Merge pull request MicrosoftDocs#12984 from MicrosoftDocs/Terms-chrisda

Acrolinx 3

Author: chrisda

exchange/exchange-ps/ExchangePowerShell/Get-ComplianceCase.md

@@ -97,7 +97,7 @@ The CaseType parameter specifies the type of compliance case that you want to vi
 - ComplianceWorkspace: This value is reserved for internal Microsoft use.
 - DataInvestigation: Data investigation cases are used to investigate data spillage incidents. In the Microsoft Purview compliance portal, Data investigation cases are displayed on the **Data investigations** page.
 - DSR: Data Subject Request (DSR) cases are used to manage General Data Protection Regulation (GDPR) DSR investigations. In the Microsoft Purview compliance portal, DSR cases are displayed under **Data privacy** \> **Data subject requests**.
-- eDiscovery: eDiscovery (also called eDiscovery Standard) cases are used to manage legal or other types of investigations. In the Microsoft Purview compliance portal, eDiscovery Standard cases are displayed under **eDiscovery** \> **Standard**. This is the default value.
+- eDiscovery: eDiscovery (also called eDiscovery Standard) cases are used to manage legal or other types of investigations. In the Microsoft Purview compliance portal, eDiscovery Standard cases are displayed under **eDiscovery** \> **Standard**. This value is the default.
 - InsiderRisk: Insider risk cases are used to manage insider risk management cases. In the Microsoft Purview compliance portal, insider risk cases are displayed under **Insider risk management** \> **Cases**. Typically, insider risk management cases are manually created in the Microsoft Purview compliance portal to further investigate activity based on a risk alert.
 - InternalInvestigation: This value is reserved for internal Microsoft use.
 - SupervisionPolicy: This type of case corresponds to communication compliance policy. In the Microsoft Purview compliance portal, communication compliance policies are displayed under **Communication compliance** \> **Policies**.

exchange/exchange-ps/ExchangePowerShell/Get-ComplianceRetentionEventType.md

@@ -28,7 +28,7 @@ Get-ComplianceRetentionEventType [-Identity <ComplianceRuleIdParameter>]
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 
@@ -76,7 +76,7 @@ Accept wildcard characters: False
 
 The LoadTag switch specifies whether to show the compliance tags that are associated with the retention event types. You don't need to specify a value with this switch.
 
-If you don't use this switch, the ComplianceTag property will always appear empty in the results.
+If you don't use this switch, the ComplianceTag property always appears empty in the results.
 
 ```yaml
 Type: SwitchParameter

exchange/exchange-ps/ExchangePowerShell/Get-ComplianceSearch.md

@@ -13,7 +13,7 @@ title: Get-ComplianceSearch
 # Get-ComplianceSearch
 
 ## SYNOPSIS
-This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.
+This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings might be exclusive to one environment or the other.
 
 Use the Get-ComplianceSearch cmdlet to view estimate compliance searches in Exchange Server 2016 or later and in the Microsoft Purview compliance portal. After you use the New-ComplianceSearchAction cmdlet to define a preview action for the compliance search, use the Get-ComplianceSearchAction cmdlet to view the results of the compliance search.
 
@@ -30,7 +30,7 @@ Get-ComplianceSearch [[-Identity] <ComplianceSearchIdParameter>]
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 In on-premises Exchange, this cmdlet is available in the Mailbox Search role. By default, this role is assigned only to the Discovery Management role group.
 

exchange/exchange-ps/ExchangePowerShell/Get-ComplianceSearchAction.md

@@ -13,7 +13,7 @@ title: Get-ComplianceSearchAction
 # Get-ComplianceSearchAction
 
 ## SYNOPSIS
-This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.
+This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings might be exclusive to one environment or the other.
 
 Use the Get-ComplianceSearchAction cmdlet to view information about compliance search actions.
 
@@ -72,7 +72,7 @@ Get-ComplianceSearchAction [-Export]
 ## DESCRIPTION
 After you create and run a compliance search using the New-ComplianceSearch cmdlet, and start the search using the Start-ComplianceSearch cmdlet, you assign a search action using the New-ComplianceSearchAction cmdlet. You use the Get-ComplianceSearchAction cmdlet to track the progress of the compliance search action.
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 In on-premises Exchange, this cmdlet is available in the Mailbox Search role. By default, this role is assigned only to the Discovery Management role group.
 

exchange/exchange-ps/ExchangePowerShell/Get-CompromisedUserAggregateReport.md

@@ -38,7 +38,7 @@ This cmdlet returns the following information:
 - UserCount
 - Action
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-CompromisedUserDetailReport.md

@@ -38,7 +38,7 @@ This cmdlet returns the following information:
 - UserCount
 - Action
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-ConfigAnalyzerPolicyRecommendation.md

@@ -35,11 +35,11 @@ The output of this cmdlet only returns settings that fall below the value that y
 
 The output contains the following information for each setting:
 
-- PolicyGroup: The type of policy. The value will be Anti-Spam, Anti-Phishing, Anti-Malware, ATP Safe Links, or ATP Safe Attachments
+- PolicyGroup: The type of policy. The value is Anti-Spam, Anti-Phishing, Anti-Malware, ATP Safe Links, or ATP Safe Attachments
 - SettingName: The name of the setting in the policy.
 - SettingNameDescription: A description of the setting.
 - Policy: The name of the policy.
-- AppliedTo: The number of users or domains that the policy applies to. If the policy isn't applied to anyone (for example, it's disabled), this value will be blank.
+- AppliedTo: The number of users or domains that the policy applies to. If the policy isn't applied to anyone (for example, it's disabled), this value is blank.
 - CurrentConfiguration: The current value of the setting.
 - LastModified: When the policy was last modified.
 - Recommendation: The recommended Standard or Strict value for the setting.
@@ -49,7 +49,7 @@ If a setting is configured at or better than the Standard or Strict protection p
 
 This cmdlet returns the following output for each setting in each policy that falls below the recommended value.
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-Contact.md

@@ -13,7 +13,7 @@ title: Get-Contact
 # Get-Contact
 
 ## SYNOPSIS
-This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.
+This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings might be exclusive to one environment or the other.
 
 Use the Get-Contact cmdlet to view existing contact objects in your organization. This cmdlet returns contacts and mail contacts.
 
@@ -52,7 +52,7 @@ Get-Contact [[-Identity] <ContactIdParameter>]
 ## DESCRIPTION
 The Get-Contact cmdlet returns no mail-related properties for mail contacts. Use the Get-MailContact to view mail-related properties for mail contacts.
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-ContentFilterConfig.md

@@ -27,7 +27,7 @@ Get-ContentFilterConfig [-DomainController <Fqdn>]
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-ContentFilterPhrase.md

@@ -36,7 +36,7 @@ Get-ContentFilterPhrase [-Phrase <ContentFilterPhraseIdParameter>]
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES