Update KCL docs (#587)

YOYO NEW KCL DOCS!!

Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>

Author: zoo-github-actions-auth[bot]

content/pages/docs/kcl-std/functions/std-sketch-loft.md

@@ -29,7 +29,7 @@ The sketches need to be closed and on different planes that are parallel.
 | `vDegree` | [`number(_)`](/docs/kcl-std/types/std-types-number) | Degree of the interpolation. Must be greater than zero. For example, use 2 for quadratic, or 3 for cubic interpolation in the V direction. | No |
 | `bezApproximateRational` | [`bool`](/docs/kcl-std/types/std-types-bool) | Attempt to approximate rational curves (such as arcs) using a bezier. This will remove banding around interpolations between arcs and non-arcs. It may produce errors in other scenarios. Over time, this field won't be necessary. | No |
 | `baseCurveIndex` | [`number(_)`](/docs/kcl-std/types/std-types-number) | This can be set to override the automatically determined topological base curve, which is usually the first section encountered. | No |
-| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Tolerance for the loft operation. | No |
+| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Defines the smallest distance below which two entities are considered coincident, intersecting, coplanar, or similar. For most use cases, it should not be changed from its default value of 10^-7 millimeters. | No |
 | `tagStart` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | A named tag for the face at the start of the loft, i.e. the original sketch. | No |
 | `tagEnd` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | A named tag for the face at the end of the loft. | No |
 

content/pages/docs/kcl-std/functions/std-sketch-revolve.md

@@ -38,7 +38,7 @@ revolved around the same axis.
 | `sketches` | [`[Sketch; 1+]`](/docs/kcl-std/types/std-types-Sketch) | The sketch or set of sketches that should be revolved | Yes |
 | `axis` | [`Axis2d`](/docs/kcl-std/types/std-types-Axis2d) or [`Edge`](/docs/kcl-std/types/std-types-Edge) | Axis of revolution. | Yes |
 | `angle` | [`number(Angle)`](/docs/kcl-std/types/std-types-number) | Angle to revolve (in degrees). Default is 360. | No |
-| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Tolerance for the revolve operation. | No |
+| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Defines the smallest distance below which two entities are considered coincident, intersecting, coplanar, or similar. For most use cases, it should not be changed from its default value of 10^-7 millimeters. | No |
 | `symmetric` | [`bool`](/docs/kcl-std/types/std-types-bool) | If true, the extrusion will happen symmetrically around the sketch. Otherwise, the extrusion will happen on only one side of the sketch. | No |
 | `bidirectionalAngle` | [`number(Angle)`](/docs/kcl-std/types/std-types-number) | If specified, will also revolve in the opposite direction to 'angle' to the specified angle. If 'symmetric' is true, this value is ignored. | No |
 | `tagStart` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | A named tag for the face at the start of the revolve, i.e. the original sketch. | No |

content/pages/docs/kcl-std/functions/std-sketch-sweep.md

@@ -35,7 +35,7 @@ swept along the same path.
 | `sketches` | [`[Sketch; 1+]`](/docs/kcl-std/types/std-types-Sketch) | The sketch or set of sketches that should be swept in space. | Yes |
 | `path` | [`Sketch`](/docs/kcl-std/types/std-types-Sketch) or [`Helix`](/docs/kcl-std/types/std-types-Helix) | The path to sweep the sketch along. | Yes |
 | `sectional` | [`bool`](/docs/kcl-std/types/std-types-bool) | If true, the sweep will be broken up into sub-sweeps (extrusions, revolves, sweeps) based on the trajectory path components. | No |
-| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Tolerance for this operation. | No |
+| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Defines the smallest distance below which two entities are considered coincident, intersecting, coplanar, or similar. For most use cases, it should not be changed from its default value of 10^-7 millimeters. | No |
 | `relativeTo` | [`string`](/docs/kcl-std/types/std-types-string) | What is the sweep relative to? Can be either 'sketchPlane' or 'trajectoryCurve'. | No |
 | `tagStart` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | A named tag for the face at the start of the sweep, i.e. the original sketch. | No |
 | `tagEnd` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | A named tag for the face at the end of the sweep. | No |

content/pages/docs/kcl-std/functions/std-solid-fillet.md

@@ -28,7 +28,7 @@ will smoothly blend the transition.
 | `solid` | [`Solid`](/docs/kcl-std/types/std-types-Solid) | The solid whose edges should be filletted | Yes |
 | `radius` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The radius of the fillet | Yes |
 | `tags` | [`[Edge; 1+]`](/docs/kcl-std/types/std-types-Edge) | The paths you want to fillet | Yes |
-| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The tolerance for this fillet | No |
+| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Defines the smallest distance below which two entities are considered coincident, intersecting, coplanar, or similar. For most use cases, it should not be changed from its default value of 10^-7 millimeters. | No |
 | `tag` | [`TagDecl`](/docs/kcl-std/types/std-types-TagDecl) | Create a new tag which refers to this fillet | No |
 
 ### Returns

content/pages/docs/kcl-std/functions/std-solid-intersect.md

@@ -24,7 +24,7 @@ verifying fit, and analyzing overlapping geometries in assemblies.
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `solids` | `[Solid; 2+]` | The solids to intersect. | Yes |
-| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The tolerance to use for the intersection operation. | No |
+| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Defines the smallest distance below which two entities are considered coincident, intersecting, coplanar, or similar. For most use cases, it should not be changed from its default value of 10^-7 millimeters. | No |
 
 ### Returns
 

content/pages/docs/kcl-std/functions/std-solid-subtract.md

@@ -27,7 +27,7 @@ and complex multi-body part modeling.
 |----------|------|-------------|----------|
 | `solids` | [`[Solid; 1+]`](/docs/kcl-std/types/std-types-Solid) | The solids to use as the base to subtract from. | Yes |
 | `tools` | [`[Solid]`](/docs/kcl-std/types/std-types-Solid) | The solids to subtract. | Yes |
-| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The tolerance to use for the subtraction operation. | No |
+| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Defines the smallest distance below which two entities are considered coincident, intersecting, coplanar, or similar. For most use cases, it should not be changed from its default value of 10^-7 millimeters. | No |
 
 ### Returns
 

content/pages/docs/kcl-std/functions/std-solid-union.md

@@ -21,7 +21,7 @@ union(
 | Name | Type | Description | Required |
 |----------|------|-------------|----------|
 | `solids` | `[Solid; 2+]` | The solids to union. | Yes |
-| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | The tolerance to use for the union operation. | No |
+| `tolerance` | [`number(Length)`](/docs/kcl-std/types/std-types-number) | Defines the smallest distance below which two entities are considered coincident, intersecting, coplanar, or similar. For most use cases, it should not be changed from its default value of 10^-7 millimeters. | No |
 
 ### Returns