lw450tt.ppd cupsManualCopies settings

[jck000]

I used a ppd file from the original Dymo tar file which has *cupsManualCopies = True. However, all of the files here have that parameter value set to False. Having it set to False will not honor '-n XXX' from the lp command. When changed to True, '-n XXX' will correctly produce the number of copies specified.

On my system I have a LabelWrite 450 and a LabelWriter 450 TwinTurbo and have tested the ppd
files with *cupsManualCopies = True.

I suggest a change to all ppd files:

*cupsManualCopies = True

Thanks,
Jack

[Kyle-Falconer]

That's an interesting find. Can you provide a link for this tar file?

[jck000]

Let me be clear, the original ppd file, I don't think I edited it at all and I haven't compared all of the ppds with your fork. I've got the original installed on Ubuntu and Centos. I've gone ahead and installed that on a Raspberry PI, but as you probably know anything from Dymo is old and only supports intel versions of executables. I used your fork to deploy to a Raspberry PI especially for the LW450TT. On the original it would not allow me to switch slots. You fork has no problems with that. The -n option is the only issue I ran into and I did a simple comparison and that's what I found. Trivial. I wanted to share that with you.

Here is the link:

https://www.dymo.com/en-US/dymo-label-sdk-cups-linux-p

Thanks,
Jack

[Kyle-Falconer]

Ok, great. I thought that's what you meant. I'll take a look at it and make the change.