throttle & more 🎆

Author: daisy-jump

tm/04.Extending/05.connectors/02.XLIFF/01.config.md

@@ -54,7 +54,7 @@ The processing options control how any returned XLIFF files are processed
 | Option | Note | 
 | - | - |
 |Produce Multiple Files| This will generate an XLIFF file for each page, instead of for your whole site.
-| Overwrite Blank Targets | When an XLIFF file is returned if it is missing any `<target>` values, Translation manager can use the value from the source as the target. This only works if the target does not need to be translated
+| Overwrite Blank Targets | When an XLIFF file is returned if it is missing any `<target>` values, Translation Manager can use the value from the source as the target. This only works if the target does not need to be translated
 | Match Languages |  Should the languages defined in the XLIFF file match exactly those in Umbraco? Most of the time this doesn't matter. You (or your provider) may have mapped the language codes to something else, as long as the translated text is as intended.
 | Language Mappings | Sometimes the languages you have installed on your site do not match exactly those supported by your translation company, for example your site might be setup in French (fr), but your translator expects French (France) (fr-fr). You can set a mapping here so when the file is processed it will send the language your translator is expecting. 
 

tm/04.Extending/05.connectors/07.CrowdinConnector/02.using.md

@@ -43,7 +43,7 @@ Following the steps in the [Approve Translations](../../../userGuide/approve) pa
 
 - Translation Manager creates a file per language inside Crowdin. 
 
-- If you cancel a job in Translation manager this will remove the file from Crowdin, you may still incur charges for any translations that have already happened for the file, but these will be lost if you delete the file. 
+- If you cancel a job in Translation M  anager this will remove the file from Crowdin, you may still incur charges for any translations that have already happened for the file, but these will be lost if you delete the file. 
 
 - You cannot reset a canceled job as the files will have been deleted from Crowdin. 
 

tm_versioned_docs/version-10.x/02.guides/03.configuration/01.backgroundchecks.md

@@ -8,7 +8,7 @@ In Umbraco v.9 and v.10 you cannot edit these settings directly via the backoffi
 
 By default Translation Manager will check the status of submitted jobs every 10 minutes. For some [Connectors](../../key_topics/connector) this will mean contacting their API and requesting the status of each job. 
 
-You can change this default behavior in the [Global Settings](/tm/reference/global) of Translation manager.
+You can change this default behavior in the [Global Settings](/tm/reference/global) of Translation Manager.
 
 ![Background settings](background.png)
 

tm_versioned_docs/version-10.x/03.Connectors/04.xliff/01.config.md

@@ -25,7 +25,7 @@ If you do change the extension, you should be sure to tell your translation prov
 If you need finer control over the xliff file processing you can access the advanced settings dialog: 
 
 :::warning
-You should only alter the advanced options if you understand the consequences on the produced XLIFF and how Translation manager processes the XLIFF files. These options are only intended to help when your translation provider requests something specific in how the XLIFF should be formatted or processed.
+You should only alter the advanced options if you understand the consequences on the produced XLIFF and how Translation Manager processes the XLIFF files. These options are only intended to help when your translation provider requests something specific in how the XLIFF should be formatted or processed.
 :::
 
 ### Formatting
@@ -50,7 +50,7 @@ The processing options control how any returned XLIFF files are processed
 
 | Option | Note | 
 | - | - |
-| Overwrite blank targets | When an XLIFF file is returned if it is missing any `<target>` values, Translation manager can use the value from the source as the target. This only works if the target does not need to be translated
+| Overwrite blank targets | When an XLIFF file is returned if it is missing any `<target>` values, Translation Manager can use the value from the source as the target. This only works if the target does not need to be translated
 | Match Languages |  Should the languages defined in the XLIFF file match exactly those in Umbraco ? Most of the time this doesn't matter. You (or your provider) may have mapped the language codes to something else, as long as the translated text is as intended.
 | Language Mappings | Sometimes the languages you have installed on your site do not match exactly those supported by your translation company, for example your site might be setup in French (fr), but your translator expects French (France) (fr-fr). You can set a mapping here so when the file is processed it will send the language your translator is expecting. 
 

tm_versioned_docs/version-10.x/06.reference/04.missing.md

@@ -17,14 +17,14 @@ This warning appearers when Translation Manager has checked the currently select
 ## Cause 
 When Translation Manager creates Translation jobs it needs to know where the translated content will be saved in Umbraco. 
 
-The relationship between the master site and the target language sites is maintained by "relations" within Umbraco. The relations tell Translation manager where the content will go for a language. 
+The relationship between the master site and the target language sites is maintained by "relations" within Umbraco. The relations tell Translation Manager where the content will go for a language. 
 
-When creating a job, Translation manager checks these relations for each possible language, if some or all of those relations are missing the warning message is displayed.
+When creating a job, Translation Manager checks these relations for each possible language, if some or all of those relations are missing the warning message is displayed.
 
 ## Fix 
 When the relations are missing they will need to be recreated - often by hand. 
 
 Our [Linked Pages Umbraco package](https://our.umbraco.com/packages/backoffice-extensions/linked-pages/) allows you to see and recreate these links. 
 
-**You should only need to create the link at the parent level to the node that is causing you issues** Translation manager will create any child relations as necessary when the translation job is created.
+**You should only need to create the link at the parent level to the node that is causing you issues** Translation Manager will create any child relations as necessary when the translation job is created.
 

tm_versioned_docs/version-12.x/03.userGuide/05.backgroundchecks.md

@@ -8,7 +8,7 @@ In Umbraco v.9 and v.10 you cannot edit these settings directly via the backoffi
 
 By default Translation Manager will check the status of submitted jobs every 10 minutes. For some [Connectors](../reference/fundementals/connector) this will mean contacting their API and requesting the status of each job. 
 
-You can change this default behavior in the [Global Settings](../reference/global) of Translation manager.
+You can change this default behavior in the [Global Settings](../reference/global) of Translation Manager.
 
 ![Background settings](background.png)
 

tm_versioned_docs/version-12.x/04.extending/01.connectors/02.XLIFF/01.config.md

@@ -25,7 +25,7 @@ If you do change the extension, you should be sure to tell your translation prov
 If you need finer control over the XLIFF file processing you can access the advanced settings dialog: 
 
 :::warning
-You should only alter the advanced options if you understand the consequences on the produced XLIFF and how Translation manager processes the XLIFF files. These options are only intended to help when your translation provider requests something specific in how the XLIFF should be formatted or processed.
+You should only alter the advanced options if you understand the consequences on the produced XLIFF and how Translation Manager processes the XLIFF files. These options are only intended to help when your translation provider requests something specific in how the XLIFF should be formatted or processed.
 :::
 
 ### Formatting
@@ -51,7 +51,7 @@ The processing options control how any returned XLIFF files are processed
 | Option | Note | 
 | - | - |
 |Multiple Files| This will generate an XLIFF file for each page, instead of for your whole site.
-| Overwrite blank targets | When an XLIFF file is returned if it is missing any `<target>` values, Translation manager can use the value from the source as the target. This only works if the target does not need to be translated
+| Overwrite blank targets | When an XLIFF file is returned if it is missing any `<target>` values, Translation Manager can use the value from the source as the target. This only works if the target does not need to be translated
 | Match Languages |  Should the languages defined in the XLIFF file match exactly those in Umbraco ? Most of the time this doesn't matter. You (or your provider) may have mapped the language codes to something else, as long as the translated text is as intended.
 | Language Mappings | Sometimes the languages you have installed on your site do not match exactly those supported by your translation company, for example your site might be setup in French (fr), but your translator expects French (France) (fr-fr). You can set a mapping here so when the file is processed it will send the language your translator is expecting. 
 

tm_versioned_docs/version-12.x/04.extending/01.connectors/07.CrowdinConnector/02.using.md

@@ -43,7 +43,7 @@ Following the steps in the [Approve Translations](../../../userGuide/approve) pa
 
 - Translation Manager creates a file per language inside Crowdin. 
 
-- If you cancel a job in Translation manager this will remove the file from Crowdin, you may still incur charges for any translations that have already happened for the file, but these will be lost if you delete the file. 
+- If you cancel a job in Translation Manager this will remove the file from Crowdin, you may still incur charges for any translations that have already happened for the file, but these will be lost if you delete the file. 
 
 - You cannot reset a canceled job as the files will have been deleted from Crowdin. 
 

tm_versioned_docs/version-12.x/05.reference/04.missing.md

@@ -17,14 +17,14 @@ This warning appearers when Translation Manager has checked the currently select
 ## Cause 
 When Translation Manager creates Translation jobs it needs to know where the translated content will be saved in Umbraco. 
 
-The relationship between the master site and the target language sites is maintained by "relations" within Umbraco. The relations tell Translation manager where the content will go for a language. 
+The relationship between the master site and the target language sites is maintained by "relations" within Umbraco. The relations tell Translation Manager where the content will go for a language. 
 
-When creating a job, Translation manager checks these relations for each possible language, if some or all of those relations are missing the warning message is displayed.
+When creating a job, Translation Manager checks these relations for each possible language, if some or all of those relations are missing the warning message is displayed.
 
 ## Fix 
 When the relations are missing they will need to be recreated - often by hand. 
 
 Our [Linked Pages Umbraco package](https://our.umbraco.com/packages/backoffice-extensions/linked-pages/) allows you to see and recreate these links. 
 
-**You should only need to create the link at the parent level to the node that is causing you issues** Translation manager will create any child relations as necessary when the translation job is created.
+**You should only need to create the link at the parent level to the node that is causing you issues** Translation Manager will create any child relations as necessary when the translation job is created.
 

tm_versioned_docs/version-13.x/03.userGuide/05.backgroundchecks.md

@@ -8,7 +8,7 @@ In Umbraco v.9 and v.10 you cannot edit these settings directly via the backoffi
 
 By default Translation Manager will check the status of submitted jobs every 10 minutes. For some [Connectors](../reference/fundementals/connector) this will mean contacting their API and requesting the status of each job. 
 
-You can change this default behavior in the [Global Settings](../reference/global) of Translation manager.
+You can change this default behavior in the [Global Settings](../reference/global) of Translation Manager.
 
 ![Background settings](background.png)