Replies: 16 comments 16 replies
-
|
Happy new year and thanks for this amazing piece of software! |
Beta Was this translation helpful? Give feedback.
-
|
Beste wishes and thanks everyone for all the work beeing put into zigbee2mqtt! |
Beta Was this translation helpful? Give feedback.
-
|
facing problems with my existing DIY external converters (basing on PTVO's solutions) - they are simply not recognized anymore. Anybody else having this issue? |
Beta Was this translation helpful? Give feedback.
-
|
Yes, exactly same problem. Update : |
Beta Was this translation helpful? Give feedback.
-
|
Update the imports at the start of the converter to this: const zigbeeHerdsmanConverters = require('zigbee-herdsman-converters');
const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const extend = require('zigbee-herdsman-converters/lib/extend');
const e = exposes.presets;
const ea = exposes.access; |
Beta Was this translation helpful? Give feedback.
-
|
Mine also required changes to the external converter .js file imports, as above but also to the ptvo_switch definition line:
Further details on the PTVO website : |
Beta Was this translation helpful? Give feedback.
-
|
thanks @rognixon , that did the trick |
Beta Was this translation helpful? Give feedback.
-
|
Look at all these lines in the release notes, fantastic! Best wishes to everyone! |
Beta Was this translation helpful? Give feedback.
-
|
Happy new year and thank you for the update! |
Beta Was this translation helpful? Give feedback.
-
|
Happy New Year! Thank you for all your work! Since Updating to 1.35.0, my Aqara Zigbee 3.0 LED strip T1 [LGYCDD01LM] no longer allow me to select color. Just temperature. Any one else have this problem? |
Beta Was this translation helpful? Give feedback.
-
|
Same here. I was surprised I didn't see LGYCDD01LM listed in the release notes and I see no references to it in the latest changes. |
Beta Was this translation helpful? Give feedback.
-
|
Best I can tell, it may have been from these changes: Koenkk/zigbee-herdsman-converters@v15.131.0...v18.3.0#diff-413b42ed3dc2bb32fbcfbc4db8b0242f76ff72d0e313986424e2f8a319baeb2bL979-L1060 zigbee-herdsman-converters got upgraded from 15.131.0 to 18.3.0 for zigbee2mqtt 1.35.0 |
Beta Was this translation helpful? Give feedback.
-
|
@kirovilya could you check this? |
Beta Was this translation helpful? Give feedback.
-
|
@Koenkk should I create an issue for this? If so, should it be in this repo of the |
Beta Was this translation helpful? Give feedback.
-
|
nm, looks like someone already created one here: #20497 |
Beta Was this translation helpful? Give feedback.
-
|
Unfo same problem with ptvo device. After some attempts to revive it decided rollback to previous version. |
Beta Was this translation helpful? Give feedback.
-
|
Moes zigbee TRV's has been come crazy since the update. They jump from one temperature to another and a command to one TRV also affects the other. The TRV jump from 21°C to 30°C for now reason. Before the update i had no problems. I use better thermostat to control the TRVs |
Beta Was this translation helpful? Give feedback.
-
|
Not in the list - you removed the color support for Aqara lightstrip T1 - thanks for it. Not. Luckily i've a backup. |
Beta Was this translation helpful? Give feedback.
-
|
Ever since updating seeing a few errors now being thrown Home Assistant (latest stable) and Z2M (1.35.0). From Z2M: In HA: The device in question is a https://www.zigbee2mqtt.io/devices/43082.html#enbrighten-43082. |
Beta Was this translation helpful? Give feedback.
-
|
Mine did the automatic update, after that my plugin (homebridge-z2m) in homebridge started to show errors and no longer communicates with zigbee2mqtt. [zigbee2mqtt] Failed to process MQTT message on 'zigbee2mqtt/bridge/devices´ . (Maybe check the MQTT version?) Can I go back to version 1.33.1 that was working with the plugin ? how do I do? |
Beta Was this translation helpful? Give feedback.
-
|
Seems it might be this itavero/homebridge-z2m#794 |
Beta Was this translation helpful? Give feedback.
-
|
Thanks Nerivec! To test I created a new server, when I went to install the plugins I saw the correction! Working again! |
Beta Was this translation helpful? Give feedback.
-
|
Most of my Tuya stuff, dimmers and switches are now becoming unavailable for a few moments every hour! |
Beta Was this translation helpful? Give feedback.
-
|
Hi, 1.35.0 fails to properly recognise LDSENK02S. In version 1.34.0 the state is like this: but in version 1.35.0 it includes voltage and current but with null value and one error is raised when trying to obtain some values from the device. Don't remember exactly the value names but they are related with multipliers. Also, in version 1.35.0 the TS011F from _TZ3000_cphmq0q7 does not work properly as I can't set on/off status anymore. Going back to 1.34.0 fixed the issues |
Beta Was this translation helpful? Give feedback.
-
|
great improvements! Just 1 question: switch.zigbee2mqtt_bridge_permit_join allow the possibility to join a new device. when it is triggered by home assistant it's permanently on (sensor.zigbee2mqtt_bridge_permit_join_timeout remains in unknown state). |
Beta Was this translation helpful? Give feedback.
-
|
Not sure what you mean by "link the two switches"? The "Permit Join" state is already the same between Frontend and HA entity. The only thing different is that the HA switch entity does not have a timeout (because it's easier to control that on the HA side). Having the HA switch also timeout would be possible, but it would have to be configured on the Z2M side and I am not sure that adding a new config option there is a good idea. What would be easy to do is have two switch entities (probably with one disabled by default), one with the standard timeout, the other without. |
Beta Was this translation helpful? Give feedback.
-
I think the timeout sensor would probably be better off disabled by default, or not added at all and left to the Z2M-side. It'll create less confusion. HA can easily deal with timing out the switch on its own. Bonus, it's now easily available via voice assist (if configured..), so, easy to on/off at will. A quick automation to ensure it's automatically turned back off after 10 minutes: trigger:
- platform: state
entity_id:
- switch.zigbee2mqtt_bridge_permit_join
to: "on"
for:
hours: 0
minutes: 10
seconds: 0
condition: []
action:
- service: switch.turn_off
metadata: {}
data: {}
target:
entity_id: switch.zigbee2mqtt_bridge_permit_join |
Beta Was this translation helpful? Give feedback.
-
|
the possibility of creating two different switches (1 with timeout and 1 without) in my opinion will work better. thanks |
Beta Was this translation helpful? Give feedback.
-
|
I just switched from dev to release (1.35.0) in the hopes that this was in fact resolved, but it looks like it's back - unable to get OTA updated for Sengled E21-N1EA Error 2024-01-03 15:29:41Failed to check if update available for 'Office Sengled' (No image available for imageType '32972') |
Beta Was this translation helpful? Give feedback.
-
|
Opened new issue #20582 and referenced the prior closed one from some time back. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, |
Beta Was this translation helpful? Give feedback.
-
|
Koenkk/zigbee-herdsman-converters#6819 Should be fixed in next release of Z2M. |
Beta Was this translation helpful? Give feedback.
and others
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Feel free to discuss the v1.35.0 release here!
Happy new year everyone! 🎆 🍾
Beta Was this translation helpful? Give feedback.
All reactions