Add in the Elegoo Neptune 4

Author: paultag

config/prusa/neptune4.ini

@@ -0,0 +1,345 @@
+# generated by PrusaSlicer 2.8.0 on 2024-08-06 at 15:20:43 UTC
+arc_fitting = disabled
+autoemit_temperature_commands = 1
+avoid_crossing_curled_overhangs = 0
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,225x0,225x225,0x225
+bed_temperature = 60
+before_layer_gcode = 
+between_objects_gcode = 
+binary_gcode = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_separation = 0
+brim_type = outer_only
+brim_width = 0
+chamber_minimal_temperature = 0
+chamber_temperature = 0
+color_change_gcode = M600
+colorprint_heights = 
+complete_objects = 0
+cooling = 1
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_acceleration = 0
+default_filament_profile = 
+default_print_profile = 
+deretract_speed = 0
+disable_fan_first_layers = 3
+dont_support_bridges = 1
+draft_shield = disabled
+duplicate_distance = 6
+elefant_foot_compensation = 0
+enable_dynamic_fan_speeds = 0
+enable_dynamic_overhang_speeds = 0
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
+external_perimeter_acceleration = 0
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 50%
+external_perimeters_first = 0
+extra_loading_move = -2
+extra_perimeters = 1
+extra_perimeters_on_overhangs = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_colour = ""
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0.45
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 0
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_infill_max_crossing_speed = 0
+filament_infill_max_speed = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = ""
+filament_purge_multiplier = 100%
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_length_toolchange = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
+filament_retract_speed = nil
+filament_settings_id = "Elegoo Neptune 4"
+filament_shrinkage_compensation_xy = 0%
+filament_shrinkage_compensation_z = 0%
+filament_soluble = 0
+filament_spool_weight = 0
+filament_stamping_distance = 0
+filament_stamping_loading_speed = 20
+filament_toolchange_delay = 0
+filament_travel_lift_before_obstacle = nil
+filament_travel_max_lift = nil
+filament_travel_ramping_lift = nil
+filament_travel_slope = nil
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
+filament_wipe = nil
+fill_angle = 45
+fill_density = 20%
+fill_pattern = stars
+first_layer_acceleration = 0
+first_layer_acceleration_over_raft = 0
+first_layer_bed_temperature = 60
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.35
+first_layer_speed = 30
+first_layer_speed_over_raft = 30
+first_layer_temperature = 200
+full_fan_speed_layer = 0
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 20
+gcode_comments = 0
+gcode_flavor = klipper
+gcode_label_objects = disabled
+gcode_resolution = 0.0125
+gcode_substitutions = 
+high_current_on_filament_swap = 0
+host_type = prusalink
+idle_temperature = nil
+infill_acceleration = 0
+infill_anchor = 600%
+infill_anchor_max = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_overlap = 25%
+infill_speed = 80
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_gcode = 
+layer_height = 0.3
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 10000,5000
+machine_max_acceleration_extruding = 1500,1250
+machine_max_acceleration_retracting = 1500,1250
+machine_max_acceleration_travel = 1500,1250
+machine_max_acceleration_x = 9000,1000
+machine_max_acceleration_y = 9000,1000
+machine_max_acceleration_z = 500,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 500,200
+machine_max_feedrate_y = 500,200
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 2.5,2.5
+machine_max_jerk_x = 10,10
+machine_max_jerk_y = 10,10
+machine_max_jerk_z = 0.2,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_fan_speed = 100
+max_layer_height = 0
+max_print_height = 265
+max_print_speed = 80
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_bead_width = 85%
+min_fan_speed = 35
+min_feature_size = 25%
+min_layer_height = 0.07
+min_print_speed = 10
+min_skirt_length = 0
+mmu_segmented_region_interlocking_depth = 0
+mmu_segmented_region_max_width = 0
+multimaterial_purging = 140
+notes = 
+nozzle_diameter = 0.4
+only_one_perimeter_first_layer = 0
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhang_fan_speed_0 = 0
+overhang_fan_speed_1 = 0
+overhang_fan_speed_2 = 0
+overhang_fan_speed_3 = 0
+overhang_speed_0 = 15
+overhang_speed_1 = 15
+overhang_speed_2 = 20
+overhang_speed_3 = 25
+overhangs = 1
+parking_pos_retraction = 92
+pause_print_gcode = M601
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_generator = arachne
+perimeter_speed = 60
+perimeters = 3
+physical_printer_settings_id = 
+post_process = 
+prefer_clockwise_movements = 0
+print_host = 
+print_settings_id = Elegoo Neptune 4
+printer_model = 
+printer_notes = 
+printer_settings_id = Elegoo Neptune 4
+printer_technology = FFF
+printer_variant = 
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+remaining_times = 0
+resolution = 0
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 2
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+seam_position = aligned
+silent_mode = 1
+single_extruder_multi_material = 0
+single_extruder_multi_material_priming = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+slicing_mode = regular
+slowdown_below_layer_time = 5
+small_perimeter_speed = 15
+solid_infill_acceleration = 0
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 20
+spiral_vase = 0
+staggered_inner_seams = 0
+standby_temperature_delta = -5
+start_filament_gcode = "; Filament gcode\n"
+start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 0
+support_material_with_sheath = 1
+support_material_xy_spacing = 50%
+support_tree_angle = 40
+support_tree_angle_slow = 25
+support_tree_branch_diameter = 2
+support_tree_branch_diameter_angle = 5
+support_tree_branch_diameter_double_wall = 3
+support_tree_branch_distance = 1
+support_tree_tip_diameter = 0.8
+support_tree_top_rate = 15%
+temperature = 200
+template_custom_gcode = 
+thick_bridges = 1
+thin_walls = 1
+thumbnails = 
+thumbnails_format = PNG
+toolchange_gcode = 
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_one_perimeter_type = none
+top_solid_infill_acceleration = 0
+top_solid_infill_speed = 15
+top_solid_layers = 3
+top_solid_min_thickness = 0
+travel_acceleration = 0
+travel_lift_before_obstacle = 0
+travel_max_lift = 0
+travel_ramping_lift = 0
+travel_slope = 0
+travel_speed = 130
+travel_speed_z = 0
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wipe = 0
+wipe_into_infill = 0
+wipe_into_objects = 0
+wipe_tower = 0
+wipe_tower_acceleration = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_cone_angle = 0
+wipe_tower_extra_flow = 100%
+wipe_tower_extra_spacing = 100%
+wipe_tower_extruder = 0
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+wiping_volumes_matrix = 0
+wiping_volumes_use_custom_matrix = 0
+xy_size_compensation = 0
+z_offset = 0