Merge branch 'master' into develop

Author: mluis1

CHANGELOG.md

@@ -11,32 +11,26 @@ Please refer to [Releases pre-certification-results](https://github.com/Lora-net
 
 ## [Unreleased]
 
-## Added
+### Changed
 
-- Added GitHUb repository and firmware examples version definitions
-- Added Version_t Revision field to DutVersionAns message.
+- Changed IMST boards default power source to USB_POWER
 
-## Changed
+### Fixed
 
-- Changed fuota-test-01 examples in order to handle the new certification protocol implementation
+- Fixed an issue where the Join back off algorithm wasn't being applied when the duty-cycle enforcement was OFF.
+- Fixed `AU915_MAX_RX1_DR_OFFSET` value to 5 instead of 6
 
-## Fixed
+### Removed
 
-- Fixed compliance protocol implementation in order to get current versions from the MAC layer
-- Fixed `RxAppCnt` parameter endianess handling
-- Fixed AS923 max payload lengths by using N values instead of M values.
+- Removed NvmCtxCallback calls as they should only be done when a modification happens.
+- Removed ClassA, ClassB and ClassC examples.
 
 ## [4.4.5] - 2020-10-14
 
 ### General
 
-- Release based on "LoRaWAN specification 1.0.4"/"LoRaWAN specification 1.1.1" and "LoRaWAN Regional Parameters 2-1.0.1"
-- GitHub reported issues corrections. Please refer to [Release Version 5.0.0](https://github.com/Lora-net/LoRaMac-node/milestone/3)
-
-### Removed
-
-- Removed ClassA, ClassB and ClassC examples.
-- Removed AS923 no more used `MaxPayloadOfDatarateDwell1DownAS923` table definition.
+- Release based on "LoRaWAN specification 1.0.3" and "LoRaWAN Regional Parameters v1.0.3revA"
+- GitHub reported issues corrections. Please refer to [Release Version 4.4.5](https://github.com/Lora-net/LoRaMac-node/milestone/7)
 
 ### Added
 

README.md

@@ -24,7 +24,7 @@ This project has 3 active branches in place.
 | ------------- |:-------------:|:---------:|:---------:|:---------:|:--------------|
 | | [1.0.3](https://lora-alliance.org/resource-hub/lorawanr-specification-v103) | [v1.0.3revA](https://www.lora-alliance.org/resource-hub/lorawanr-regional-parameters-v103reva) | [v4.4.5](https://github.com/Lora-net/LoRaMac-node/releases/tag/v4.4.5) | A/B/C | LoRaWAN L2 1.0.3 - **_Released_** |
 | [master](https://github.com/Lora-net/LoRaMac-node/tree/master) | [1.0.3](https://lora-alliance.org/resource-hub/lorawanr-specification-v103) | [v1.0.3revA](https://www.lora-alliance.org/resource-hub/lorawanr-regional-parameters-v103reva) | [M 4.4.6](https://github.com/Lora-net/LoRaMac-node/milestone/8) | A/B/C | LoRaWAN L2 1.0.3 |
-| [develop](https://github.com/Lora-net/LoRaMac-node/tree/develop) | [1.0.4](https://lora-alliance.org/resource-hub) | [2-1.0.1](https://lora-alliance.org/sites/default/files/2020-02/rp_2-1.0.1.pdf) | [M 4.5.0](https://github.com/Lora-net/LoRaMac-node/milestone/5) | A/B/C |  LoRaWAN L2 1.0.4 |
+| [develop](https://github.com/Lora-net/LoRaMac-node/tree/develop) | [1.0.4](https://lora-alliance.org/resource-hub) | [2-1.0.1](https://lora-alliance.org/sites/default/files/2020-02/rp_2-1.0.1.pdf) | [v4.5.0-rc.1](https://github.com/Lora-net/LoRaMac-node/releases/tag/v4.5.0-rc.1)/[M 4.5.0](https://github.com/Lora-net/LoRaMac-node/milestone/5) | A/B/C |  LoRaWAN L2 1.0.4 - **_Pre-Released_**|
 | [feature/5.0.0](https://github.com/Lora-net/LoRaMac-node/tree/feature/5.0.0) | [1.0.4](https://lora-alliance.org/resource-hub) / [1.1.1](https://lora-alliance.org/resource-hub/lorawanr-specification-v11) | [2-1.0.1](https://lora-alliance.org/sites/default/files/2020-02/rp_2-1.0.1.pdf) | [M 5.0.0](https://github.com/Lora-net/LoRaMac-node/milestone/3) | A/B/C |  LoRaWAN L2 1.0.4 / 1.1.1 |
 
 This project fully implements ClassA, ClassB and ClassC end-device classes and it also provides SX1272/73, SX1276/77/78/79, SX1261/2 and LR1110 radio drivers.

src/boards/SKiM880B/board.c

@@ -471,7 +471,7 @@ void SysTick_Handler( void )
 
 uint8_t GetBoardPowerSource( void )
 {
-    return BATTERY_POWER;
+    return USB_POWER;
 }
 
 /**

src/boards/SKiM881AXL/board.c

@@ -444,7 +444,7 @@ void SysTick_Handler( void )
 
 uint8_t GetBoardPowerSource( void )
 {
-    return BATTERY_POWER;
+    return USB_POWER;
 }
 
 /**

src/boards/SKiM980A/board.c

@@ -471,7 +471,7 @@ void SysTick_Handler( void )
 
 uint8_t GetBoardPowerSource( void )
 {
-    return BATTERY_POWER;
+    return USB_POWER;
 }
 
 /**