pencil edits

Author: cherylmc

articles/networking/fundamentals/networking-overview.md

@@ -46,7 +46,7 @@ VPN Gateway helps you create encrypted cross-premises connections to your virtua
 
 The following diagram illustrates multiple site-to-site VPN connections to the same virtual network. To view more connection diagrams, see [VPN Gateway - design](../../vpn-gateway/design.md). For more information about VPN Gateway, see [What is VPN Gateway?](../../vpn-gateway/vpn-gateway-about-vpngateways.md)
 
-:::image type="content" source="../../vpn-gateway/media/design/multi-site.png" alt-text="Multiple site-to-site Azure VPN Gateway connections.":::
+:::image type="content" source="../../vpn-gateway/media/design/multi-site.png" alt-text="Diagram showing multiple site-to-site Azure VPN Gateway connections.":::
 
 ### <a name="virtualwan"></a>Virtual WAN
 Azure Virtual WAN is a networking service that brings many networking, security, and routing functionalities together to provide a single operational interface. Connectivity to Azure VNets is established by using virtual network connections. Some of the main features include:

articles/vpn-gateway/design.md

@@ -16,13 +16,13 @@ It's important to know that there are different configurations available for VPN
 
 A Site-to-site (S2S) VPN gateway connection is a connection over IPsec/IKE (IKEv1 or IKEv2) VPN tunnel. S2S connections can be used for cross-premises and hybrid configurations. A S2S connection requires a VPN device located on-premises that has a public IP address assigned to it. For information about selecting a VPN device, see the [VPN Gateway FAQ - VPN devices](vpn-gateway-vpn-faq.md#s2s).
 
-:::image type="content" source="./media/tutorial-site-to-site-portal/diagram.png" alt-text="Site-to-site VPN Gateway cross-premises connection diagram." lightbox="./media/tutorial-site-to-site-portal/diagram.png":::
+:::image type="content" source="./media/tutorial-site-to-site-portal/diagram.png" alt-text="Diagram of site-to-site VPN Gateway cross-premises connections." lightbox="./media/tutorial-site-to-site-portal/diagram.png":::
 
 VPN Gateway can be configured in active-standby mode using one public IP or in active-active mode using two public IPs. In active-standby mode, one IPsec tunnel is active and the other tunnel is in standby. In this setup, traffic flows through the active tunnel, and if some issue happens with this tunnel, the traffic switches over to the standby tunnel. Setting up VPN Gateway in active-active mode is *recommended* in which both the IPsec tunnels are simultaneously active, with data flowing through both tunnels at the same time. An additional advantage of active-active mode is that customers experience higher throughputs.
 
 You can create more than one VPN connection from your virtual network gateway, typically connecting to multiple on-premises sites. When working with multiple connections, you must use a RouteBased VPN type (known as a dynamic gateway when working with classic VNets). Because each virtual network can only have one VPN gateway, all connections through the gateway share the available bandwidth. This type of connection is sometimes referred to as a "multi-site" connection.
 
-:::image type="content" source="./media/design/multi-site.png" alt-text="Site-to-site VPN Gateway cross-premises connection with multiple sites." lightbox="./media/design/multi-site.png":::
+:::image type="content" source="./media/design/multi-site.png" alt-text="Diagram of site-to-site VPN Gateway cross-premises connections with multiple sites." lightbox="./media/design/multi-site.png":::
 
 ### Deployment models and methods for S2S
 
@@ -34,7 +34,7 @@ A point-to-site (P2S) VPN gateway connection lets you create a secure connection
 
 Unlike S2S connections, P2S connections don't require an on-premises public-facing IP address or a VPN device. P2S connections can be used with S2S connections through the same VPN gateway, as long as all the configuration requirements for both connections are compatible. For more information about point-to-site connections, see [About point-to-site VPN](point-to-site-about.md).
 
-:::image type="content" source="./media/vpn-gateway-howto-point-to-site-rm-ps/point-to-site-diagram.png" alt-text="Point-to-site diagram." lightbox="./media/vpn-gateway-howto-point-to-site-rm-ps/point-to-site-diagram.png":::
+:::image type="content" source="./media/vpn-gateway-howto-point-to-site-rm-ps/point-to-site-diagram.png" alt-text="Diagram of point-to-site connections." lightbox="./media/vpn-gateway-howto-point-to-site-rm-ps/point-to-site-diagram.png":::
 
 ### Deployment models and methods for P2S
 
@@ -50,7 +50,7 @@ The VNets you connect can be:
 * in the same or different subscriptions 
 * in the same or different deployment models
 
-:::image type="content" source="./media/vpn-gateway-howto-vnet-vnet-resource-manager-portal/vnet-vnet-diagram.png" alt-text="VNet-to-VNet diagram." lightbox="./media/vpn-gateway-howto-vnet-vnet-resource-manager-portal/vnet-vnet-diagram.png":::
+:::image type="content" source="./media/vpn-gateway-howto-vnet-vnet-resource-manager-portal/vnet-vnet-diagram.png" alt-text="Diagram of VNet-to-VNet connections." lightbox="./media/vpn-gateway-howto-vnet-vnet-resource-manager-portal/vnet-vnet-diagram.png":::
 
 ### Connections between deployment models
 
@@ -70,7 +70,7 @@ You may be able to use VNet peering to create your connection, as long as your v
 
 You can configure a site-to-site VPN as a secure failover path for ExpressRoute, or use site-to-site VPNs to connect to sites that aren't part of your network, but that are connected through ExpressRoute. Notice that this configuration requires two virtual network gateways for the same virtual network, one using the gateway type 'Vpn', and the other using the gateway type 'ExpressRoute'.
 
-:::image type="content" source="./media/design/expressroute-vpngateway-coexisting-connections-diagram.png" alt-text="ExpressRoute and VPN Gateway coexisting connections example." lightbox="./media/design/expressroute-vpngateway-coexisting-connections-diagram.png":::
+:::image type="content" source="./media/design/expressroute-vpngateway-coexisting-connections-diagram.png" alt-text="Diagram of ExpressRoute and VPN Gateway coexisting connections." lightbox="./media/design/expressroute-vpngateway-coexisting-connections-diagram.png":::
 
 ### Deployment models and methods for S2S and ExpressRoute coexist
 

articles/vpn-gateway/tutorial-site-to-site-portal.md

@@ -14,7 +14,7 @@ ms.date: 04/10/2023
 
 This tutorial shows you how to use the Azure portal to create a site-to-site VPN gateway connection between your on-premises network and a virtual network (VNet). You can also create this configuration using [Azure PowerShell](vpn-gateway-create-site-to-site-rm-powershell.md) or [Azure CLI](vpn-gateway-howto-site-to-site-resource-manager-cli.md).
 
-:::image type="content" source="./media/tutorial-site-to-site-portal/diagram.png" alt-text="Site-to-site VPN Gateway cross-premises connection diagram." lightbox="./media/tutorial-site-to-site-portal/diagram.png":::
+:::image type="content" source="./media/tutorial-site-to-site-portal/diagram.png" alt-text="Diagram of site-to-site VPN Gateway cross-premises connections." lightbox="./media/tutorial-site-to-site-portal/diagram.png":::
 
 In this tutorial, you learn how to:
 

articles/vpn-gateway/vpn-gateway-create-site-to-site-rm-powershell.md

@@ -24,7 +24,7 @@ This article shows you how to use PowerShell to create a site-to-site VPN gatewa
 
 A site-to-site VPN gateway connection is used to connect your on-premises network to an Azure virtual network over an IPsec/IKE (IKEv1 or IKEv2) VPN tunnel. This type of connection requires a VPN device located on-premises that has an externally facing public IP address assigned to it. For more information about VPN gateways, see [About VPN gateway](vpn-gateway-about-vpngateways.md).
 
-:::image type="content" source="./media/tutorial-site-to-site-portal/diagram.png" alt-text="Site-to-site VPN Gateway cross-premises connection diagram for PowerShell article." lightbox="./media/tutorial-site-to-site-portal/diagram.png":::
+:::image type="content" source="./media/tutorial-site-to-site-portal/diagram.png" alt-text="Diagram of site-to-site VPN Gateway cross-premises connections." lightbox="./media/tutorial-site-to-site-portal/diagram.png":::
 
 ## <a name="before"></a>Before you begin
 

articles/vpn-gateway/vpn-gateway-howto-multi-site-to-site-resource-manager-portal.md

@@ -23,7 +23,7 @@ This article helps you add additional site-to-site (S2S) connections to a VPN ga
 **About ExpressRoute/site-to-site coexisting connections**
 
 * You can use the steps in this article to add a new VPN connection to an already existing ExpressRoute/site-to-site coexisting connection.
-* You can't use the steps in this article to configure a new ExpressRoute/site-to-site coexisting connection. To create a new coexsiting connection see: [ExpressRoute/S2S coexisting connections](../expressroute/expressroute-howto-coexist-resource-manager.md).
+* You can't use the steps in this article to configure a new ExpressRoute/site-to-site coexisting connection. To create a new coexisting connection see: [ExpressRoute/S2S coexisting connections](../expressroute/expressroute-howto-coexist-resource-manager.md).
 
 ## <a name="before"></a>Prerequisites
 

articles/vpn-gateway/vpn-gateway-howto-point-to-site-rm-ps.md

@@ -14,7 +14,7 @@ ms.custom: devx-track-azurepowershell
 
 This article helps you securely connect individual clients running Windows, Linux, or macOS to an Azure VNet. Point-to-site VPN connections are useful when you want to connect to your VNet from a remote location, such when you're telecommuting from home or a conference. You can also use P2S instead of a Site-to-Site VPN when you have only a few clients that need to connect to a VNet. Point-to-site connections don't require a VPN device or a public-facing IP address. P2S creates the VPN connection over either SSTP (Secure Socket Tunneling Protocol), or IKEv2.
 
-:::image type="content" source="./media/vpn-gateway-howto-point-to-site-rm-ps/point-to-site-diagram.png" alt-text="Connect from a computer to an Azure VNet - point-to-site connection diagram":::
+:::image type="content" source="./media/vpn-gateway-howto-point-to-site-rm-ps/point-to-site-diagram.png" alt-text="Diagram of a point-to-site connection.":::
 
 For more information about point-to-site VPN, see [About point-to-site VPN](point-to-site-about.md). To create this configuration using the Azure portal, see [Configure a point-to-site VPN using the Azure portal](vpn-gateway-howto-point-to-site-resource-manager-portal.md).