Display devboard: GUITION JC8048W550C
CAN tranceiver: TJA1050
Power module: MP1584
Screw : DIN 912 M3x16
Heat brass insert nut: M3x5x5
Connectors:
Adapter -- ECU wiring (JST XH 2.54 4pin)
GND / 12V / CAN_L / CAN_H
P1 Power
(use 4pin JST1.25 connector near the USB)
Power module MP1584 Vout -- 5V
RX/TX unused
Power module MP1584 GND -- GND
P4 CANbus
Adapter -- Display devboard (4pin JST1.25)
CAN transceiver VCC -- 3.3V !!! Note: in latest firmware(bench, start/stop, ...) not working, use 5V form another place
CAN transceiver GND -- GND
CAN transceiver TX -- PIN_17
CAN transceiver RX -- PIN_18 (buld resistor divider to 3.3V input or use 3V CAN transceiver)
