Makefile.in

# Makefile.in generated by automake 1.18.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2025 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# File: Makefile.am, author: John Sauter, date: December 21, 2025.
#
# Build traffic_control_signals.pdf and animations.

#   Copyright © 2025 by John Sauter <John_Sauter@systemeyescomputerstore.com>

#   This program is free software: you can redistribute it and/or modify
#   it under the terms of the GNU General Public License as published by
#   the Free Software Foundation, either version 3 of the License, or
#   (at your option) any later version.

#   This program is distributed in the hope that it will be useful,
#   but WITHOUT ANY WARRANTY; without even the implied warranty of
#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#   GNU General Public License for more details.

#   You should have received a copy of the GNU General Public License
#   along with this program.  If not, see <http://www.gnu.org/licenses/>.

#   The author's contact information is as follows:
#     John Sauter
#     System Eyes Computer Store
#     20A Northwest Blvd.  Ste 345
#     Nashua, NH  03063-4066
#     telephone: (603) 424-1188
#     e-mail: John_Sauter@systemeyescomputerstore.com

VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
am__rm_f = rm -f $(am__rm_f_notfound)
am__rm_rf = rm -rf $(am__rm_f_notfound)
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(dist_check_SCRIPTS) $(dist_check_DATA) \
	$(dist_doc_DATA) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
  || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
       $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
  }
am__installdirs = "$(DESTDIR)$(docdir)"
DATA = $(dist_doc_DATA)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__tty_colors_dummy = \
  mgn= red= grn= lgn= blu= brg= std=; \
  am__color_tests=no
am__tty_colors = { \
  $(am__tty_colors_dummy); \
  if test "X$(AM_COLOR_TESTS)" = Xno; then \
    am__color_tests=no; \
  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
    am__color_tests=yes; \
  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
    am__color_tests=yes; \
  fi; \
  if test $$am__color_tests = yes; then \
    red=''; \
    grn=''; \
    lgn=''; \
    blu=''; \
    mgn=''; \
    brg=''; \
    std=''; \
  fi; \
}
am__recheck_rx = ^[ 	]*:recheck:[ 	]*
am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
  recheck = 1; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
        { \
          if ((getline line2 < ($$0 ".log")) < 0) \
	    recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
        { \
          recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
        { \
          break; \
        } \
    }; \
  if (recheck) \
    print $$0; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
  print "fatal: making $@: " msg | "cat >&2"; \
  exit 1; \
} \
function rst_section(header) \
{ \
  print header; \
  len = length(header); \
  for (i = 1; i <= len; i = i + 1) \
    printf "="; \
  printf "\n\n"; \
} \
{ \
  copy_in_global_log = 1; \
  global_test_result = "RUN"; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
         fatal("failed to read from " $$0 ".trs"); \
      if (line ~ /$(am__global_test_result_rx)/) \
        { \
          sub("$(am__global_test_result_rx)", "", line); \
          sub("[ 	]*$$", "", line); \
          global_test_result = line; \
        } \
      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
        copy_in_global_log = 0; \
    }; \
  if (copy_in_global_log) \
    { \
      rst_section(global_test_result ": " $$0); \
      while ((rc = (getline line < ($$0 ".log"))) != 0) \
      { \
        if (rc < 0) \
          fatal("failed to read from " $$0 ".log"); \
        print line; \
      }; \
      printf "\n"; \
    }; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
  --color-tests "$$am__color_tests" \
  $$am__collect_skipped_logs \
  --enable-hard-errors "$$am__enable_hard_errors" \
  --expect-failure "$$am__expect_failure"
# To be inserted before the command running the test.  Creates the
# directory for the log if needed.  Stores in $dir the directory
# containing $f, in $tst the test, in $log the log.  Executes the
# developer-defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup);					\
$(am__vpath_adj_setup) $(am__vpath_adj)			\
$(am__tty_colors);					\
srcdir=$(srcdir); export srcdir;			\
case "$@" in						\
  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
    *) am__odir=.;; 					\
esac;							\
test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
if test -f "./$$f"; then dir=./;			\
elif test -f "$$f"; then dir=;				\
else dir="$(srcdir)/"; fi;				\
tst=$$dir$$f; log='$@'; 				\
if test -n '$(IGNORE_SKIPPED_LOGS)'; then		\
  am__collect_skipped_logs='--collect-skipped-logs no';	\
else							\
  am__collect_skipped_logs='';				\
fi;							\
if test -n '$(DISABLE_HARD_ERRORS)'; then		\
  am__enable_hard_errors=no; 				\
else							\
  am__enable_hard_errors=yes; 				\
fi; 							\
case " $(XFAIL_TESTS) " in				\
  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
    am__expect_failure=yes;;				\
  *)							\
    am__expect_failure=no;;				\
esac; 							\
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed).  The result is saved in the shell variable
# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
  bases='$(TEST_LOGS)'; \
  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
  bases=`echo $$bases`
AM_TESTSUITE_SUMMARY_HEADER = ' for $(PACKAGE_STRING)'
RECHECK_LOGS = $(TEST_LOGS)
AM_RECURSIVE_TARGETS = check recheck
TEST_SUITE_LOG = test-suite.log
TEST_EXTENSIONS = .test
LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
  case '$@' in \
    */*) \
      case '$*' in \
        */*) b='$*';; \
          *) b=`echo '$@' | sed 's/\.log$$//'`; \
       esac;; \
    *) \
      b='$*';; \
  esac
am__test_logs1 = $(TESTS:=.log)
TEST_LOGS = $(am__test_logs1:.test.log=.log)
TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
	$(TEST_LOG_FLAGS)
am__DIST_COMMON = $(srcdir)/Makefile.in AUTHORS COPYING ChangeLog \
	INSTALL NEWS README install-sh missing test-driver
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -700 -exec chmod u+rwx {} ';' \
      ; rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = -9
DIST_TARGETS = dist-gzip
# Exists only to be overridden by the user if desired.
AM_DISTCHECK_DVI_TARGET = dvi
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = \
  find . \( -type f -a \! \
            \( -name .nfs* -o -name .smb* -o -name .__afs* \) \) -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
ETAGS = @ETAGS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
am__leading_dot = @am__leading_dot@
am__rm_f_notfound = @am__rm_f_notfound@
am__tar = @am__tar@
am__untar = @am__untar@
am__xargs_n = @am__xargs_n@
bindir = @bindir@
build_alias = @build_alias@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@

# Include the following documentation files in the distribution.
dist_doc_DATA = \
	README \
	COPYING \
	LICENSE \
	AUTHORS \
	ChangeLog \
	INSTALL \
	NEWS


# Also distribute these files, used to build the PDF.

# These files are used by the renderer.

# Distribute the shell scripts which build the RPMs and the video animations.

# The spec file is ueed to build RPMs for RPM-based distributions
# of GNU/Linux.
EXTRA_DIST = signal_ccc.svg signal_ccu.svg signal_rrr.svg \
	signal_cccl.svg signal_llll.svg fix_files.sh autogen.sh \
	left_turn_script.txt left_turn_delayed_script.txt \
	legalcode.txt multiple_script.txt \
	MUTCD_Ped_Signal_-_Hand_with_timer.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-00.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-01.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-02.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-03.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-04.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-05.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-06.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-07.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-08.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-09.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-10.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-11.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-12.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-13.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-14.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-15.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-16.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-17.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-18.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-19.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-20.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-21.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-22.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-23.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-24.svg \
	MUTCD_Ped_Signal_-_Hand_with_timer-25.svg \
	MUTCD_Ped_Signal_-_Steady_hand.svg MUTCD_Ped_Signal_-_Walk.svg \
	pedestrian_and_left_turn_script.txt pedestrian_script.txt \
	references.bib define_traffic_control_signals.py \
	display_traffic_control_signals.py \
	define_complex_intersection.py define_one_way_bridge.py \
	bridge_one_car_script.txt bridge_two_cars_script.txt \
	four_corners_many_script.txt define_four_corners.py \
	display_intersection.py simulate_traffic.py draw_background.py \
	smooth_travel_paths.py traffic_control_signals.tex \
	state_diagram.txt signal_ccc_Green.svg signal_ccc_Red.svg \
	signal_ccc_Yellow.svg signal_ccu_Green.svg signal_ccu_Red.svg \
	signal_ccu_Yellow.svg signal_Dark_3.svg signal_Dark_4.svg \
	signal_cccl_Green.svg signal_cccl_Red.svg \
	signal_cccl_Yellow.svg signal_llll_Flashing_Yellow.svg \
	signal_llll_Green.svg signal_llll_Red.svg \
	signal_llll_Yellow.svg signal_rrr_Green.svg signal_rrr_Red.svg \
	signal_rrr_Yellow.svg car-38800411-right.svg \
	car-38800411-up.svg truck-51893967-up.svg \
	truck-51893967-right.svg man_walking_right.svg \
	process_events.py build_RPMs.sh build_animation.sh \
	build_animation_serial.sh render_animation.sh build_video.sh \
	How_Traffic_Control_Signals_Work.spec

# Support make check and make distcheck
dist_check_DATA = check_expected_output.txt left_turn_script.txt
dist_check_SCRIPTS = verify_files_template.sh
TESTS = verify_files.sh

# When removing files, also remove the followins:
CLEANFILES = \
_minted-traffic_control_signals \
svg-inkscape \
traffic_control_signals.aux \
traffic_control_signals.bbl \
traffic_control_signals.blg \
traffic_control_signals.brf \
traffic_control_signals.log \
traffic_control_signals.out \
traffic_control_signals.pdf \
state_diagram.eps \
state_diagram-eps-converted-to.pdf \
finite_state_machine.json \
complex_intersection.json \
one_way_bridge.json \
four_corners.json \
complex_intersection_unsmoothed.json \
one_way_bridge_unsmoothed.json \
four_corners_unsmoothed.json \
red_state_table.tex \
green_state_table.tex \
yellow_state_table.tex \
lamp_map_names_*.tex\
sensor_map_*.tex \
timer_durations_*.tex \
MUTCD_Ped_Signal_-_Hand_with_timer*.pdf \
MUTCD_Ped_Signal_-_Steady_hand.pdf \
MUTCD_Ped_Signal_-_Walk.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer*.png \
MUTCD_Ped_Signal_-_Steady_hand.png \
MUTCD_Ped_Signal_-_Walk.png \
signal_*.pdf \
signal_*.png \
car-38800411-right.png \
car-38800411-up.png \
truck-51893967-right.png \
truck-51893967-up.png \
pedestrian.png \
man_walking_right.png \
background_*.png \
*_table.tex \
*_animation_*.csv \
*_animation_*.mkv \
*_animation_*.pdf \
last_event_time_*_animation.txt \
check_output.txt \
verify_files.sh \
files.txt \
frames_of_*_animation.txt \
*trace.txt 

all: all-am

.SUFFIXES:
.SUFFIXES: .log .test .trs
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
install-dist_docDATA: $(dist_doc_DATA)
	@$(NORMAL_INSTALL)
	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
	done

uninstall-dist_docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
tags TAGS:

ctags CTAGS:

cscope cscopelist:


# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
	rm -f $< $@
	$(MAKE) $(AM_MAKEFLAGS) $<

# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
	@:
$(TEST_SUITE_LOG): $(TEST_LOGS)
	@$(am__set_TESTS_bases); \
	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
	redo_bases=`for i in $$bases; do \
	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
	            done`; \
	if test -n "$$redo_bases"; then \
	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
	  if $(am__make_dryrun); then :; else \
	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
	  fi; \
	fi; \
	if test -n "$$am__remaking_logs"; then \
	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
	       "recursion detected" >&2; \
	elif test -n "$$redo_logs"; then \
	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
	fi; \
	if $(am__make_dryrun); then :; else \
	  st=0;  \
	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
	  for i in $$redo_bases; do \
	    test -f $$i.trs && test -r $$i.trs \
	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
	    test -f $$i.log && test -r $$i.log \
	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
	  done; \
	  test $$st -eq 0 || exit 1; \
	fi
	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
	ws='[ 	]'; \
	results=`for b in $$bases; do echo $$b.trs; done`; \
	test -n "$$results" || results=/dev/null; \
	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
	  success=true; \
	else \
	  success=false; \
	fi; \
	br='==================='; br=$$br$$br$$br$$br; \
	result_count () \
	{ \
	    if test x"$$1" = x"--maybe-color"; then \
	      maybe_colorize=yes; \
	    elif test x"$$1" = x"--no-color"; then \
	      maybe_colorize=no; \
	    else \
	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
	    fi; \
	    shift; \
	    desc=$$1 count=$$2; \
	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
	      color_start=$$3 color_end=$$std; \
	    else \
	      color_start= color_end=; \
	    fi; \
	    echo "$${color_start}# $$desc $$count$${color_end}"; \
	}; \
	create_testsuite_report () \
	{ \
	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
	  result_count $$1 "PASS: " $$pass  "$$grn"; \
	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
	  result_count $$1 "FAIL: " $$fail  "$$red"; \
	  result_count $$1 "XPASS:" $$xpass "$$red"; \
	  result_count $$1 "ERROR:" $$error "$$mgn"; \
	}; \
	output_system_information () \
	{ \
          echo;                                     \
	  { uname -a | $(AWK) '{                    \
  printf "System information (uname -a):";          \
  for (i = 1; i < NF; ++i)                          \
    {                                               \
      if (i != 2)                                   \
        printf " %s", $$i;                          \
    }                                               \
  printf "\n";                                      \
}'; } 2>&1;                                         \
	  if test -r /etc/os-release; then          \
	    echo "Distribution information (/etc/os-release):"; \
	    sed 8q /etc/os-release;                 \
	  elif test -r /etc/issue; then             \
	    echo "Distribution information (/etc/issue):";      \
	    cat /etc/issue;                         \
	  fi;                                       \
	}; \
	please_report () \
	{ \
echo "Some test(s) failed.  Please report this to $(PACKAGE_BUGREPORT),";    \
echo "together with the test-suite.log file (gzipped) and your system";      \
echo "information.  Thanks.";                                                \
	}; \
	{								\
	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
	    $(am__rst_title);						\
	  create_testsuite_report --no-color;				\
	  output_system_information;                                    \
	  echo;								\
	  echo ".. contents:: :depth: 2";				\
	  echo;								\
	  for b in $$bases; do echo $$b; done				\
	    | $(am__create_global_log);					\
	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
	if $$success; then						\
	  col="$$grn";							\
	 else								\
	  col="$$red";							\
	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
	fi;								\
	echo "$${col}$$br$${std}"; 					\
	echo "$${col}Testsuite summary"$(AM_TESTSUITE_SUMMARY_HEADER)"$${std}";	\
	echo "$${col}$$br$${std}"; 					\
	create_testsuite_report --maybe-color;				\
	echo "$$col$$br$$std";						\
	if $$success; then :; else					\
	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG) for debugging.$${std}";\
	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
	    please_report | sed -e "s/^/$${col}/" -e s/'$$'/"$${std}"/; \
	  fi;								\
	  echo "$$col$$br$$std";					\
	fi;								\
	$$success || exit 1

check-TESTS: $(dist_check_SCRIPTS) $(dist_check_DATA)
	@$(am__rm_f) $(RECHECK_LOGS)
	@$(am__rm_f) $(RECHECK_LOGS:.log=.trs)
	@$(am__rm_f) $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	log_list=`echo $$log_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
	exit $$?;
recheck: all $(dist_check_SCRIPTS) $(dist_check_DATA)
	@$(am__rm_f) $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	bases=`for i in $$bases; do echo $$i; done \
	         | $(am__list_recheck_tests)` || exit 1; \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	log_list=`echo $$log_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
	        am__force_recheck=am--force-recheck \
	        TEST_LOGS="$$log_list"; \
	exit $$?
verify_files.sh.log: verify_files.sh
	@p='verify_files.sh'; \
	b='verify_files.sh'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
.test.log:
	@p='$<'; \
	$(am__set_b); \
	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)

distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	$(am__remove_distdir)
	$(AM_V_at)$(MKDIR_P) "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
	$(am__post_remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-bzip3: distdir
	tardir=$(distdir) && $(am__tar) | bzip3 -c >$(distdir).tar.bz3
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-zstd: distdir
	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  eval GZIP= gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.bz3*) \
	  bzip3 -dc $(distdir).tar.bz3 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  eval GZIP= gzip -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	*.tar.zst*) \
	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(dist_check_SCRIPTS) \
	  $(dist_check_DATA)
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(docdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-$(am__rm_f) $(TEST_LOGS)
	-$(am__rm_f) $(TEST_LOGS:.log=.trs)
	-$(am__rm_f) $(TEST_SUITE_LOG)

clean-generic:
	-$(am__rm_f) $(CLEANFILES)

distclean-generic:
	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-local mostlyclean-am

distclean: distclean-am
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-dist_docDATA

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

pdf: pdf-am

pdf-am: pdf-local

ps: ps-am

ps-am:

uninstall-am: uninstall-dist_docDATA

.MAKE: check-am install-am install-strip

.PHONY: all all-am am--refresh check check-TESTS check-am clean \
	clean-generic clean-local cscopelist-am ctags-am dist dist-all \
	dist-bzip2 dist-bzip3 dist-gzip dist-lzip dist-shar dist-tarZ \
	dist-xz dist-zip dist-zstd distcheck distclean \
	distclean-generic distcleancheck distdir distuninstallcheck \
	dvi dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dist_docDATA install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic pdf pdf-am pdf-local ps ps-am recheck \
	tags-am uninstall uninstall-am uninstall-dist_docDATA

.PRECIOUS: Makefile


# The main target is the file traffic_control_signals.pdf
all: traffic_control_signals.pdf
.PHONEY: all

# Inkscape fails if many copies are run in parallel.
.NOTPARALLEL:

# Build the RPM if the developer types "make RPMs".
.phoney: RPMs
RPMs:
	bash build_RPMs.sh

# Building the PDF depends on the bbl file, which is built below.
# When the bbl file is available, run LaTeX four times to be sure
# the forward references are resolved and the pdf byte count is correct.
# There is a slight chance that this process will be unstable,
# with the size of a reference changing the pagination, thus changing
# the size of a reference to that page.
# Perhaps someday we will check that this is not happening
# by verifying that the size of the last and next-to-last runs match.
traffic_control_signals.pdf : traffic_control_signals.tex \
traffic_control_signals.bbl LICENSE legalcode.txt \
state_diagram.eps red_state_table.tex \
green_state_table.tex yellow_state_table.tex \
lamp_map_names_01.tex lamp_map_names_02.tex lamp_map_names_03.tex \
sensor_map_01.tex sensor_map_02.tex sensor_map_03.tex \
timer_durations_01.tex timer_durations_02.tex timer_durations_03.tex \
idle_01_table.tex idle_03_table.tex left_turn_table.tex \
left_turn_delayed_table.tex \
pedestrian_table.tex pedestrian_and_left_turn_table.tex multiple_table.tex \
MUTCD_Ped_Signal_-_Hand_with_timer.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-00.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-01.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-02.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-03.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-04.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-05.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-06.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-07.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-08.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-09.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-10.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-11.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-12.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-13.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-14.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-15.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-16.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-17.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-18.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-19.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-20.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-21.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-22.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-23.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-24.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-25.pdf \
MUTCD_Ped_Signal_-_Steady_hand.pdf \
MUTCD_Ped_Signal_-_Walk.pdf signal_ccc.pdf signal_ccu.pdf signal_rrr.pdf \
signal_cccl.pdf signal_llll.pdf background_01.png background_02.png \
background_03.png \
bridge_one_car_animation_01.mkv bridge_one_car_table.tex \
bridge_two_cars_animation_01.mkv bridge_two_cars_table.tex \
four_corners_many_animation_02.mkv four_corners_many_table.tex \
pedestrian_and_left_turn_animation_03.mkv pedestrian_and_left_turn_table.tex \
multiple_animation_03.mkv multiple_table.tex  
	TEXINPUTS=${TEXINPUTS}:${builddir}:${srcdir} lualatex \
--draftmode -draftmode -shell-escape ${srcdir}/traffic_control_signals.tex
	TEXINPUTS=${TEXINPUTS}:${builddir}:${srcdir} lualatex \
--draftmode -draftmode -shell-escape ${srcdir}/traffic_control_signals.tex
	TEXINPUTS=${TEXINPUTS}:${builddir}:${srcdir} lualatex \
--draftmode -draftmode -shell-escape ${srcdir}/traffic_control_signals.tex
	TEXINPUTS=${TEXINPUTS}:${builddir}:${srcdir} lualatex \
-shell-escape "${srcdir}/traffic_control_signals.tex"

# Build the bbl file by running LaTeX without it, then running bibtex.
traffic_control_signals.bbl : traffic_control_signals.tex references.bib \
LICENSE legalcode.txt state_diagram.eps \
red_state_table.tex green_state_table.tex yellow_state_table.tex \
lamp_map_names_01.tex lamp_map_names_02.tex lamp_map_names_03.tex \
sensor_map_01.tex sensor_map_02.tex sensor_map_03.tex \
timer_durations_01.tex timer_durations_02.tex timer_durations_03.tex \
idle_01_table.tex idle_03_table.tex left_turn_table.tex \
left_turn_delayed_table.tex \
pedestrian_table.tex pedestrian_and_left_turn_table.tex multiple_table.tex \
MUTCD_Ped_Signal_-_Hand_with_timer.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-00.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-01.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-02.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-03.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-04.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-05.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-06.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-07.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-08.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-09.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-10.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-11.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-12.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-13.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-14.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-15.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-16.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-17.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-18.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-19.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-20.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-21.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-22.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-23.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-24.pdf \
MUTCD_Ped_Signal_-_Hand_with_timer-25.pdf \
MUTCD_Ped_Signal_-_Steady_hand.pdf \
MUTCD_Ped_Signal_-_Walk.pdf signal_ccc.pdf signal_ccu.pdf signal_rrr.pdf \
signal_cccl.pdf signal_llll.pdf background_01.png background_02.png \
background_03.png \
bridge_one_car_animation_01.mkv bridge_one_car_table.tex \
bridge_two_cars_animation_01.mkv bridge_two_cars_table.tex \
four_corners_many_animation_02.mkv four_corners_many_table.tex \
pedestrian_and_left_turn_animation_03.mkv pedestrian_and_left_turn_table.tex \
multiple_animation_03.mkv multiple_table.tex 
	echo " " >"${builddir}/traffic_control_signals.bbl"
	TEXINPUTS=${TEXINPUTS}:${builddir}:${srcdir} lualatex \
--draftmode -draftmode -shell-escape "${srcdir}/traffic_control_signals.tex"
	BIBINPUTS=${TEXINPUTS}:${builddir}:${srcdir} bibtex \
"${builddir}/traffic_control_signals.aux"

# Build a chart of the important states of the finite state machines.
state_diagram.eps : state_diagram.txt
	neato -Teps "${srcdir}/state_diagram.txt" \
-o "${builddir}/state_diagram.eps"

# Create a JSON file which describes the finite state machine template.
finite_state_machine.json : define_traffic_control_signals.py
	python3 "${srcdir}/define_traffic_control_signals.py" \
--output="${builddir}/finite_state_machine.json"

# Generate the state tables from the implementation's finite state machine.
red_state_table.tex : display_traffic_control_signals.py \
finite_state_machine.json
	python3 "${srcdir}/display_traffic_control_signals.py" \
--input="${builddir}/finite_state_machine.json" \
--red="${builddir}/red_state_table.tex"

yellow_state_table.tex : display_traffic_control_signals.py \
finite_state_machine.json
	python3 "${srcdir}/display_traffic_control_signals.py" \
--input="${builddir}/finite_state_machine.json" \
--yellow="${builddir}/yellow_state_table.tex"

green_state_table.tex : display_traffic_control_signals.py \
finite_state_machine.json
	python3 "${srcdir}/display_traffic_control_signals.py" \
--input="${builddir}/finite_state_machine.json" \
--green="${builddir}/green_state_table.tex"

# Create a JSON file which describes the one-way bridge example.
one_way_bridge.json : define_one_way_bridge.py \
finite_state_machine.json smooth_travel_paths.py
	python3 "${srcdir}/define_one_way_bridge.py" \
--input="${builddir}/finite_state_machine.json" \
--output="${builddir}/one_way_bridge_unsmoothed.json"
	python3 "${srcdir}/smooth_travel_paths.py" \
"${builddir}/one_way_bridge_unsmoothed.json" \
"${builddir}/one_way_bridge.json"

# Create a JSON file which describes the four corners example.
four_corners.json : define_four_corners.py \
finite_state_machine.json smooth_travel_paths.py
	python3 "${srcdir}/define_four_corners.py" \
--input="${builddir}/finite_state_machine.json" \
--output="${builddir}/four_corners_unsmoothed.json"
	python3 "${srcdir}/smooth_travel_paths.py" \
"${builddir}/four_corners_unsmoothed.json" \
"${builddir}/four_corners.json"

# Create a JSON file which describes the complex intersection example.
complex_intersection.json : define_complex_intersection.py \
finite_state_machine.json smooth_travel_paths.py
	python3 "${srcdir}/define_complex_intersection.py" \
--input="${builddir}/finite_state_machine.json" \
--output="${builddir}/complex_intersection_unsmoothed.json"
	python3 "${srcdir}/smooth_travel_paths.py" \
"${builddir}/complex_intersection_unsmoothed.json" \
"${builddir}/complex_intersection.json"

lamp_map_names_01.tex : display_intersection.py one_way_bridge.json
	python3 "${srcdir}/display_intersection.py" \
"${builddir}/one_way_bridge.json" \
--table-label "lamp_map_01" \
--lamp-map="${builddir}/lamp_map_names_01.tex" 

lamp_map_names_02.tex : display_intersection.py four_corners.json
	python3 "${srcdir}/display_intersection.py" \
"${builddir}/four_corners.json" \
--table-label "lamp_map_02" \
--lamp-map="${builddir}/lamp_map_names_02.tex" 

lamp_map_names_03.tex : display_intersection.py complex_intersection.json
	python3 "${srcdir}/display_intersection.py" \
"${builddir}/complex_intersection.json" \
--table-label "lamp_map_03" \
--lamp-map="${builddir}/lamp_map_names_03.tex" 

sensor_map_01.tex : display_intersection.py one_way_bridge.json
	python3 "${srcdir}/display_intersection.py" \
"${builddir}/one_way_bridge.json"  \
--table-label "sensor_map_01" --only-important \
--sensor-map="${builddir}/sensor_map_01.tex"

sensor_map_02.tex : display_intersection.py four_corners.json
	python3 "${srcdir}/display_intersection.py" \
"${builddir}/four_corners.json"  \
--table-label "sensor_map_02" --only-important \
--sensor-map="${builddir}/sensor_map_02.tex" 

sensor_map_03.tex : display_intersection.py complex_intersection.json
	python3 "${srcdir}/display_intersection.py" \
"${builddir}/complex_intersection.json"  \
--table-label "sensor_map_03" \
--sensor-map="${builddir}/sensor_map_03.tex" 

timer_durations_01.tex : display_intersection.py one_way_bridge.json
	python3 "${srcdir}/display_intersection.py" \
"${builddir}/one_way_bridge.json"  \
--table-label "timer_duratons_01" --only-important \
--timer-durations="${builddir}/timer_durations_01.tex" 

timer_durations_02.tex : display_intersection.py four_corners.json
	python3 "${srcdir}/display_intersection.py" \
"${builddir}/four_corners.json" \
--table-label "timer_durations_02" --only-important \
--timer-durations="${builddir}/timer_durations_02.tex" 

timer_durations_03.tex : display_intersection.py complex_intersection.json
	python3 "${srcdir}/display_intersection.py" \
"${builddir}/complex_intersection.json"  \
--table-label "timer_durations_03" \
--timer-durations="${builddir}/timer_durations_03.tex" 

# Generate the table files which detail the operation of the
# finite state machines for the various scenarios.  In case
# we wish to show an animation also create the events csv file
# and the last events time files that the animation renderer needs.
idle_01_table.tex : simulate_traffic.py one_way_bridge.json
	python3 "${srcdir}/simulate_traffic.py" \
--intersection "${builddir}/one_way_bridge.json" --clock-step 0.001 \
--explain-state-transitions --only-important \
--table-level 4 --table-file "${builddir}/idle_01_table.tex" --duration 200  \
--table-caption "Power On to Idle Condition, example 01"

idle_03_table.tex : simulate_traffic.py complex_intersection.json
	python3 "${srcdir}/simulate_traffic.py" \
--intersection "${builddir}/complex_intersection.json" --clock-step 0.001 \
--explain-state-transitions --show-substates \
--table-level 4 --table-file "${builddir}/idle_03_table.tex" --duration 200  \
--table-caption "Power On to Idle Condition, example 03"

bridge_one_car_table.tex bridge_one_car_animation_01.csv &: \
simulate_traffic.py one_way_bridge.json bridge_one_car_script.txt
	python3 "${srcdir}/simulate_traffic.py" \
--intersection "${builddir}/one_way_bridge.json" --clock-step 0.001 \
--table-level 4 --table-file "${builddir}/bridge_one_car_table.tex" \
--duration 400 \
--explain-state-transitions --only-important \
--table-start 199 --script "${srcdir}/bridge_one_car_script.txt" \
--events-file "$(builddir)/bridge_one_car_animation_01.csv" \
--last-event-time "${builddir}/last_event_time_bridge_one_car_animation.txt" \
--table-caption "One Car Passes Over the Single-lane Bridge"

bridge_two_cars_table.tex bridge_two_cars_animation_01.csv &: \
simulate_traffic.py one_way_bridge.json bridge_two_cars_script.txt
	python3 "${srcdir}/simulate_traffic.py" \
--intersection "${builddir}/one_way_bridge.json" --clock-step 0.001 \
--table-level 4 --table-file "${builddir}/bridge_two_cars_table.tex" \
--duration 400 \
--explain-state-transitions --only-important \
--table-start 199 --script "${srcdir}/bridge_two_cars_script.txt" \
--events-file "$(builddir)/bridge_two_cars_animation_01.csv" \
--last-event-time "${builddir}/last_event_time_bridge_two_cars_animation.txt" \
--table-caption "Two Cars Pass Over the Single-lane Bridge"

four_corners_many_table.tex four_corners_many_animation_02.csv &: \
simulate_traffic.py four_corners.json four_corners_many_script.txt
	python3 "${srcdir}/simulate_traffic.py" \
--intersection "${builddir}/four_corners.json" --clock-step 0.001 \
--table-level 4 --table-file "${builddir}/four_corners_many_table.tex" \
--duration 400 --explain-state-transitions --only-important \
--table-start 199 --script "${srcdir}/four_corners_many_script.txt" \
--events-file "$(builddir)/four_corners_many_animation_02.csv" \
--last-event-time \
"${builddir}/last_event_time_four_corners_many_animation.txt" \
--table-caption "Traffic from All Directions"

left_turn_delayed_table.tex left_turn_delayed_animation_03.csv &: \
simulate_traffic.py complex_intersection.json  \
left_turn_delayed_script.txt
	python3 "${srcdir}/simulate_traffic.py" \
--intersection "${builddir}/complex_intersection.json" --clock-step 0.001 \
--table-level 4 --table-file "${builddir}/left_turn_delayed_table.tex" \
--events-file "$(builddir)/left_turn_delayed_animation_03.csv" \
--last-event-time \
"${builddir}/last_event_time_left_turn_delayed_animation.txt" \
--duration 400 --table-start 199 --explain-state-transitions --show-substates \
--script "${srcdir}/left_turn_delayed_script.txt" \
--table-caption "Left Turn Delayed"

left_turn_table.tex left_turn_animation_03.csv &: \
simulate_traffic.py complex_intersection.json  \
left_turn_script.txt
	python3 "${srcdir}/simulate_traffic.py" \
--intersection "${builddir}/complex_intersection.json" --clock-step 0.001 \
--table-level 4 --table-file "${builddir}/left_turn_table.tex" \
--events-file "$(builddir)/left_turn_animation_03.csv" \
--last-event-time \
"${builddir}/last_event_time_left_turn_animation.txt" \
--duration 400 --table-start 199 --explain-state-transitions --show-substates \
--script "${srcdir}/left_turn_script.txt" \
--table-caption "Left Turn"

pedestrian_table.tex pedestrian_animation_03.csv &: simulate_traffic.py \
complex_intersection.json pedestrian_script.txt
	python3 "${srcdir}/simulate_traffic.py" \
--intersection "${builddir}/complex_intersection.json" --table-level 4 \
--table-file "${builddir}/pedestrian_table.tex" --duration 400 \
--events-file "$(builddir)/pedestrian_animation_03.csv" \
--last-event-time "${builddir}/last_event_time_pedestrian_animation.txt" \
--clock-step 0.001 --explain-state-transitions --show-substates \
--table-start 199 --script "${srcdir}/pedestrian_script.txt" \
--table-caption "Pedestrian Crosses"

pedestrian_and_left_turn_table.tex \
pedestrian_and_left_turn_animation_03.csv &: simulate_traffic.py \
complex_intersection.json pedestrian_and_left_turn_script.txt
	python3 "${srcdir}/simulate_traffic.py" \
--intersection "${builddir}/complex_intersection.json" --table-level 4 \
--table-file "${builddir}/pedestrian_and_left_turn_table.tex" --duration 400 \
--events-file "$(builddir)/pedestrian_and_left_turn_animation_03.csv" \
--last-event-time \
"${builddir}/last_event_time_pedestrian_and_left_turn_animation.txt" \
--clock-step 0.001 --explain-state-transitions --show-substates \
--table-start 199 --script "${srcdir}/pedestrian_and_left_turn_script.txt" \
--table-caption "Pedestrian then Left Turn"

multiple_table.tex multiple_animation_03.csv &: simulate_traffic.py \
complex_intersection.json multiple_script.txt
	python3 "${srcdir}/simulate_traffic.py" \
--intersection "${builddir}/complex_intersection.json" \
--table-level 2 --clock-step 0.001 \
--explain-state-transitions --show-substates \
--events-file "$(builddir)/multiple_animation_03.csv" \
--last-event-time "${builddir}/last_event_time_multiple_animation.txt" \
--table-file "${builddir}/multiple_table.tex" --duration 400 \
--table-start 199 --script "${srcdir}/multiple_script.txt" \
--table-caption "Multiple Arrivals"

# Some of the pictures have been created in inkscape.  Convert them
# to PDF files for the document or to png files for the renderer.

%.pdf : %.svg ; inkscape --export-type=pdf --export-dpi=4800 \
"${srcdir}/$(<F)" -o "${builddir}/$(@F)"

%.png : %.svg ; inkscape --export-type=png --export-png-color-mode=RGBA_16 \
--export-dpi=4800 "${srcdir}/$(<F)" -o "${builddir}/$(@F)"

# Buld the PDF on demand, if requested.
pdf-local: traffic_control_signals.pdf
.PHONEY: pdf-local

# Include the PGP signature file in the repository.  Create it using
# "make signature".
signature : ${PACKAGE}-${VERSION}.tar.gz.asc
.PHONEY: signature

${PACKAGE}-${VERSION}.tar.gz.asc : ${PACKAGE}-${VERSION}.tar.gz
	rm -f ${PACKAGE}-*.tar.gz.asc
	gpg2 --detach-sign --armor ${PACKAGE}-${VERSION}.tar.gz
verify_files.sh : verify_files_template.sh check_output.txt 
	cp "$(srcdir)/verify_files_template.sh" verify_files.sh
	if [ ! -r "check_expected_output.txt" ] ; then cp "$(srcdir)/check_expected_output.txt" check_expected_output.txt ; touch copied_from_srcdir ; fi
	chmod +x verify_files.sh

check_output.txt : simulate_traffic.py complex_intersection.json \
left_turn_script.txt
	python3 "${srcdir}/simulate_traffic.py" \
--intersection "${builddir}/complex_intersection.json" \
--script "${srcdir}/left_turn_script.txt" --clock-step 0.001 \
--explain-state-transitions --show-substates \
--duration 1200 --verbose 2 | tee "${builddir}/check_output.txt"

# Animations illustrate a scenario.  The csv file describes where each
# object is located with the passage of time.
# When building an animation, indicate which example intersection the
# script applies to by following the name of the script with "animation_01"
# for the one-way bridge example, "animation_02" for the four corners example,
# and "animation_03" for the complex intersection example.
#
# Some of the animation CSV files are produced as a byproduct of creating
# the corresponding events table.  The following CSV rules are for those
# that aren't.  The table files are for debugging.
%_animation_01.csv : %_script.txt simulate_traffic.py one_way_bridge.json
	python3 "${srcdir}/simulate_traffic.py" \
--intersection "${builddir}/one_way_bridge.json" --clock-step 0.001 \
--script "$<" --duration 1200 --events-file "$@" --flush-table-file \
--table-level 4 --table-file "${builddir}/$(*F)_table.tex"  \
--table-caption "$(*F) events" --show-substates --explain-state-transitions \
--last-event-time "${builddir}/last_event_time_$(*F)_animation.txt"

%_animation_02.csv : %_script.txt simulate_traffic.py four_corners.json
	python3 "${srcdir}/simulate_traffic.py" \
--intersection "${builddir}/four_corners.json" --clock-step 0.001 \
--script "$<" --duration 1200 --events-file "$@" --flush-table-file \
--table-level 4 --table-file "${builddir}/$(*F)_table.tex"  \
--table-caption "$(*F) events" --show-substates --explain-state-transitions \
--last-event-time "${builddir}/last_event_time_$(*F)_animation.txt"

%_animation_03.csv : %_script.txt simulate_traffic.py complex_intersection.json
	python3 "${srcdir}/simulate_traffic.py" \
--intersection "${builddir}/complex_intersection.json" --clock-step 0.001 \
--script "$<" --duration 1200 --events-file "$@" --flush-table-file \
--table-level 4 --table-file "${builddir}/$(*F)_table.tex"  \
--table-caption "$(*F) events" --show-substates --explain-state-transitions \
--last-event-time "${builddir}/last_event_time_$(*F)_animation.txt"

# Create the background image for the animations.
background_01.png : draw_background.py one_way_bridge.json
	python3 "${srcdir}/draw_background.py" \
--intersection "${builddir}/one_way_bridge.json" \
--background "${builddir}/background_01.png"

background_02.png : draw_background.py four_corners.json
	python3 "${srcdir}/draw_background.py" \
--intersection "${builddir}/four_corners.json" \
--background "${builddir}/background_02.png"

background_03.png : draw_background.py complex_intersection.json
	python3 "${srcdir}/draw_background.py" \
--intersection "${builddir}/complex_intersection.json" \
--background "${builddir}/background_03.png"

# Render the animation as individual images.

# One-way bridge example.
%_animation_01.pdf : %_animation_01.csv \
background_01.png \
process_events.py build_animation.sh build_animation_serial.sh \
render_animation.sh \
signal_ccc_Green.png signal_ccc_Red.png \
signal_ccc_Yellow.png signal_ccu_Green.png signal_ccu_Red.png \
signal_ccu_Yellow.png signal_Dark_3.png signal_Dark_4.png \
signal_cccl_Green.png signal_cccl_Red.png signal_cccl_Yellow.png \
signal_llll_Flashing_Yellow.png signal_llll_Green.png signal_llll_Red.png \
signal_llll_Yellow.png signal_rrr_Green.png signal_rrr_Red.png \
signal_rrr_Yellow.png MUTCD_Ped_Signal_-_Hand_with_timer.png \
MUTCD_Ped_Signal_-_Hand_with_timer-00.png \
MUTCD_Ped_Signal_-_Hand_with_timer-01.png \
MUTCD_Ped_Signal_-_Hand_with_timer-02.png \
MUTCD_Ped_Signal_-_Hand_with_timer-03.png \
MUTCD_Ped_Signal_-_Hand_with_timer-04.png \
MUTCD_Ped_Signal_-_Hand_with_timer-05.png \
MUTCD_Ped_Signal_-_Hand_with_timer-06.png \
MUTCD_Ped_Signal_-_Hand_with_timer-07.png \
MUTCD_Ped_Signal_-_Hand_with_timer-08.png \
MUTCD_Ped_Signal_-_Hand_with_timer-09.png \
MUTCD_Ped_Signal_-_Hand_with_timer-10.png \
MUTCD_Ped_Signal_-_Hand_with_timer-11.png \
MUTCD_Ped_Signal_-_Hand_with_timer-12.png \
MUTCD_Ped_Signal_-_Hand_with_timer-13.png \
MUTCD_Ped_Signal_-_Hand_with_timer-14.png \
MUTCD_Ped_Signal_-_Hand_with_timer-15.png \
MUTCD_Ped_Signal_-_Hand_with_timer-16.png \
MUTCD_Ped_Signal_-_Hand_with_timer-17.png \
MUTCD_Ped_Signal_-_Hand_with_timer-18.png \
MUTCD_Ped_Signal_-_Hand_with_timer-19.png \
MUTCD_Ped_Signal_-_Hand_with_timer-20.png \
MUTCD_Ped_Signal_-_Hand_with_timer-21.png \
MUTCD_Ped_Signal_-_Hand_with_timer-22.png \
MUTCD_Ped_Signal_-_Hand_with_timer-23.png \
MUTCD_Ped_Signal_-_Hand_with_timer-24.png \
MUTCD_Ped_Signal_-_Hand_with_timer-25.png \
MUTCD_Ped_Signal_-_Steady_hand.png MUTCD_Ped_Signal_-_Walk.png \
car-38800411-right.png \
car-38800411-up.png truck-51893967-up.png truck-51893967-right.png \
man_walking_right.png
	bash "${srcdir}/build_animation.sh" "${srcdir}/render_animation.sh" \
"${srcdir}/process_events.py" \
"$<" "${builddir}/last_event_time_$(*F)_animation.txt" \
"${builddir}/animation_$(*F)_temp" \
"${builddir}/one_way_bridge.json" "${builddir}/background_01.png" 30
	find "${builddir}/animation_$(*F)_temp/" -type f -print0 | \
xargs --null realpath --zero | sort -z \
> "${builddir}/frames_of_$(*F)_animation.txt"
	img2pdf -o "$@" --from-file "${builddir}/frames_of_$(*F)_animation.txt"

%_animation_01.mkv : %_animation_01.pdf
	bash "${srcdir}/build_video.sh" "$@" \
"${builddir}/animation_$(*F)_temp" 30

# Four corners example.
%_animation_02.pdf : %_animation_02.csv \
background_02.png \
process_events.py build_animation.sh build_animation_serial.sh \
render_animation.sh \
signal_ccc_Green.png signal_ccc_Red.png \
signal_ccc_Yellow.png signal_ccu_Green.png signal_ccu_Red.png \
signal_ccu_Yellow.png signal_Dark_3.png signal_Dark_4.png \
signal_cccl_Green.png signal_cccl_Red.png signal_cccl_Yellow.png \
signal_llll_Flashing_Yellow.png signal_llll_Green.png signal_llll_Red.png \
signal_llll_Yellow.png signal_rrr_Green.png signal_rrr_Red.png \
signal_rrr_Yellow.png MUTCD_Ped_Signal_-_Hand_with_timer.png \
MUTCD_Ped_Signal_-_Hand_with_timer-00.png \
MUTCD_Ped_Signal_-_Hand_with_timer-01.png \
MUTCD_Ped_Signal_-_Hand_with_timer-02.png \
MUTCD_Ped_Signal_-_Hand_with_timer-03.png \
MUTCD_Ped_Signal_-_Hand_with_timer-04.png \
MUTCD_Ped_Signal_-_Hand_with_timer-05.png \
MUTCD_Ped_Signal_-_Hand_with_timer-06.png \
MUTCD_Ped_Signal_-_Hand_with_timer-07.png \
MUTCD_Ped_Signal_-_Hand_with_timer-08.png \
MUTCD_Ped_Signal_-_Hand_with_timer-09.png \
MUTCD_Ped_Signal_-_Hand_with_timer-10.png \
MUTCD_Ped_Signal_-_Hand_with_timer-11.png \
MUTCD_Ped_Signal_-_Hand_with_timer-12.png \
MUTCD_Ped_Signal_-_Hand_with_timer-13.png \
MUTCD_Ped_Signal_-_Hand_with_timer-14.png \
MUTCD_Ped_Signal_-_Hand_with_timer-15.png \
MUTCD_Ped_Signal_-_Hand_with_timer-16.png \
MUTCD_Ped_Signal_-_Hand_with_timer-17.png \
MUTCD_Ped_Signal_-_Hand_with_timer-18.png \
MUTCD_Ped_Signal_-_Hand_with_timer-19.png \
MUTCD_Ped_Signal_-_Hand_with_timer-20.png \
MUTCD_Ped_Signal_-_Hand_with_timer-21.png \
MUTCD_Ped_Signal_-_Hand_with_timer-22.png \
MUTCD_Ped_Signal_-_Hand_with_timer-23.png \
MUTCD_Ped_Signal_-_Hand_with_timer-24.png \
MUTCD_Ped_Signal_-_Hand_with_timer-25.png \
MUTCD_Ped_Signal_-_Steady_hand.png MUTCD_Ped_Signal_-_Walk.png \
car-38800411-right.png \
car-38800411-up.png truck-51893967-up.png truck-51893967-right.png \
man_walking_right.png
	bash "${srcdir}/build_animation.sh" "${srcdir}/render_animation.sh" \
"${srcdir}/process_events.py" \
"$<" "${builddir}/last_event_time_$(*F)_animation.txt" \
"${builddir}/animation_$(*F)_temp" \
"${builddir}/four_corners.json" "${builddir}/background_02.png" 30
	find "${builddir}/animation_$(*F)_temp/" -type f -print0 | \
xargs --null realpath --zero | sort -z \
> "${builddir}/frames_of_$(*F)_animation.txt"
	img2pdf -o "$@" --from-file "${builddir}/frames_of_$(*F)_animation.txt"

%_animation_02.mkv : %_animation_02.pdf
	bash "${srcdir}/build_video.sh" "$@" \
"${builddir}/animation_$(*F)_temp" 30

# Complex intersection example
%_animation_03.pdf : %_animation_03.csv \
background_03.png \
process_events.py build_animation.sh build_animation_serial.sh \
render_animation.sh \
signal_ccc_Green.png signal_ccc_Red.png \
signal_ccc_Yellow.png signal_ccu_Green.png signal_ccu_Red.png \
signal_ccu_Yellow.png signal_Dark_3.png signal_Dark_4.png \
signal_cccl_Green.png signal_cccl_Red.png signal_cccl_Yellow.png \
signal_llll_Flashing_Yellow.png signal_llll_Green.png signal_llll_Red.png \
signal_llll_Yellow.png signal_rrr_Green.png signal_rrr_Red.png \
signal_rrr_Yellow.png MUTCD_Ped_Signal_-_Hand_with_timer.png \
MUTCD_Ped_Signal_-_Hand_with_timer-00.png \
MUTCD_Ped_Signal_-_Hand_with_timer-01.png \
MUTCD_Ped_Signal_-_Hand_with_timer-02.png \
MUTCD_Ped_Signal_-_Hand_with_timer-03.png \
MUTCD_Ped_Signal_-_Hand_with_timer-04.png \
MUTCD_Ped_Signal_-_Hand_with_timer-05.png \
MUTCD_Ped_Signal_-_Hand_with_timer-06.png \
MUTCD_Ped_Signal_-_Hand_with_timer-07.png \
MUTCD_Ped_Signal_-_Hand_with_timer-08.png \
MUTCD_Ped_Signal_-_Hand_with_timer-09.png \
MUTCD_Ped_Signal_-_Hand_with_timer-10.png \
MUTCD_Ped_Signal_-_Hand_with_timer-11.png \
MUTCD_Ped_Signal_-_Hand_with_timer-12.png \
MUTCD_Ped_Signal_-_Hand_with_timer-13.png \
MUTCD_Ped_Signal_-_Hand_with_timer-14.png \
MUTCD_Ped_Signal_-_Hand_with_timer-15.png \
MUTCD_Ped_Signal_-_Hand_with_timer-16.png \
MUTCD_Ped_Signal_-_Hand_with_timer-17.png \
MUTCD_Ped_Signal_-_Hand_with_timer-18.png \
MUTCD_Ped_Signal_-_Hand_with_timer-19.png \
MUTCD_Ped_Signal_-_Hand_with_timer-20.png \
MUTCD_Ped_Signal_-_Hand_with_timer-21.png \
MUTCD_Ped_Signal_-_Hand_with_timer-22.png \
MUTCD_Ped_Signal_-_Hand_with_timer-23.png \
MUTCD_Ped_Signal_-_Hand_with_timer-24.png \
MUTCD_Ped_Signal_-_Hand_with_timer-25.png \
MUTCD_Ped_Signal_-_Steady_hand.png MUTCD_Ped_Signal_-_Walk.png \
car-38800411-right.png \
car-38800411-up.png truck-51893967-up.png truck-51893967-right.png \
man_walking_right.png
	bash "${srcdir}/build_animation.sh" "${srcdir}/render_animation.sh" \
"${srcdir}/process_events.py" \
"$<" "${builddir}/last_event_time_$(*F)_animation.txt" \
"${builddir}/animation_$(*F)_temp" \
"${builddir}/complex_intersection.json" "${builddir}/background_03.png" 30
	find "${builddir}/animation_$(*F)_temp/" -type f -print0 | \
xargs --null realpath --zero | sort -z \
> "${builddir}/frames_of_$(*F)_animation.txt"
	img2pdf -o "$@" --from-file "${builddir}/frames_of_$(*F)_animation.txt"

%_animation_03.mkv : %_animation_03.pdf
	bash "${srcdir}/build_video.sh" "$@" \
"${builddir}/animation_$(*F)_temp" 30

clean-local: clean-local-check
.PHONEY: clean-local-check
clean-local-check:
	if [ -e "copied_from_srcdir" ] ; then rm -f check_expected_output.txt ; rm copied_from_srcdir ; fi
	rm -rf autom4te.cache
	rm -rf animation_*_temp
	rm -f trace*.txt
	rm -f *~

# end of file Makefile.am

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

# Tell GNU make to disable its built-in pattern rules.
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%