C plus plus

Author: thinkyhead

Marlin/Configuration.h

@@ -103,7 +103,7 @@
  *
  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  */
-#define SERIAL_PORT 0
+#define SERIAL_PORT -1
 
 /**
  * Select a secondary serial port on the board to use for communication with the host.
@@ -128,11 +128,11 @@
 
 // Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_RAMPS_14_EFB
+  #define MOTHERBOARD BOARD_MALYAN_M200_V2
 #endif
 
 // Name displayed in the LCD "Ready" message and Info menu
-//#define CUSTOM_MACHINE_NAME "3D Printer"
+#define CUSTOM_MACHINE_NAME "STM32F070CB_malyan-tests (1)"
 
 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like https://www.uuidgenerator.net/version4

…SB_Host_Library/Class/MSC/Src/usbh_msc.c …_Host_Library/Class/MSC/Src/usbh_msc.cppMarlin/src/HAL/STM32/usb_hostlib/STM32_USB_Host_Library/Class/MSC/Src/usbh_msc.c renamed to Marlin/src/HAL/STM32/usb_hostlib/STM32_USB_Host_Library/Class/MSC/Src/usbh_msc.cpp Marlin/src/HAL/STM32/usb_hostlib/STM32_USB_Host_Library/Class/MSC/Src/usbh_msc.c renamed to Marlin/src/HAL/STM32/usb_hostlib/STM32_USB_Host_Library/Class/MSC/Src/usbh_msc.cpp

@@ -24,13 +24,13 @@
 
 #if ENABLED(USB_HOST_MSC_FLASH_SUPPORT)
 
+#include "Sd2Card_usbhost_msc.h"
+#include HAL_PATH(../../HAL, usb_hostlib/usbh_usr.h)
+
 #include "../../MarlinCore.h"
 #include "../../core/serial.h"
 #include "../../module/temperature.h"
 
-#include "Sd2Card_usbhost_msc.h"
-#include "../../HAL/STM32/usb_hostlib/usbh_usr.h"
-
 // idle() is always called in Marlin idle()
 void Sd2Card::idle() {
 
@@ -50,7 +50,6 @@ bool Sd2Card::isInserted() {
   return USBH_IsConnected();
 }
 
-
 // Marlin calls this to initialize an SD card once it is inserted.
 bool Sd2Card::init(const uint8_t, const pin_t) {
   return isInserted();