diff --git a/reference/5.1/Microsoft.PowerShell.Utility/Wait-Debugger.md b/reference/5.1/Microsoft.PowerShell.Utility/Wait-Debugger.md
index 9415567ddf61..a85050c9fa12 100644
--- a/reference/5.1/Microsoft.PowerShell.Utility/Wait-Debugger.md
+++ b/reference/5.1/Microsoft.PowerShell.Utility/Wait-Debugger.md
@@ -2,7 +2,7 @@
 external help file: Microsoft.PowerShell.Commands.Utility.dll-Help.xml
 Locale: en-US
 Module Name: Microsoft.PowerShell.Utility
-ms.date: 12/12/2022
+ms.date: 09/03/2024
 online version: https://learn.microsoft.com/powershell/module/microsoft.powershell.utility/wait-debugger?view=powershell-5.1&WT.mc_id=ps-gethelp
 schema: 2.0.0
 title: Wait-Debugger
@@ -22,17 +22,78 @@ Wait-Debugger [<CommonParameters>]
 ## DESCRIPTION
 
 Stops the PowerShell script execution engine at the point immediately after the `Wait-Debugger`
-cmdlet and waits for a debugger to be attached. This is similar to using
-`Enable-RunspaceDebug -BreakAll` in a DSC resource but breaks at a specific point in the script.
+cmdlet and waits for a debugger to be attached.
 
 > [!CAUTION]
 > Make sure you remove the `Wait-Debugger` lines after you are done. A running script appears to be
-> hung when it is stopped at a `Wait-Debugger`.
+> hung when it's stopped at a `Wait-Debugger`.
+
+For more information about debugging in PowerShell, see
+[about_Debuggers](/powershell/module/microsoft.powershell.core/about/about_debuggers).
 
 ## EXAMPLES
 
 ### Example 1: Insert breakpoint for debugging
 
+The file `dbgtest.ps1` contains a function `Test-Condition`. The `Wait-Debugger` command was
+inserted in the function to stop the script execution at that point. When you run the function, the
+script stops at the `Wait-Debugger` line and enters the command-line debugger. The `l` command lists
+the script lines, and you can use other debugger commands to inspect the script state.
+
+```powershell
+function Test-Condition {
+    [CmdletBinding()]
+    param (
+        [Parameter(Mandatory)]
+        [string]$Name,
+        [string]$Message = "Hello, $Name!"
+    )
+
+    if ($Name -eq $env:USERNAME) {
+        Write-Output "$Message"
+    } else {
+        # Remove after debugging
+        Wait-Debugger
+
+        Write-Output "$Name is not the current user."
+    }
+}
+```
+
+```
+PS D:\> Test-Condition Fred
+Entering debug mode. Use h or ? for help.
+
+At D:\temp\test\dbgtest.ps1:13 char:9
++         Wait-Debugger
++         ~~~~~~~~~~~~~
+[DBG]: PS D:\>> l
+
+    8:
+    9:      if ($Name -eq $env:USERNAME) {
+   10:          Write-Output "$Message"
+   11:      } else {
+   12:          # Remove after debugging
+   13:*         Wait-Debugger
+   14:
+   15:          Write-Output "$Name is not the current user."
+   16:      }
+   17:  }
+
+[DBG]: PS D:\>> $env:USERNAME
+User01
+[DBG]: PS D:\>> exit
+PS D:\>
+```
+
+Notice that output from the `l` shows that the script execution is stopped at the `Wait-Debugger` on
+line 13.
+
+### Example 2: Insert breakpoint for debugging a DSC resource
+
+In this example, the `Wait-Debugger` command was inserted in the `CopyFile` method of a DSC
+resource. This is similar to using `Enable-RunspaceDebug -BreakAll` in a DSC resource but breaks at
+a specific point in the script.
 ```
 [DscResource()]
 class FileResource
@@ -50,76 +111,53 @@ class FileResource
     [Nullable[datetime]] $CreationTime
 
 
-    [void] Set()
-    {
+    [void] Set() {
         $fileExists = $this.TestFilePath($this.Path)
-        if ($this.ensure -eq [Ensure]::Present)
-        {
-            if (! $fileExists)
-            {
+        if ($this.ensure -eq [Ensure]::Present) {
+            if (! $fileExists) {
                $this.CopyFile()
             }
-        }
-        else
-        {
-            if ($fileExists)
-            {
+        } else {
+            if ($fileExists) {
                 Write-Verbose -Message "Deleting the file $($this.Path)"
                 Remove-Item -LiteralPath $this.Path -Force
             }
         }
     }
 
-    [bool] Test()
-    {
+    [bool] Test() {
         $present = Test-Path -LiteralPath $this.Path
-
-        if ($this.Ensure -eq [Ensure]::Present)
-        {
+        if ($this.Ensure -eq [Ensure]::Present) {
             return $present
-        }
-        else
-        {
+        } else {
             return (! $present)
         }
     }
 
-    [FileResource] Get()
-    {
+    [FileResource] Get() {
         $present = Test-Path -Path $this.Path
-
-        if ($present)
-        {
+        if ($present) {
             $file = Get-ChildItem -LiteralPath $this.Path
             $this.CreationTime = $file.CreationTime
             $this.Ensure = [Ensure]::Present
-        }
-        else
-        {
+        } else {
             $this.CreationTime = $null
             $this.Ensure = [Ensure]::Absent
         }
-
         return $this
     }
 
-    [void] CopyFile()
-    {
+    [void] CopyFile() {
         # Testing only - Remove before deployment!
         Wait-Debugger
 
-        if (! (Test-Path -LiteralPath $this.SourcePath))
-        {
+        if (! (Test-Path -LiteralPath $this.SourcePath)) {
             throw "SourcePath $($this.SourcePath) is not found."
         }
-
-        if (Test-Path -LiteralPath $this.Path -PathType Container)
-        {
+        if (Test-Path -LiteralPath $this.Path -PathType Container) {
             throw "Path $($this.Path) is a directory path"
         }
-
         Write-Verbose "Copying $($this.SourcePath) to $($this.Path)"
-
         Copy-Item -LiteralPath $this.SourcePath -Destination $this.Path -Force
     }
 }
@@ -131,7 +169,8 @@ class FileResource
 
 This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable,
 -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose,
--WarningAction, and -WarningVariable. For more information, see [about_CommonParameters](../Microsoft.PowerShell.Core/About/about_CommonParameters.md).
+-WarningAction, and -WarningVariable. For more information, see
+[about_CommonParameters](../Microsoft.PowerShell.Core/About/about_CommonParameters.md).
 
 ## INPUTS
 
@@ -150,3 +189,5 @@ This cmdlet returns no output.
 ## RELATED LINKS
 
 [Enable-DscDebug](/powershell/module/PSDesiredStateConfiguration/Enable-DscDebug)
+
+[about_Debuggers](/powershell/module/microsoft.powershell.core/about/about_debuggers)
diff --git a/reference/7.2/Microsoft.PowerShell.Utility/Wait-Debugger.md b/reference/7.2/Microsoft.PowerShell.Utility/Wait-Debugger.md
index 3b1672ed7068..9bf72c37e473 100644
--- a/reference/7.2/Microsoft.PowerShell.Utility/Wait-Debugger.md
+++ b/reference/7.2/Microsoft.PowerShell.Utility/Wait-Debugger.md
@@ -2,7 +2,7 @@
 external help file: Microsoft.PowerShell.Commands.Utility.dll-Help.xml
 Locale: en-US
 Module Name: Microsoft.PowerShell.Utility
-ms.date: 12/12/2022
+ms.date: 09/03/2024
 online version: https://learn.microsoft.com/powershell/module/microsoft.powershell.utility/wait-debugger?view=powershell-7.2&WT.mc_id=ps-gethelp
 schema: 2.0.0
 title: Wait-Debugger
@@ -22,17 +22,78 @@ Wait-Debugger [<CommonParameters>]
 ## DESCRIPTION
 
 Stops the PowerShell script execution engine at the point immediately after the `Wait-Debugger`
-cmdlet and waits for a debugger to be attached. This is similar to using
-`Enable-RunspaceDebug -BreakAll` in a DSC resource but breaks at a specific point in the script.
+cmdlet and waits for a debugger to be attached.
 
 > [!CAUTION]
 > Make sure you remove the `Wait-Debugger` lines after you are done. A running script appears to be
-> hung when it is stopped at a `Wait-Debugger`.
+> hung when it's stopped at a `Wait-Debugger`.
+
+For more information about debugging in PowerShell, see
+[about_Debuggers](/powershell/module/microsoft.powershell.core/about/about_debuggers).
 
 ## EXAMPLES
 
 ### Example 1: Insert breakpoint for debugging
 
+The file `dbgtest.ps1` contains a function `Test-Condition`. The `Wait-Debugger` command was
+inserted in the function to stop the script execution at that point. When you run the function, the
+script stops at the `Wait-Debugger` line and enters the command-line debugger. The `l` command lists
+the script lines, and you can use other debugger commands to inspect the script state.
+
+```powershell
+function Test-Condition {
+    [CmdletBinding()]
+    param (
+        [Parameter(Mandatory)]
+        [string]$Name,
+        [string]$Message = "Hello, $Name!"
+    )
+
+    if ($Name -eq $env:USERNAME) {
+        Write-Output "$Message"
+    } else {
+        # Remove after debugging
+        Wait-Debugger
+
+        Write-Output "$Name is not the current user."
+    }
+}
+```
+
+```
+PS D:\> Test-Condition Fred
+Entering debug mode. Use h or ? for help.
+
+At D:\temp\test\dbgtest.ps1:13 char:9
++         Wait-Debugger
++         ~~~~~~~~~~~~~
+[DBG]: PS D:\>> l
+
+    8:
+    9:      if ($Name -eq $env:USERNAME) {
+   10:          Write-Output "$Message"
+   11:      } else {
+   12:          # Remove after debugging
+   13:*         Wait-Debugger
+   14:
+   15:          Write-Output "$Name is not the current user."
+   16:      }
+   17:  }
+
+[DBG]: PS D:\>> $env:USERNAME
+User01
+[DBG]: PS D:\>> exit
+PS D:\>
+```
+
+Notice that output from the `l` shows that the script execution is stopped at the `Wait-Debugger` on
+line 13.
+
+### Example 2: Insert breakpoint for debugging a DSC resource
+
+In this example, the `Wait-Debugger` command was inserted in the `CopyFile` method of a DSC
+resource. This is similar to using `Enable-RunspaceDebug -BreakAll` in a DSC resource but breaks at
+a specific point in the script.
 ```
 [DscResource()]
 class FileResource
@@ -50,76 +111,53 @@ class FileResource
     [Nullable[datetime]] $CreationTime
 
 
-    [void] Set()
-    {
+    [void] Set() {
         $fileExists = $this.TestFilePath($this.Path)
-        if ($this.ensure -eq [Ensure]::Present)
-        {
-            if (! $fileExists)
-            {
+        if ($this.ensure -eq [Ensure]::Present) {
+            if (! $fileExists) {
                $this.CopyFile()
             }
-        }
-        else
-        {
-            if ($fileExists)
-            {
+        } else {
+            if ($fileExists) {
                 Write-Verbose -Message "Deleting the file $($this.Path)"
                 Remove-Item -LiteralPath $this.Path -Force
             }
         }
     }
 
-    [bool] Test()
-    {
+    [bool] Test() {
         $present = Test-Path -LiteralPath $this.Path
-
-        if ($this.Ensure -eq [Ensure]::Present)
-        {
+        if ($this.Ensure -eq [Ensure]::Present) {
             return $present
-        }
-        else
-        {
+        } else {
             return (! $present)
         }
     }
 
-    [FileResource] Get()
-    {
+    [FileResource] Get() {
         $present = Test-Path -Path $this.Path
-
-        if ($present)
-        {
+        if ($present) {
             $file = Get-ChildItem -LiteralPath $this.Path
             $this.CreationTime = $file.CreationTime
             $this.Ensure = [Ensure]::Present
-        }
-        else
-        {
+        } else {
             $this.CreationTime = $null
             $this.Ensure = [Ensure]::Absent
         }
-
         return $this
     }
 
-    [void] CopyFile()
-    {
+    [void] CopyFile() {
         # Testing only - Remove before deployment!
         Wait-Debugger
 
-        if (! (Test-Path -LiteralPath $this.SourcePath))
-        {
+        if (! (Test-Path -LiteralPath $this.SourcePath)) {
             throw "SourcePath $($this.SourcePath) is not found."
         }
-
-        if (Test-Path -LiteralPath $this.Path -PathType Container)
-        {
+        if (Test-Path -LiteralPath $this.Path -PathType Container) {
             throw "Path $($this.Path) is a directory path"
         }
-
         Write-Verbose "Copying $($this.SourcePath) to $($this.Path)"
-
         Copy-Item -LiteralPath $this.SourcePath -Destination $this.Path -Force
     }
 }
@@ -131,7 +169,8 @@ class FileResource
 
 This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable,
 -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose,
--WarningAction, and -WarningVariable. For more information, see [about_CommonParameters](../Microsoft.PowerShell.Core/About/about_CommonParameters.md).
+-WarningAction, and -WarningVariable. For more information, see
+[about_CommonParameters](../Microsoft.PowerShell.Core/About/about_CommonParameters.md).
 
 ## INPUTS
 
@@ -150,3 +189,5 @@ This cmdlet returns no output.
 ## RELATED LINKS
 
 [Enable-DscDebug](/powershell/module/PSDesiredStateConfiguration/Enable-DscDebug)
+
+[about_Debuggers](/powershell/module/microsoft.powershell.core/about/about_debuggers)
diff --git a/reference/7.4/Microsoft.PowerShell.Utility/Wait-Debugger.md b/reference/7.4/Microsoft.PowerShell.Utility/Wait-Debugger.md
index 9815a9a3d5fa..276dfe784e19 100644
--- a/reference/7.4/Microsoft.PowerShell.Utility/Wait-Debugger.md
+++ b/reference/7.4/Microsoft.PowerShell.Utility/Wait-Debugger.md
@@ -2,7 +2,7 @@
 external help file: Microsoft.PowerShell.Commands.Utility.dll-Help.xml
 Locale: en-US
 Module Name: Microsoft.PowerShell.Utility
-ms.date: 12/12/2022
+ms.date: 09/03/2024
 online version: https://learn.microsoft.com/powershell/module/microsoft.powershell.utility/wait-debugger?view=powershell-7.4&WT.mc_id=ps-gethelp
 schema: 2.0.0
 title: Wait-Debugger
@@ -22,17 +22,78 @@ Wait-Debugger [<CommonParameters>]
 ## DESCRIPTION
 
 Stops the PowerShell script execution engine at the point immediately after the `Wait-Debugger`
-cmdlet and waits for a debugger to be attached. This is similar to using
-`Enable-RunspaceDebug -BreakAll` in a DSC resource but breaks at a specific point in the script.
+cmdlet and waits for a debugger to be attached.
 
 > [!CAUTION]
 > Make sure you remove the `Wait-Debugger` lines after you are done. A running script appears to be
-> hung when it is stopped at a `Wait-Debugger`.
+> hung when it's stopped at a `Wait-Debugger`.
+
+For more information about debugging in PowerShell, see
+[about_Debuggers](/powershell/module/microsoft.powershell.core/about/about_debuggers).
 
 ## EXAMPLES
 
 ### Example 1: Insert breakpoint for debugging
 
+The file `dbgtest.ps1` contains a function `Test-Condition`. The `Wait-Debugger` command was
+inserted in the function to stop the script execution at that point. When you run the function, the
+script stops at the `Wait-Debugger` line and enters the command-line debugger. The `l` command lists
+the script lines, and you can use other debugger commands to inspect the script state.
+
+```powershell
+function Test-Condition {
+    [CmdletBinding()]
+    param (
+        [Parameter(Mandatory)]
+        [string]$Name,
+        [string]$Message = "Hello, $Name!"
+    )
+
+    if ($Name -eq $env:USERNAME) {
+        Write-Output "$Message"
+    } else {
+        # Remove after debugging
+        Wait-Debugger
+
+        Write-Output "$Name is not the current user."
+    }
+}
+```
+
+```
+PS D:\> Test-Condition Fred
+Entering debug mode. Use h or ? for help.
+
+At D:\temp\test\dbgtest.ps1:13 char:9
++         Wait-Debugger
++         ~~~~~~~~~~~~~
+[DBG]: PS D:\>> l
+
+    8:
+    9:      if ($Name -eq $env:USERNAME) {
+   10:          Write-Output "$Message"
+   11:      } else {
+   12:          # Remove after debugging
+   13:*         Wait-Debugger
+   14:
+   15:          Write-Output "$Name is not the current user."
+   16:      }
+   17:  }
+
+[DBG]: PS D:\>> $env:USERNAME
+User01
+[DBG]: PS D:\>> exit
+PS D:\>
+```
+
+Notice that output from the `l` shows that the script execution is stopped at the `Wait-Debugger` on
+line 13.
+
+### Example 2: Insert breakpoint for debugging a DSC resource
+
+In this example, the `Wait-Debugger` command was inserted in the `CopyFile` method of a DSC
+resource. This is similar to using `Enable-RunspaceDebug -BreakAll` in a DSC resource but breaks at
+a specific point in the script.
 ```
 [DscResource()]
 class FileResource
@@ -50,76 +111,53 @@ class FileResource
     [Nullable[datetime]] $CreationTime
 
 
-    [void] Set()
-    {
+    [void] Set() {
         $fileExists = $this.TestFilePath($this.Path)
-        if ($this.ensure -eq [Ensure]::Present)
-        {
-            if (! $fileExists)
-            {
+        if ($this.ensure -eq [Ensure]::Present) {
+            if (! $fileExists) {
                $this.CopyFile()
             }
-        }
-        else
-        {
-            if ($fileExists)
-            {
+        } else {
+            if ($fileExists) {
                 Write-Verbose -Message "Deleting the file $($this.Path)"
                 Remove-Item -LiteralPath $this.Path -Force
             }
         }
     }
 
-    [bool] Test()
-    {
+    [bool] Test() {
         $present = Test-Path -LiteralPath $this.Path
-
-        if ($this.Ensure -eq [Ensure]::Present)
-        {
+        if ($this.Ensure -eq [Ensure]::Present) {
             return $present
-        }
-        else
-        {
+        } else {
             return (! $present)
         }
     }
 
-    [FileResource] Get()
-    {
+    [FileResource] Get() {
         $present = Test-Path -Path $this.Path
-
-        if ($present)
-        {
+        if ($present) {
             $file = Get-ChildItem -LiteralPath $this.Path
             $this.CreationTime = $file.CreationTime
             $this.Ensure = [Ensure]::Present
-        }
-        else
-        {
+        } else {
             $this.CreationTime = $null
             $this.Ensure = [Ensure]::Absent
         }
-
         return $this
     }
 
-    [void] CopyFile()
-    {
+    [void] CopyFile() {
         # Testing only - Remove before deployment!
         Wait-Debugger
 
-        if (! (Test-Path -LiteralPath $this.SourcePath))
-        {
+        if (! (Test-Path -LiteralPath $this.SourcePath)) {
             throw "SourcePath $($this.SourcePath) is not found."
         }
-
-        if (Test-Path -LiteralPath $this.Path -PathType Container)
-        {
+        if (Test-Path -LiteralPath $this.Path -PathType Container) {
             throw "Path $($this.Path) is a directory path"
         }
-
         Write-Verbose "Copying $($this.SourcePath) to $($this.Path)"
-
         Copy-Item -LiteralPath $this.SourcePath -Destination $this.Path -Force
     }
 }
@@ -131,7 +169,8 @@ class FileResource
 
 This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable,
 -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose,
--WarningAction, and -WarningVariable. For more information, see [about_CommonParameters](../Microsoft.PowerShell.Core/About/about_CommonParameters.md).
+-WarningAction, and -WarningVariable. For more information, see
+[about_CommonParameters](../Microsoft.PowerShell.Core/About/about_CommonParameters.md).
 
 ## INPUTS
 
@@ -150,3 +189,5 @@ This cmdlet returns no output.
 ## RELATED LINKS
 
 [Enable-DscDebug](/powershell/module/PSDesiredStateConfiguration/Enable-DscDebug)
+
+[about_Debuggers](/powershell/module/microsoft.powershell.core/about/about_debuggers)
diff --git a/reference/7.5/Microsoft.PowerShell.Utility/Wait-Debugger.md b/reference/7.5/Microsoft.PowerShell.Utility/Wait-Debugger.md
index 6c3fcba35182..12f36c330446 100644
--- a/reference/7.5/Microsoft.PowerShell.Utility/Wait-Debugger.md
+++ b/reference/7.5/Microsoft.PowerShell.Utility/Wait-Debugger.md
@@ -2,7 +2,7 @@
 external help file: Microsoft.PowerShell.Commands.Utility.dll-Help.xml
 Locale: en-US
 Module Name: Microsoft.PowerShell.Utility
-ms.date: 12/12/2022
+ms.date: 09/03/2024
 online version: https://learn.microsoft.com/powershell/module/microsoft.powershell.utility/wait-debugger?view=powershell-7.5&WT.mc_id=ps-gethelp
 schema: 2.0.0
 title: Wait-Debugger
@@ -22,17 +22,78 @@ Wait-Debugger [<CommonParameters>]
 ## DESCRIPTION
 
 Stops the PowerShell script execution engine at the point immediately after the `Wait-Debugger`
-cmdlet and waits for a debugger to be attached. This is similar to using
-`Enable-RunspaceDebug -BreakAll` in a DSC resource but breaks at a specific point in the script.
+cmdlet and waits for a debugger to be attached.
 
 > [!CAUTION]
 > Make sure you remove the `Wait-Debugger` lines after you are done. A running script appears to be
-> hung when it is stopped at a `Wait-Debugger`.
+> hung when it's stopped at a `Wait-Debugger`.
+
+For more information about debugging in PowerShell, see
+[about_Debuggers](/powershell/module/microsoft.powershell.core/about/about_debuggers).
 
 ## EXAMPLES
 
 ### Example 1: Insert breakpoint for debugging
 
+The file `dbgtest.ps1` contains a function `Test-Condition`. The `Wait-Debugger` command was
+inserted in the function to stop the script execution at that point. When you run the function, the
+script stops at the `Wait-Debugger` line and enters the command-line debugger. The `l` command lists
+the script lines, and you can use other debugger commands to inspect the script state.
+
+```powershell
+function Test-Condition {
+    [CmdletBinding()]
+    param (
+        [Parameter(Mandatory)]
+        [string]$Name,
+        [string]$Message = "Hello, $Name!"
+    )
+
+    if ($Name -eq $env:USERNAME) {
+        Write-Output "$Message"
+    } else {
+        # Remove after debugging
+        Wait-Debugger
+
+        Write-Output "$Name is not the current user."
+    }
+}
+```
+
+```
+PS D:\> Test-Condition Fred
+Entering debug mode. Use h or ? for help.
+
+At D:\temp\test\dbgtest.ps1:13 char:9
++         Wait-Debugger
++         ~~~~~~~~~~~~~
+[DBG]: PS D:\>> l
+
+    8:
+    9:      if ($Name -eq $env:USERNAME) {
+   10:          Write-Output "$Message"
+   11:      } else {
+   12:          # Remove after debugging
+   13:*         Wait-Debugger
+   14:
+   15:          Write-Output "$Name is not the current user."
+   16:      }
+   17:  }
+
+[DBG]: PS D:\>> $env:USERNAME
+User01
+[DBG]: PS D:\>> exit
+PS D:\>
+```
+
+Notice that output from the `l` shows that the script execution is stopped at the `Wait-Debugger` on
+line 13.
+
+### Example 2: Insert breakpoint for debugging a DSC resource
+
+In this example, the `Wait-Debugger` command was inserted in the `CopyFile` method of a DSC
+resource. This is similar to using `Enable-RunspaceDebug -BreakAll` in a DSC resource but breaks at
+a specific point in the script.
 ```
 [DscResource()]
 class FileResource
@@ -50,76 +111,53 @@ class FileResource
     [Nullable[datetime]] $CreationTime
 
 
-    [void] Set()
-    {
+    [void] Set() {
         $fileExists = $this.TestFilePath($this.Path)
-        if ($this.ensure -eq [Ensure]::Present)
-        {
-            if (! $fileExists)
-            {
+        if ($this.ensure -eq [Ensure]::Present) {
+            if (! $fileExists) {
                $this.CopyFile()
             }
-        }
-        else
-        {
-            if ($fileExists)
-            {
+        } else {
+            if ($fileExists) {
                 Write-Verbose -Message "Deleting the file $($this.Path)"
                 Remove-Item -LiteralPath $this.Path -Force
             }
         }
     }
 
-    [bool] Test()
-    {
+    [bool] Test() {
         $present = Test-Path -LiteralPath $this.Path
-
-        if ($this.Ensure -eq [Ensure]::Present)
-        {
+        if ($this.Ensure -eq [Ensure]::Present) {
             return $present
-        }
-        else
-        {
+        } else {
             return (! $present)
         }
     }
 
-    [FileResource] Get()
-    {
+    [FileResource] Get() {
         $present = Test-Path -Path $this.Path
-
-        if ($present)
-        {
+        if ($present) {
             $file = Get-ChildItem -LiteralPath $this.Path
             $this.CreationTime = $file.CreationTime
             $this.Ensure = [Ensure]::Present
-        }
-        else
-        {
+        } else {
             $this.CreationTime = $null
             $this.Ensure = [Ensure]::Absent
         }
-
         return $this
     }
 
-    [void] CopyFile()
-    {
+    [void] CopyFile() {
         # Testing only - Remove before deployment!
         Wait-Debugger
 
-        if (! (Test-Path -LiteralPath $this.SourcePath))
-        {
+        if (! (Test-Path -LiteralPath $this.SourcePath)) {
             throw "SourcePath $($this.SourcePath) is not found."
         }
-
-        if (Test-Path -LiteralPath $this.Path -PathType Container)
-        {
+        if (Test-Path -LiteralPath $this.Path -PathType Container) {
             throw "Path $($this.Path) is a directory path"
         }
-
         Write-Verbose "Copying $($this.SourcePath) to $($this.Path)"
-
         Copy-Item -LiteralPath $this.SourcePath -Destination $this.Path -Force
     }
 }
@@ -131,7 +169,8 @@ class FileResource
 
 This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable,
 -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose,
--WarningAction, and -WarningVariable. For more information, see [about_CommonParameters](../Microsoft.PowerShell.Core/About/about_CommonParameters.md).
+-WarningAction, and -WarningVariable. For more information, see
+[about_CommonParameters](../Microsoft.PowerShell.Core/About/about_CommonParameters.md).
 
 ## INPUTS
 
@@ -150,3 +189,5 @@ This cmdlet returns no output.
 ## RELATED LINKS
 
 [Enable-DscDebug](/powershell/module/PSDesiredStateConfiguration/Enable-DscDebug)
+
+[about_Debuggers](/powershell/module/microsoft.powershell.core/about/about_debuggers)