MiBoxer Fut106zr #19431
Replies: 8 comments 7 replies
-
|
can you provide the data/database.db entry of your device? |
Beta Was this translation helpful? Give feedback.
-
|
Here is mine: {"id":2,"type":"Router","ieeeAddr":"0xa4c138e02c58106c","nwkAddr":735,"manufId":4417,"manufName":"_TZB210_rwy5hexp","powerSource":"Mains (single phase)","modelId":"TS0505B","epList":[1,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":269,"inClusterList":[3,4,5,6,4096,8,768,61184,0],"outClusterList":[25,10],"clusters":{"genBasic":{"attributes":{"modelId":"TS0505B","manufacturerName":"_TZB210_rwy5hexp","powerSource":1,"zclVersion":3,"appVersion":64,"stackVersion":0,"hwVersion":1,"dateCode":""}},"lightingColorCtrl":{"attributes":{"colorCapabilities":29}}},"binds":[],"configuredReportings":[],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":64,"stackVersion":0,"hwVersion":1,"dateCode":"","zclVersion":3,"interviewCompleted":true,"meta":{"configured":1842547789},"lastSeen":1702477450904,"defaultSendRequestWhen":"immediate"} |
Beta Was this translation helpful? Give feedback.
-
|
Would it also be possible to add the MiBoxer FUT103ZR (which is also a GU10 RGB+CCT bulb but 4W and with less total height)? https://miboxer.com/product/4w-gu10-rgbcct-led-spotlight-zigbee-3-0-2-4g It also shows up as Tuya TS0505B_1 right now (running 2.1.3). Besides Effect not working, I notice refreshing the State leads to a timeout (The bulb can also be controller with the MiLight protocol, so being able to refresh it - or it being refreshed - would be nice). The database entry for this one: {"id":4,"type":"Router","ieeeAddr":"0xa4c1386f4af477e9","nwkAddr":15811,"manufId":4417,"manufName":"_TZB210_6eed09b9","powerSource":"Mains (single phase)","modelId":"TS0505B","epList":[1,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":269,"inClusterList":[3,4,5,6,4096,8,768,61184,0],"outClusterList":[25,10],"clusters":{"genBasic":{"attributes":{"stackVersion":0,"dateCode":""}},"lightingColorCtrl":{"attributes":{"colorCapabilities":29}}},"binds":[],"configuredReportings":[],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":64,"stackVersion":0,"hwVersion":1,"dateCode":"","zclVersion":3,"interviewCompleted":true,"meta":{"configured":332242049},"lastSeen":1743854074459} |
Beta Was this translation helpful? Give feedback.
-
|
I have another one. Can you help again? It's the MiBoxer FUT068ZR Again it's currently showing up as Tuya TS0505B_1 (running Z2M 2.5.1) The database entry for this one is: {"id":10,"type":"Router","ieeeAddr":"0x4c5bb3fffe930548","nwkAddr":18884,"manufId":4098,"manufName":"_TZB210_endmggws","powerSource":"Mains (single phase)","modelId":"TS0505B","epList":[1,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":269,"inClusterList":[0,3,4,5,6,4096,8,768,61184],"outClusterList":[25,10],"clusters":{"genBasic":{"attributes":{"modelId":"TS0505B","manufacturerName":"_TZB210_endmggws","powerSource":1,"zclVersion":3,"appVersion":71,"stackVersion":0,"hwVersion":1,"dateCode":""}},"lightingColorCtrl":{"attributes":{"colorCapabilities":29}}},"binds":[],"configuredReportings":[],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":71,"stackVersion":0,"hwVersion":1,"dateCode":"","zclVersion":3,"interviewCompleted":true,"interviewState":"SUCCESSFUL","meta":{"configured":332242049},"lastSeen":1752270227204} |
Beta Was this translation helpful? Give feedback.
-
|
Pretty please? :) |
Beta Was this translation helpful? Give feedback.
-
|
Awesome. Thanks again, @chris-1243! |
Beta Was this translation helpful? Give feedback.
-
|
Hi All, I could use some help. I have recently bought the FUT106ZR, it seems the previous state is not remembered. when I turn off and on the lights it defaults to white color instead of the previous state. according to milight this is 'normal' for home assistant so i should buy a tuya or hue hub to resolve this. i wanted to ask here if this is in some way fixable? kind regards, Jordy |
Beta Was this translation helpful? Give feedback.
-
|
I currently don't have my FUT106ZR in use, but I do have 2x FUT103ZR in use. After I cut their power they always go on. This is normal for MiBoxer/MiLight. I have older, non-Zigbee lights from this brand and they do the same. But they do go back to the color they were in before cutting the power. I'm using a SMLight SLZB-M03, so definitely not a Tuya (MiBoxer is Tuya as well) or Hue Hub. I see that I never set their Color Power On Behavior (Initial, Previous, Customized), bottom of Exposed Functions. How is yours set? |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
-
The MiBoxer Fut106zr seems to be compatible with Zigbee2Mqtt. It was discovered as Tuya TS0505B_1. I can fully control the color and brightness of the lights. It is fully controllable in Home Assistant via the Zigbee2mqtt add in. There may be issues with the Effects, but I don't need those. I am not sure how get this added to supported devices list, so am posting here.
Beta Was this translation helpful? Give feedback.
All reactions