Heiman HS1SA-E is recognized as HEIMAN HS1SA

[Josager]

What happened?

My Heiman Smoke Sensor with Zigbee Model SmokeSensor-EF-3.0 is currently incorrectly recognized as HS1SA. It should be recognized as HS1SA-E, as it is the Zigbee 3.0 version.

What did you expect to happen?

No response

How to reproduce it (minimal and precise)

No response

Zigbee2MQTT version

2.7.2

Adapter firmware version

8.0.2

Adapter

EmberZNet

Setup

Addon on Homeassistant OS

Device database.db entry

No response

Debug log

No response

Notes

No response

[chris-1243]

Could you share the database.db entry of this device ?

[Josager]

Sure here you go{"id":72,"type":"EndDevice","ieeeAddr":"0x187a3efffe75098a","nwkAddr":5714,"manufId":4619,"manufName":"HEIMAN","powerSource":"Battery","modelId":"SmokeSensor-EF-3.0","epList":[1],"endpoints":{"1":{"profId":260,"epId":1,"devId":1026,"inClusterList":[0,1,3,32,1280,1282,2821],"outClusterList":[25],"clusters":{"genBasic":{"attributes":{"modelId":"SmokeSensor-EF-3.0","manufacturerName":"HEIMAN","powerSource":3,"zclVersion":3,"appVersion":19,"stackVersion":2,"hwVersion":4,"dateCode":"20241221"}},"ssIasZone":{"attributes":{"iasCieAddr":"0xcc86ecfffec73373","zoneState":1}},"genPollCtrl":{"attributes":{"checkinInterval":28800}},"genPowerCfg":{"attributes":{"batteryPercentageRemaining":200}}},"binds":[{"cluster":32,"type":"endpoint","deviceIeeeAddress":"0xcc86ecfffec73373","endpointID":1},{"cluster":1,"type":"endpoint","deviceIeeeAddress":"0xcc86ecfffec73373","endpointID":1}],"configuredReportings":[{"cluster":1,"attrId":33,"minRepIntval":3600,"maxRepIntval":65000,"repChange":0}],"meta":{}}},"appVersion":19,"stackVersion":2,"hwVersion":4,"dateCode":"20241221","zclVersion":3,"interviewCompleted":true,"interviewState":"SUCCESSFUL","meta":{"configured":-1377615576},"lastSeen":1767299554061,"checkinInterval":7200}

[chris-1243]

Could you add this file as an external converter and rename it with a *.mjsextension. Check if everything is working and report here please.

heiman.txt

The HS1SA-E seems to expose more data than the HS1SA

[Josager]

I tested the provided .mjs file, but it does not work with my HS1SA-E.

It seems that the Z2M entities defined in the converter are actually meant for the S1-E model (e.g. the Dual Ray sensors) and not for the HS1SA. Since I definitely have an HS1SA according to the label, these features are failing

[Josager]

The New Modell is the HS1SA-EF wich is a revision of the HS1SA-E so the docs should be updated to make this clear