Unable to Connect the HCA's through the link

[solielpai]

I deployed the rdma device plugin in HCA mode in kubernetes cluster. When I tried to make a connection test using "ib_read_bw", the output is as follows:

                RDMA_Write BW Test

Dual-port : OFF Device : mlx5_0
Number of qps : 1 Transport type : IB
Connection type : RC Using SRQ : OFF
TX depth : 128
CQ Moderation : 100
Mtu : 1024[B]
Link type : Ethernet
GID index : 0
Max inline data : 0[B]
rdma_cm QPs : OFF
Data ex. method : Ethernet

---

local address: LID 0000 xxx
GID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
remote address: LID 0000 xxx
GID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00

The commands I used are simply ' ib_write_bw -d mlx5_0 [target_ip]' and 'ib_read_bw -d mlx5_0
'. Could anyone please help with this issue? I appreciate your help.

[goversion]

I meet the same problem as you. Did you finally solve this problem, please?
@solielpai

[huide9]

+1
I'm using connectx-5. all ib_ commands work fine in host to host communication, but failed in containers.

[heshengkai]

@huide9 @solielpai @goversion
+1
I'm using connectx-5. all ib_ commands work fine in host to host communication, but failed in containers,
my k8s cluster network plugin calico， The Infiniband card works in Ethernet mode, which cause problems. If the Infiniband card works in IB mode, it is working properly

[noama-nv]

Link type is Ethernet:
Server: ib_write_bw -d [RDMA_DEVICE] -F -R --report_gbits
Client: ib_write_bw -d [RDMA_DEVICE] [SERVER_IP] -F -R --report_gbits

Link type is IB:
Server: ib_write_bw -d [RDMA_DEVICE] -F --report_gbits
Client: ib_write_bw -d [RDMA_DEVICE] [SERVER_IP] -F --report_gbits

[heshengkai]

Hi @krembu
Server:
[root@mofed-test-cx6-pod-1 /]# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1440
inet 172.16.62.144 netmask 255.255.255.255 broadcast 0.0.0.0
ether 36:bd:a0:74:97:5b txqueuelen 0 (Ethernet)
RX packets 26 bytes 2068 (2.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 19 bytes 1490 (1.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

[root@mofed-test-cx6-pod-1 /]# ib_write_bw -d mlx5_2 -F -R --report_gbits

---

• Waiting for client to connect... *

---

kubectl exec -it mofed-test-cx6-pod-1 bash^C
[root@mofed-test-cx6-pod-1 /]# ib_write_bw -d mlx5_2 -F -R --report_gbits

---

• Waiting for client to connect... *

---

Client:
[root@mofed-test-cx6-pod-2 /]# ib_write_bw -d mlx5_2 172.16.62.144 -F -R --report_gbits
Received 10 times ADDR_ERROR
Unable to perform rdma_client function
Unable to init the socket connection
[root@mofed-test-cx6-pod-2 /]# ping 172.16.62.144
PING 172.16.62.144 (172.16.62.144) 56(84) bytes of data.
64 bytes from 172.16.62.144: icmp_seq=1 ttl=63 time=0.070 ms
64 bytes from 172.16.62.144: icmp_seq=2 ttl=63 time=0.047 ms
64 bytes from 172.16.62.144: icmp_seq=3 ttl=63 time=0.047 ms
^C
--- 172.16.62.144 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2048ms
rtt min/avg/max/mdev = 0.047/0.054/0.070/0.013 ms
[root@mofed-test-cx6-pod-2 /]# ib_write_bw -d mlx5_2 172.16.62.144 -F -R --report_gbits
Received 10 times ADDR_ERROR
Unable to perform rdma_client function
Unable to init the socket connection
[root@mofed-test-cx6-pod-2 /]# ib_write_bw -d mlx5_2 172.16.62.144 -F -R --report_gbits
Received 10 times ADDR_ERROR
Unable to perform rdma_client function
Unable to init the socket connection

[noama-nv]

can you share pod spec and MacvlanNetowrk?

[heshengkai]

The Link type is IB, and the cni is calico or macvlan. Both work properly。
Link type is Ethernet, cni is calico, the test is abnormal. cni is macvlan and the test is normal

[noama-nv]

Sorry getting you working out, this project is deprecated you can use https://github.com/mellanox/k8s-rdma-shared-dev-plugin
or https://docs.nvidia.com/networking/display/COKAN10/Network+Operator

[heshengkai]

https://github.com/mellanox/k8s-rdma-shared-dev-plugin ,That's what I'm using

[heshengkai]

use image: mellanox/k8s-rdma-shared-dev-plugin

[noama-nv]

the issue are on https://github.com/Mellanox/k8s-rdma-sriov-dev-plugin

[heshengkai]

@krembu Thank you for your reply

[wwj-2017-1117]

@huide9 ，we meet the same problem