Home G28 not working for Minitronics 2.0 #807
Description
Hello MK team!
I hope you can hell me here.
Issue description
G28 command is not working. If I send it in the terminal the board answers ok and the axis current position but nothing moves.
The axis are moving normally with manual actuation via G code.
I tried to debug myself but #define PINS_DEBUGGING is not compiling due to not supported platform and #define DEBUG_FEATURE is not showing anything extra in the terminal.
Firmware version
4.3.8 (Unfortunately the only one compiling for Minitronics 2.0)
My setup
The printer is a Prusa i3 clone using Cartesian. I use mechanical endstops for X and Y and HAL sensor for Z. I tested them and they are working fine.
Heaters, thermistors, steppers and ventilaros al all operational. The only issue is that when homing nothing is moving.
I do not think my setup changes have anything to do with this. But just in case:
#define MOTHERBOARD BOARD_MINITRONICS_V2
#define SERIAL_PORT_1 -1
#define DEFAULT_AXIS_STEPS_PER_UNIT {160, 160, 8000, 2263.54, 625, 625, 625}
#define DEFAULT_MAX_ACCELERATION {1000, 1000, 50, 1000, 1000, 1000, 1000}
#define DEFAULT_ACCELERATION 1000
#define DEFAULT_XJERK 5.0
#define DEFAULT_YJERK 5.0
#define X_DRIVER_TYPE DRV8825
#define Y_DRIVER_TYPE DRV8825
#define Z_DRIVER_TYPE DRV8825
#define X2_DRIVER_TYPE DRV8825
#define Y2_DRIVER_TYPE DRV8825
#define Z2_DRIVER_TYPE DRV8825
#define Z3_DRIVER_TYPE DRV8825
#define E0_DRIVER_TYPE DRV8825
#define E1_DRIVER_TYPE DRV8825
#define E2_DRIVER_TYPE DRV8825
#define E3_DRIVER_TYPE DRV8825
#define E4_DRIVER_TYPE DRV8825
#define E5_DRIVER_TYPE DRV8825
#define BEZIER_JERK_CONTROL