Update troubleshoot-linux-rhui-certificate-issues.md

Author: msaenzbosupport

support/azure/virtual-machines/linux/troubleshoot-linux-rhui-certificate-issues.md

@@ -205,13 +205,13 @@ Use the following index to jump directly to the corresponding section below.
 - [RHEL 9.x - RHEL-HA](#tab/rhel9-rhel-ha-eus)
 
 
-#### EUS RHUI package installation
-<a id="eus"></a>
+#### <a id="eus"></a> EUS RHUI package installation 
+
 
 Select the tab of an EUS image type to see the corresponding instructions.
 
-#### [RHEL 8.x - EUS](#tab/rhel8-eus)
-<a id="tab/rhel8-eus"></a>
+#### <a id="tab/rhel8-eus"></a> [RHEL 8.x - EUS](#tab/rhel8-eus)
+
 
 1. Create a config file by using this command.
 
@@ -242,8 +242,8 @@ Select the tab of an EUS image type to see the corresponding instructions.
    sudo rhel8-eus.config
    ```
 
-#### [RHEL 9.x - EUS](#tab/rhel9-eus)
-<a id="tab/rhel9-eus"></a>
+#### <a id="tab/rhel9-eus"></a> [RHEL 9.x - EUS](#tab/rhel9-eus)
+
 
 1. Create a config file by using this command: 
 
@@ -288,13 +288,13 @@ Select the tab of an EUS image type to see the corresponding instructions.
 >
 > Replace `rhelX-XX-XX.config` and `rhui-azure-rhel-X-X-X` with the actual values, as appropriate.
 
-#### Non-EUS RHUI package installation
-<a id="non-eus"></a>
+#### <a id="non-eus"></a> Non-EUS RHUI package installation
+
 
 Select the tab of an Non-EUS image type to see the corresponding instructions.
 
-#### [RHEL 7.9 - non-EUS](#tab/rhel7-noneus)
-<a id="tab/rhel7-noneus"></a>
+#### <a id="tab/rhel7-noneus"></a> [RHEL 7.9 - non-EUS](#tab/rhel7-noneus)
+
 
 1. Remove the releasever file if it exists.
 
@@ -325,8 +325,8 @@ Select the tab of an Non-EUS image type to see the corresponding instructions.
    sudo rm rhel7-non-eus.config
    ```
 
-#### [RHEL 8.10 - non-EUS](#tab/rhel8-noneus)
-<a id="tab/rhel8-noneus"></a>
+#### <a id="tab/rhel8-noneus"></a> [RHEL 8.10 - non-EUS](#tab/rhel8-noneus)
+
 
 1. Remove the releasever file if it exists.
 
@@ -357,8 +357,8 @@ Select the tab of an Non-EUS image type to see the corresponding instructions.
    sudo rm rhel8-non-eus.config
    ```
 
-#### [RHEL 9._x_ - non-EUS](#tab/rhel9-noneus)
-<a id="tab/rhel9-noneus"></a>
+#### <a id="tab/rhel9-noneus"></a> [RHEL 9._x_ - non-EUS](#tab/rhel9-noneus)
+
 
 1. Remove the releasever file if it exists.
 
@@ -389,8 +389,8 @@ Select the tab of an Non-EUS image type to see the corresponding instructions.
    sudo rm rhel9-non-eus.config
    ```
 
-#### [RHEL 10 - non-EUS](#tab/rhel10-noneus)
-<a id="tab/rhel10-noneus"></a>
+#### <a id="tab/rhel10-noneus"></a> [RHEL 10 - non-EUS](#tab/rhel10-noneus)
+
 
 1. Create a config file by using this command:
 
@@ -430,14 +430,14 @@ Select the tab of an Non-EUS image type to see the corresponding instructions.
 > Replace `rhelX-XX-XX.config` and `rhui-azure-rhel-X-X-X` with the actual values, as appropriate.
 
 
-#### RHEL 7 SAP/E4S/HANA RHUI package installation
-<a id="rhel79sap"></a>
+#### <a id="rhel79sap"></a>  RHEL 7 SAP/E4S/HANA RHUI package installation
+
 
 Select the tab of an SAP image type to see the corresponding instructions.
 
 
-#### [RHEL 7.9 - RHEL-SAP-APPS-BASE](#tab/rhel79-rhel-sap-apps-base)
-<a id="tab/rhel79-rhel-sap-apps-base"></a>
+#### <a id="tab/rhel79-rhel-sap-apps-base"></a> [RHEL 7.9 - RHEL-SAP-APPS-BASE](#tab/rhel79-rhel-sap-apps-base)
+
 
 The following steps apply if the OS version is *RHEL 7.9* and the VM was created by using the `RHEL-SAP-APPS` offer image.
 
@@ -472,8 +472,8 @@ The following steps apply if the OS version is *RHEL 7.9* and the VM was created
    ```
 
    
-#### [RHEL 7.9 - RHEL-SAP-HA-BASE](#tab/rhe79-rhel-sap-ha-base)
-<a id="tab/rhel79-rhel-sap-ha-base"></a>
+#### <a id="tab/rhel79-rhel-sap-ha-base"></a> [RHEL 7.9 - RHEL-SAP-HA-BASE](#tab/rhe79-rhel-sap-ha-base)
+
 
 The following steps apply if the OS version is *RHEL 7.9* and the VM was created by using the `RHEL-SAP-HA` offer image.
 
@@ -520,13 +520,13 @@ The following steps apply if the OS version is *RHEL 7.9* and the VM was created
 > Replace `rhelX-XX-XX.config` and `rhui-azure-rhel-X-X-X` with the actual values, as appropriate.
 
 
-#### RHEL 8 SAP/E4S/HANA RHUI package installation
-<a id="rhel8sap"></a>
+#### <a id="rhel8sap"></a> RHEL 8 SAP/E4S/HANA RHUI package installation
+
 
 Select the tab of an SAP image type to see the corresponding instructions.
 
-#### [RHEL 8.x - RHEL-SAP-APPS](#tab/rhel8-rhel-sap-apps)
-<a id="tab/rhel8-rhel-sap-apps"></a>
+#### <a id="tab/rhel8-rhel-sap-apps"></a> [RHEL 8.x - RHEL-SAP-APPS](#tab/rhel8-rhel-sap-apps)
+
 
 The following steps apply if the OS version is *earlier than the latest version available* supported by SAP for `RHEL 8.X` and the VM was created by using the `RHEL-SAP-APPS` offer image.
 
@@ -561,8 +561,8 @@ The following steps apply if the OS version is *earlier than the latest version
    ```
 
 
-#### [RHEL 8.10 - RHEL-SAP-APPS-BASE](#tab/rhel810-rhel-sap-apps-base)
-<a id="tab/rhel810-rhel-sap-apps-base"></a>
+#### <a id="tab/rhel810-rhel-sap-apps-base"></a> [RHEL 8.10 - RHEL-SAP-APPS-BASE](#tab/rhel810-rhel-sap-apps-base)
+
 
 The following steps apply if the OS version is *RHEL 8.10* supported by SAP and the VM was created by using the `RHEL-SAP-APPS` offer image.
 
@@ -596,8 +596,8 @@ The following steps apply if the OS version is *RHEL 8.10* supported by SAP and
    sudo rm rhel8-base-sap-apps.config
    ```
    
-#### [RHEL 8.x - RHEL-SAP-HA (E4S)](#tab/rhel8-rhel-sap-ha-e4s)
-<a id="tab/rhel8-rhel-sap-ha-e4s"></a>
+#### <a id="tab/rhel8-rhel-sap-ha-e4s"></a> [RHEL 8.x - RHEL-SAP-HA (E4S)](#tab/rhel8-rhel-sap-ha-e4s)
+
 The following steps apply if the OS version is *earlier than the latest version available* supported by SAP for `RHEL 8._x_` and the VM was created by using the `RHEL-SAP-HA` offer image.
 
 1. Create a config file by using this command:
@@ -630,8 +630,8 @@ The following steps apply if the OS version is *earlier than the latest version
    sudo rm rhel8-sap-ha.config
    ```
 
-#### [RHEL 8.10 - RHEL-SAP-HA-BASE](#tab/rhe810-rhel-sap-ha-base)
-<a id="tab/rhel810-rhel-sap-ha-base"></a>
+#### <a id="tab/rhel810-rhel-sap-ha-base"></a> [RHEL 8.10 - RHEL-SAP-HA-BASE](#tab/rhe810-rhel-sap-ha-base)
+
 
 The following steps apply if the OS version is *RHEL 8.10* and the VM was created by using the `RHEL-SAP-HA` offer image.
 
@@ -666,8 +666,8 @@ The following steps apply if the OS version is *RHEL 8.10* and the VM was create
    sudo rm rhel8-base-sap-ha.config
    ```
 
-#### [RHEL 8.x - RHEL-HA ](#tab/rhel8-rhel-ha-eus)
-<a id="tab/rhel8-rhel-ha-eus"></a>
+#### <a id="tab/rhel8-rhel-ha-eus"></a> [RHEL 8.x - RHEL-HA ](#tab/rhel8-rhel-ha-eus)
+
 
 1. Create a config file by using this command:
 
@@ -699,8 +699,8 @@ The following steps apply if the OS version is *RHEL 8.10* and the VM was create
    sudo rm  rhel8-ha.config
    ```
 
-#### [RHEL 8.10 - RHEL-HA-BASE](#tab/rhe810-rhel-ha-base)
-<a id="tab/rhel810-rhel-ha-base"></a>
+#### <a id="tab/rhel810-rhel-ha-base"></a> [RHEL 8.10 - RHEL-HA-BASE](#tab/rhe810-rhel-ha-base)
+
 
 
 1. Remove the releasever file if it exists:
@@ -752,13 +752,13 @@ The following steps apply if the OS version is *RHEL 8.10* and the VM was create
 > Replace `rhelX-XX-XX.config` and `rhui-azure-rhel-X-X-X` with the actual values, as appropriate.
 
 
-#### RHEL 9 SAP/E4S/HA RHUI package installation
-<a id="rhel9sap"></a>
+#### <a id="rhel9sap"></a> RHEL 9 SAP/E4S/HA RHUI package installation
+
 
 Select the tab of an SAP image type to see the corresponding instructions.
 
-#### [RHEL 9.x - RHEL-SAP-APPS](#tab/rhel9-rhel-sap-apps)
-<a id="tab/rhel9-rhel-sap-apps"></a>
+#### <a id="tab/rhel9-rhel-sap-apps"></a> [RHEL 9.x - RHEL-SAP-APPS](#tab/rhel9-rhel-sap-apps)
+
 
 The following steps apply if the OS version is *earlier than the latest version that's available* that's supported by SAP for `RHEL 9.0`, and if the VM was created by using the `RHEL-SAP-APPS` offer image.
 
@@ -792,8 +792,8 @@ The following steps apply if the OS version is *earlier than the latest version
    sudo rm  rhel9-sapapps.config
    ```
 
-#### [RHEL 9.x - RHEL-SAP-HA (E4S)](#tab/rhel9-rhel-sap-ha-e4s)
-<a id="tab/rhel9-rhel-sap-ha-e4s"></a>
+#### <a id="tab/rhel9-rhel-sap-ha-e4s"></a> [RHEL 9.x - RHEL-SAP-HA (E4S)](#tab/rhel9-rhel-sap-ha-e4s)
+
 
 
 The following steps apply if the OS version is *earlier than the latest version available* that's supported by SAP for `RHEL 9.0`, and if the VM was created by using the `RHEL-SAP-HA` offer image.
@@ -828,8 +828,8 @@ The following steps apply if the OS version is *earlier than the latest version
    sudo rm  rhel9-sap-ha.config
    ```
 
-#### [RHEL 9.x - RHEL-HA ](#tab/rhel9-rhel-ha-eus)
-<a id="tab/rhel9-rhel-ha-eus"></a>
+#### <a id="tab/rhel9-rhel-ha-eus"></a> [RHEL 9.x - RHEL-HA ](#tab/rhel9-rhel-ha-eus)
+
 
 1. Create a config file by using this command: