360=y
 CONFIG_COMPILER_ORPHAN_SECTIONS_PLACE=y
 # CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1 is not set
-CONFIG_LWIP_TCP_SACK_OUT=y
 
 CONFIG_SPIRAM=y
 CONFIG_SPIRAM_SPEED_200M=y
@@ -30,7 +30,6 @@ CONFIG_CACHE_L2_CACHE_LINE_128B=y
 
 # RGB Display Optimizations
 CONFIG_LCD_RGB_ISR_IRAM_SAFE=y
-CONFIG_LCD_RGB_RESTART_IN_VSYNC=y
 
 CONFIG_SLAVE_IDF_TARGET_ESP32C6=y
 CONFIG_ESP_SDIO_BUS_WIDTH=4
@@ -78,8 +77,6 @@ CONFIG_LWIP_TCP_RECVMBOX_SIZE=64
 CONFIG_LWIP_UDP_RECVMBOX_SIZE=64
 CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=64
 
-CONFIG_LWIP_TCP_SACK_OUT=y
-
 #
 # Enable ESP Hosted BT
 # Used as VHCI transport between BT Host and Controller
@@ -94,3 +91,106 @@ CONFIG_LWIP_PPP_SUPPORT=y
 CONFIG_LWIP_PPP_NOTIFY_PHASE_SUPPORT=y
 CONFIG_LWIP_PPP_PAP_SUPPORT=y
 CONFIG_LWIP_PPP_ENABLE_IPV6=n
+
+#
+# Arduino TinyUSB
+#
+CONFIG_TINYUSB_ENABLED=y
+CONFIG_TINYUSB_DEBUG_LEVEL=0
+
+#
+# Serial (CDC) driver
+#
+CONFIG_TINYUSB_CDC_ENABLED=y
+CONFIG_TINYUSB_DESC_CDC_STRING="Tasmota CDC Device"
+CONFIG_TINYUSB_CDC_RX_BUFSIZE=512
+CONFIG_TINYUSB_CDC_TX_BUFSIZE=512
+CONFIG_TINYUSB_CDC_MAX_PORTS=2
+# end of Serial (CDC) driver
+
+#
+# Mass Storage (MSC) driver
+#
+CONFIG_TINYUSB_MSC_ENABLED=y
+CONFIG_TINYUSB_DESC_MSC_STRING="Tasmota MSC Device"
+CONFIG_TINYUSB_MSC_BUFSIZE=4096
+# end of Mass Storage (MSC) driver
+
+#
+# Human Interface (HID) driver
+#
+CONFIG_TINYUSB_HID_ENABLED=y
+CONFIG_TINYUSB_DESC_HID_STRING="Tasmota HID Device"
+CONFIG_TINYUSB_HID_BUFSIZE=512
+# end of Human Interface (HID) driver
+
+#
+# MIDI driver
+#
+CONFIG_TINYUSB_MIDI_ENABLED=y
+CONFIG_TINYUSB_DESC_MIDI_STRING="Tasmota MIDI Device"
+CONFIG_TINYUSB_MIDI_RX_BUFSIZE=512
+CONFIG_TINYUSB_MIDI_TX_BUFSIZE=512
+# end of MIDI driver
+
+#
+# VIDEO driver
+#
+CONFIG_TINYUSB_VIDEO_ENABLED=y
+CONFIG_TINYUSB_DESC_VIDEO_STRING="Tasmota Video Device"
+CONFIG_TINYUSB_VIDEO_STREAMING_BUFSIZE=512
+CONFIG_TINYUSB_VIDEO_STREAMING_IFS=1
+# end of VIDEO driver
+
+#
+# DFU Runtime driver
+#
+CONFIG_TINYUSB_DFU_RT_ENABLED=y
+CONFIG_TINYUSB_DESC_DFU_RT_STRING="Tasmota DFU_RT Device"
+# end of DFU Runtime driver
+
+#
+# DFU driver
+#
+CONFIG_TINYUSB_DFU_ENABLED=y
+CONFIG_TINYUSB_DESC_DFU_STRING="Tasmota DFU Device"
+CONFIG_TINYUSB_DFU_BUFSIZE=4096
+# end of DFU driver
+
+#
+# VENDOR driver
+#
+CONFIG_TINYUSB_VENDOR_ENABLED=y
+CONFIG_TINYUSB_DESC_VENDOR_STRING="Tasmota VENDOR Device"
+CONFIG_TINYUSB_VENDOR_RX_BUFSIZE=512
+CONFIG_TINYUSB_VENDOR_TX_BUFSIZE=512
+# end of VENDOR driver
+
+#
+# NCM driver
+#
+CONFIG_TINYUSB_NCM_ENABLED=y
+
+#
+# USB-OTG
+#
+CONFIG_USB_HOST_CONTROL_TRANSFER_MAX_SIZE=1024
+CONFIG_USB_HOST_HW_BUFFER_BIAS_BALANCED=y
+
+#
+# Root Port configuration
+#
+CONFIG_USB_HOST_DEBOUNCE_DELAY_MS=250
+CONFIG_USB_HOST_RESET_HOLD_MS=30
+CONFIG_USB_HOST_RESET_RECOVERY_MS=30
+CONFIG_USB_HOST_SET_ADDR_RECOVERY_MS=10
+CONFIG_USB_HOST_HUBS_SUPPORTED=y
+CONFIG_USB_HOST_HUB_MULTI_LEVEL=y
+
+#
+# Downstream Port configuration
+#
+CONFIG_USB_HOST_EXT_PORT_RESET_ATTEMPTS=1
+CONFIG_USB_HOST_EXT_PORT_RESET_RECOVERY_DELAY_MS=30
+CONFIG_USB_HOST_DWC_DMA_CAP_MEMORY_IN_PSRAM=y
+CONFIG_USB_OTG_SUPPORTED=y