Create defconfig.esp32c5

Author: Jason2866

configs/defconfig.esp32c5

@@ -0,0 +1,51 @@
+CONFIG_BT_ENABLED=y
+CONFIG_BT_BLE_BLUFI_ENABLE=y
+CONFIG_RTC_CLK_CAL_CYCLES=576
+# CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 is not set
+CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=2304
+# This Enables RISCV LP for C6 - but it can't be used within Arduino at this time. 
+#CONFIG_ULP_COPROC_ENABLED=y
+#CONFIG_ULP_COPROC_LP_CORE=y
+#CONFIG_ULP_COPROC_RESERVE_MEM=4096
+
+#
+# OpenThread
+#
+CONFIG_OPENTHREAD_ENABLED=y
+# Border Router disabled
+# CONFIG_OPENTHREAD_BORDER_ROUTER=y
+# CONFIG_OPENTHREAD_RADIO_SPINEL_UART=y
+
+# DNS64 and NAT64 will be disabled for a while
+# OT IDF issue https://github.com/espressif/esp-idf/issues/15069
+# CONFIG_OPENTHREAD_DNS64_CLIENT=y
+
+# Radio for RPC
+# CONFIG_OPENTHREAD_RADIO=y 
+# CONFIG_OPENTHREAD_RADIO_NATIVE=y
+# CONFIG_OPENTHREAD_DIAG=n
+CONFIG_OPENTHREAD_COMMISSIONER=y
+CONFIG_OPENTHREAD_JOINER=y
+CONFIG_OPENTHREAD_CLI=y
+CONFIG_OPENTHREAD_SRP_CLIENT=y
+CONFIG_OPENTHREAD_DNS_CLIENT=y
+# Default dataset for quick start
+CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP"
+CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX="fd00:db8:a0:0::/64"
+CONFIG_OPENTHREAD_NETWORK_CHANNEL=15
+CONFIG_OPENTHREAD_NETWORK_PANID=0x1234
+CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe"
+CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff"
+CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53"
+# end of OpenThread
+
+# Matter shall use only WiFi
+CONFIG_ENABLE_MATTER_OVER_THREAD=n
+
+#
+# Zigbee
+#
+CONFIG_ZB_ENABLED=y
+CONFIG_ZB_ZED=y
+CONFIG_ZB_RADIO_NATIVE=y
+# end of Zigbee