HSIO Configuration and Graphic outputs

[acruxcz]

Hi,

we just design our product using your module, so:

• what about PCIe BIOS? We prefer maximum number of PCI and 2 or 4 USB 3. What is a planed configuration for that bios?
• We strongly prefer using only DP/eDP ports. There is any possibility to use all TCP ports for DP? According ADL-N datasheet, it should be possible....

Thanks.

[alphaarea]

• You can configure the PCIe and USB3 ports to the extent that the N100 CPU hardware allows, as shown below.
• The video outputs can all be configured as DP connectors, the circuitry for DP is simpler than for HDMI.

[acruxcz]

But this require specific bios for that configuration, right?

[alphaarea]

Yes, to change the port configuration must change the BIOS binary, which cannot be done through the BIOS setup menu.

You can request a test BIOS by sending specific configuration requirements to techsupport@lattepanda.com

[DiodeDrop]

* The video outputs can all be configured as DP connectors, the circuitry for DP is simpler than for HDMI.

Do you know which lanes are which on TCP0 when configured for DP?
e.g.
TCP0_TX0 --> LANE0
TCP0_TXRX0 --> LANE1
etc.

Or, would you have a reference schematic for DP on the Mu?