dt-bindings: clock: Move versaclock.h to dt-bindings/clock

Most of the clock related dt-binding header files are located in
dt-bindings/clock folder. It would be good to keep all the similar
header files at a single location.

This was discovered while investigating the state of ownership of the
files in include/dt-bindings/ according to the MAINTAINERS file.

This change here is similar to commit 8e28918 ("dt-bindings: clock:
Move ti-dra7-atl.h to dt-bindings/clock") and commit 35d35aa
("dt-bindings: clock: Move at91.h to dt-bindigs/clock").

Signed-off-by: Lukas Bulwahn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Luca Ceresoli <[email protected]>
Reviewed-by: Luca Ceresoli <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>

Author: bulwahn

Documentation/devicetree/bindings/clock/idt,versaclock5.yaml

@@ -108,7 +108,7 @@ patternProperties:
     properties:
       idt,mode:
         description:
-          The output drive mode. Values defined in dt-bindings/clk/versaclock.h
+          The output drive mode. Values defined in dt-bindings/clock/versaclock.h
         $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 6
@@ -151,7 +151,7 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clk/versaclock.h>
+    #include <dt-bindings/clock/versaclock.h>
 
     /* 25MHz reference crystal */
     ref25: ref25m {

arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi

@@ -5,7 +5,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/clk/versaclock.h>
+#include <dt-bindings/clock/versaclock.h>
 
 / {
 	backlight_lvds: backlight-lvds {

arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi

@@ -4,7 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/versaclock.h>
+#include <dt-bindings/clock/versaclock.h>
 
 / {
 	memory@48000000 {

drivers/clk/clk-versaclock5.c

@@ -24,7 +24,7 @@
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
-#include <dt-bindings/clk/versaclock.h>
+#include <dt-bindings/clock/versaclock.h>
 
 /* VersaClock5 registers */
 #define VC5_OTP_CONTROL				0x00